1200GL bench run diagram
Moderators: Oldewing, CYBORG, robin1731, Forum Moderators
-
1200GLBoise
- Lead Member
- Posts: 3
- Joined: Thu Jun 19, 2025 7:13 pm
1200GL bench run diagram
I put together a diagram for wiring a 1200GL so it will run and charge on a bench. Does anybody want to look them over and see if they find anything wrong with them ?
You do not have the required permissions to view the files attached to this post.
-
Shadowjack
- Silver Member
- Posts: 707
- Joined: Fri May 26, 2017 11:07 am
Re: 1200GL bench run diagram
The gear switch is only connected to the ignition box so it can enable the vacuum advance in 4th and 5th. Not needed for the engine to run.
-
Fred Camper
- Vice President
- Posts: 7366
- Joined: Wed Aug 12, 2009 9:38 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Jeff+Bozeman/
- Location: Metro Detroit
- Contact:
Re: 1200GL bench run diagram
My guess is the turn signal relay is not required.
Proud member of the NGW Cartel (Rochester MI)
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'
You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'
You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig