Random image

DSCF5171

CARB REBUILD

  • OOOOORDER Gentlemen!

    • OOOOORDER Gentl…

  • Probably not a lot of you have seen this sight. For specific reasons I choose to strip down the carb COMPLETELY, witch means; I

    • Probably not a…

  • ...and this hole leading to the carb venturi. Why?

    • ...and this hol…

  • Here's one of many reasons why NOT to pull out the axles: you need to remove these screws and they are of a very special type;

    • Here's one…

  • It's impossible to see from the photo but; from new the last bit of the screw is hollow and has a very small slit, that has pr

    • It's impos…

  • Have a look behind the rubber-caps. Chances are the area is completely dry. Add oil.

    • Have a look beh…

  • Carefull with this pin. NO need to WHACK it in. Be very gentle! The floatbowl has a shape, so that when it's on, the pin is

    • Carefull with t…

  • Small small hole. Easily overlooked. Blow in air

    • Small small hol…

  • Time to check the float-level one last time

    • Time to check t…

  • AUTCH! This was loose. Don't want that, as it might suck in 'false' air. Don't know how this is supposed to work, but I

    • AUTCH!
      T…

  • Two done

    • Two done

  • Some tools I've found usefull. Wedges A feeler-gauge heated and bend for adjusting float level A pair of dividers to remove

    • Some tools I�…