Dantor's ride

This is where discussions of EFI systems, Dual Carbs, Single Carb mods and plans can be discussed and shared.

If you are working on or have a problem with stock carbs then your questions do not belong here, please post them in the Goldwing Tech Discussions Forum.

Moderators: sunnbobb, Neil, Forum Moderators

Post Reply
User avatar
Dantor
Tin Member
Tin Member
Posts: 12
Joined: Fri Nov 07, 2014 10:17 pm
Location: Marysville Wa

Dantor's ride

#1

Post by Dantor »

This is our current setup for the custom aluminum intake. It is not completed yet but soon it will be finished and ready for testing. We didnt want to do the standard "square" layout and couldnt get the tubing to bend without cracks so we angled the tubes to try and reduce air having to make a hard 90 at the ends. The hope is to balance out the air flow by softening the ends and leaving the 2 in the center as hard corners.
You do not have the required permissions to view the files attached to this post.
Top
User avatar
Mrirbic71
Silver Member
Silver Member
Posts: 897
Joined: Wed Jul 25, 2012 11:04 am
Location: New Jersey

Re: Dantor's ride

#2

Post by Mrirbic71 »

:popcornx2
Dantor wrote:This is our current setup for the custom aluminum intake. It is not completed yet but soon it will be finished and ready for testing. We didnt want to do the standard "square" layout and couldnt get the tubing to bend without cracks so we angled the tubes to try and reduce air having to make a hard 90 at the ends. The hope is to balance out the air flow by softening the ends and leaving the 2 in the center as hard corners.
1982 GL1100
Being happy ain't nothing but having something to look foward too..
No matter what I'm doing I'd rather be riding.
Top
Post Reply

Return to “Unique Carburetion”