Random image

30

GL1100I Work

Building a replacement regulator, rebuilding shocks, rewiring, and brake M/Cs and rear caliper rebuild

  • Once more for the left shock

    • Once more for t…

  • Spring clip installed

    • Spring clip ins…

  • Installing guide bushing

    • Installing guid…

  • Back-up plate A

    • Back-up plate A

  • Press seal in place as far as you can by hand, keep it straight

    • Press seal in p…

  • Use back-up plate B and tap seal in further with light hammer, rotating the shock a quarter turn each time

    • Use back-up pla…

  • Seal flush

    • Seal flush

  • Tap one side...

    • Tap one side...

  • then the other...

    • then the other.…

  • then the back...

    • then the back..…

  • and then the front, keeping the seal straight

    • and then the fr…

  • Continue until seal is fully seated and circlip slot is clear

    • Continue until…