Bluedragon

  • Pushed out into the sunlight for the first time

    • Pushed out into…

  • Forward controls for that leg over cylinder head experience

    • Forward control…

  • Long, Low and Wide

    • Long, Low and W…

  • 300 mm tyre, on centre, with shaft drive ... its possible !

    • 300 mm tyre, on…

  • Goldwing at heart, but new frame, swingarm, tank, handlebars and mud guards

    • Goldwing at hea…

  • Light tan leather seat and white oak hand grips to accent all that deep blue

    • Light tan leath…

  • It started with a 1979 GL1100, which had not run for 2 years, no starter, no brakes ...

    • It started with…

  • It didn't take long to get to the bits needed ... all parts removed were sold quickly to Wing enthusiasts across the UK ...

    • It didn't…

  • The first CAD scheme to get the proportions right ... front end raked to 45 deg, headstock brought back 5 deg to maintain trail

    • The first CAD s…

  • I built a jig stand and started out on the new frame ... 30mm CDS rolled and bent tubing ...

    • I built a jig s…

  • The rear wheel was turned down to just the cush drive ... a new bearing support tube was made and the rear disc relocated ... co

    • The rear wheel…

  • I made a new shaft, utilising Subaru CV joints ... the wheel centre plate bolts to the old disc mounting pads ...

    • I made a new sh…