Random image

before

Banzaiwing

  • In the dip. This soulution has lasted me 4-5 years and cleaned 8-10 carbs plus misc. parts. It does lose it's potency after awhi

    • In the dip. Thi…

  • disassemble others for dip. This'll take you roughly 1+ hours.

    • disassemble oth…

  • parts after being dipped and rinsed in HOT water

    • parts after bei…

  • compressed air is your friend

    • compressed air…

  • off idle fix jet, buy 4 oem #60 secondary air jets($18), drill out with #62 micro drill bit and pin vise install in place of #11

    • off idle fix je…

  • reassembled

    • reassembled

  • floats set at 21 parallel to body

    • floats set at 2…

  • polish your slides(I mean really make sure they are smooth, the smoother the better) and caps(inside and out)

    • polish your sli…

  • clean carbs 1

    • clean carbs 1

  • clean carbs 2

    • clean carbs 2

  • clean carbs 3.....Don't use any SILICONE based gasket sealers. I had to disassemble and clean this stuff out. Use yamabond4(avoi

    • clean carbs 3..…

  • clean carbs 4..The bodies came clean after dipping. Tops and bridges are polished, plenum was cleaned using Pig Snot and an Ultr

    • clean carbs 4..…