Random image

090930-2

Banzaiwing

  • Here's what you'll need. The aerosol cleaner is optional. If your chemical dip is fresh you won't need it. Notice the adaptors(b

    • Here's wha…

  • carb top disassembled, be careful with that needle.

    • carb top disass…

  • remove bowl screws

    • remove bowl scr…

  • 35 idle jet. This bugger has a SMALL orifice. If they won't come clean after soaking.......replace them.

    • 35 idle jet. Th…

  • float pin tools

    • float pin tools

  • remove float and valve

    • remove float an…

  • nozzles pushed out from venturi, I used an old model paintbrush with a wooden handle.

    • nozzles pushed…

  • tap out float pin

    • tap out float p…

  • remove aluminum puck(compressed air through pilot air jet hole), sometimes they drop out so be ready, expecially if you've alrea

    • remove aluminum…

  • remove pilot air on side of carb. be careful not to lose the spring.

    • remove pilot ai…

  • Parts going into dip, You'll be soaking your bowls too. Mine were done previously.

    • Parts going int…

  • going into dip, follow instructions,I let soak 30 minutes+. I rinsed with HOT water in laundry tub.

    • going into dip,…