NGWClub®, Inc.

Has anyone put a chrome CB750K rear fender on a GL1100? I've done the CB900C front conversion, but never a rear. Anyone?

looks something like this ...

I did one from a HD but never a 750. If I remember right so long as it is 7 1/4 wide it should fit up fairly easy

Whiskerfish wrote: ↑Fri Dec 20, 2024 8:06 pm I did one from a HD but never a 750. If I remember right so long as it is 7 1/4 wide it should fit up fairly easy

Is the 7 1/4 at the wide flat section with the mounting holes or the back curved section covering the wheel and holding the taillight?

Between the frame rails

Speaking of front fenders, does anyone happen to know if a CX500C front fender will work on the GL1100? Both have 19" front wheels, but the width and mounting points might be different. I've done a CB900C fender before with a small adapter plate.

Just looking for options.

Here's my now sold 1981 GL1100 Standard with the early GL1000 front fender which was a bolt straight on the forks. The clearance was a little tight around the top of the tire, yet I never had any issues with rubbing or rain evacuation from the fender.
The CX500C I can't comment there on the fit of that fender.

Hello to Canada,
last year I fitted a front fender from a CX500C to my GL1000 (with the later fork). Fits 1:1 to the fork.

here the old condition with GL1000 front fender and here the conversion to the slim CX500C front fender. greetings Harald