I managed to destroy the "box assembly" on my 79 Wing, yunno the speedo drive unit on the front wheel that turns the speedo cable.
I wonder if anyone could duplicate what happened. I was pumping the front end to see if the forks seals were leaking. They were dry so I backed out of the driveway and drove a few feet snapping the speedo cable and breaking off the blade in the box assembly that drives the cable. The combination of pumping and backing up had moved the unit to an unnatural position which broke the parts mentioned. The assembly pivots so as to not strain the cable while riding. Good times.
Don't do this
Moderators: Oldewing, CYBORG, robin1731, Forum Moderators
- Dirty Dave
- Silver Member
- Posts: 727
- Joined: Thu Jul 19, 2012 6:27 pm
- Location: Montreal, Canada
Don't do this
1979 GL1000
1997 Honda Valkyrie
2018 Kawasaki Z900 RS
1975 CB750F (sold & dead)
1978 Gl1000 (sold & sleeping)
1984 Aspencade (sold)
1997 Honda Valkyrie
2018 Kawasaki Z900 RS
1975 CB750F (sold & dead)
1978 Gl1000 (sold & sleeping)
1984 Aspencade (sold)
- Old Fogey
- Honored Life Member
- Posts: 7759
- Joined: Mon Aug 27, 2007 11:31 pm
- Location: Glasgow, Scotland
- Contact:
Re: Don't do this
No it doesn't. It stays stationary.. If it's rotating, your axle nut is not tight enough.
"Impossible Is Just a Level of Difficulty!..."
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous!
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous!
- Whiskerfish
- President
- Posts: 37503
- Joined: Thu Feb 16, 2006 9:34 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
- Location: Norfolk Va
Re: Don't do this
There is a very small tab on the bottom of the RH fork that the box should rest against to prevent it from rotating.
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
- Dirty Dave
- Silver Member
- Posts: 727
- Joined: Thu Jul 19, 2012 6:27 pm
- Location: Montreal, Canada
Re: Don't do this
Yeah, just checked my friends 76. On the 78/9 it's on the left side. Another over-think on my part. Wanted the wheel on the axle smooth with no play but not too tight. I'm gonna wreck this bike yet........
1979 GL1000
1997 Honda Valkyrie
2018 Kawasaki Z900 RS
1975 CB750F (sold & dead)
1978 Gl1000 (sold & sleeping)
1984 Aspencade (sold)
1997 Honda Valkyrie
2018 Kawasaki Z900 RS
1975 CB750F (sold & dead)
1978 Gl1000 (sold & sleeping)
1984 Aspencade (sold)
- Dirty Dave
- Silver Member
- Posts: 727
- Joined: Thu Jul 19, 2012 6:27 pm
- Location: Montreal, Canada
Re: Don't do this
This group has is great. Couldn't find a a stop tab although I remembered one in the past. Checked my spare Comstar with the spare box assembly as well but I do have a beer with a shot of Jameson in me..... Snugged up the axle and re-torqued the fork/axle nuts. No play & good to go with the box. Thanks guys. What can I break next?
1979 GL1000
1997 Honda Valkyrie
2018 Kawasaki Z900 RS
1975 CB750F (sold & dead)
1978 Gl1000 (sold & sleeping)
1984 Aspencade (sold)
1997 Honda Valkyrie
2018 Kawasaki Z900 RS
1975 CB750F (sold & dead)
1978 Gl1000 (sold & sleeping)
1984 Aspencade (sold)
- jdvorchak
- Honored Life Member
- Posts: 5238
- Joined: Mon May 25, 2009 8:01 pm
- Location: East Alton, IL
Re: Don't do this
Lucky you didn't ride it with the front wheel loose. Could have been posting this from the ER!
New users please visit our "Shop Talk" for common tips and help:
http://ngwclub.com/forum/page/ST
Don't fix it 'til it's broke...
The person with the most toys wins!
If it has wheels or a skirt you can't afford it.
Amateur Radio Station WW9L
71 CL350 with Bingham side car
2021 HD Triglide
2008 HD Dyna Low Rider
83 KZ1100L1 Son totaled it
83 KZ550LTD Shaft sold
Previous bikes: 84 GL1200 STD, 83 KZ550LTD, 83 CB1000, 78 CB400A, 82 CB900F, 79 CB750K, 2001 GL1800, 2000 Dyna Super Glide, 1972 CB350 K4, 1985 GL1200A, 1997 1200 Sportster, 84 GL1200I, 82 Honda CM400E, 81 Suzuki GS650L, 72 Triumph Bonneville 750, 72 Honda CB350, 66(?) Honda 305 Scrambler, 6? Yamaha yz250, 62 650 Matchless (Norton-Villers).
John
http://ngwclub.com/forum/page/ST
Don't fix it 'til it's broke...
The person with the most toys wins!
If it has wheels or a skirt you can't afford it.
Amateur Radio Station WW9L
71 CL350 with Bingham side car
2021 HD Triglide
2008 HD Dyna Low Rider
83 KZ1100L1 Son totaled it
83 KZ550LTD Shaft sold
Previous bikes: 84 GL1200 STD, 83 KZ550LTD, 83 CB1000, 78 CB400A, 82 CB900F, 79 CB750K, 2001 GL1800, 2000 Dyna Super Glide, 1972 CB350 K4, 1985 GL1200A, 1997 1200 Sportster, 84 GL1200I, 82 Honda CM400E, 81 Suzuki GS650L, 72 Triumph Bonneville 750, 72 Honda CB350, 66(?) Honda 305 Scrambler, 6? Yamaha yz250, 62 650 Matchless (Norton-Villers).
John
- Dirty Dave
- Silver Member
- Posts: 727
- Joined: Thu Jul 19, 2012 6:27 pm
- Location: Montreal, Canada
Re: Don't do this
That's the funny part. Made sure the wheel was snug, no play. Guess tighter was needed to squeeze the box. Been riding since the 70s and still in one piece. (OK, I crashed on the 3 month mark)
1979 GL1000
1997 Honda Valkyrie
2018 Kawasaki Z900 RS
1975 CB750F (sold & dead)
1978 Gl1000 (sold & sleeping)
1984 Aspencade (sold)
1997 Honda Valkyrie
2018 Kawasaki Z900 RS
1975 CB750F (sold & dead)
1978 Gl1000 (sold & sleeping)
1984 Aspencade (sold)
-
- Similar Topics
- Replies
- Views
- Last post