NGWClub®, Inc.

Are their conversion kits for Wings any good? The guy I bought my bike from has a couple for sale for $30. Waste of money?

Only if it doesn't work

Generally they had a real good reputation

tks guys. worth taking a chance on.

For 30 a copy if the kits are complete I certainly would.

Whiskerfish wrote:For 30 a copy if the kits are complete I certainly would.

He's asking $30 for both.
Here is a pic from his add. Is everything there?

I have never installed that make but I see a rotor, a pickup, and a processing box. That should be about all that is needed.

Tks Whiskerfish. Waiting to hear back from him.

My GL1000 came to me with a Martek installed.
I would ask to see the Installation instructions if there are some with the kits, please.

Sent you a PM

Toehead wrote:Sent you a PM

replied.

I dug up the instructions after wandering around in the internet for quite a while. Maybe we can put them in shoptalk, because these were really hard to find.

Toehead wrote:I dug up the instructions after wandering around in the internet for quite a while. Maybe we can put them in shoptalk, because these were really hard to find.

martek1.jpg

martek2.jpg

thank you sir.

Toehead wrote:I dug up the instructions after wandering around in the internet for quite a while. Maybe we can put them in shoptalk, because these were really hard to find.

Now In the reference diagram forum
http://www.ngwclub.com/forum/viewtopic. ... 58#p678158

gltriker wrote:My GL1000 came to me with a Martek installed.
I would ask to see the Installation instructions if there are some with the kits, please.

would it be possible for you to post a pic or two of how the ignition is hooked up? The guy I bought them from didn't have the instructions and the instructions Toehead posted don't look to be for this model.