Page 1 of 10

BRADSHAW BIKES POLISHING & RESTORATION CATALOG 2016

Posted: Sun Nov 04, 2012 3:00 am
by sunnbobb
BB3.jpg
BB3.jpg (85.21 KiB) Viewed 18017 times
BRADSHAW BIKES POLISHING AND BIKE RESTORATION SERVICES

POLISHING SERVICE

CARB TOPS (set) $50
INTAKES (set) $40
TIMING BELT COVERS (pair) (any year) $57
GL1000 Valve covers (pair) $57
GL1100 Valve covers (pair) (Includes new painted emblems) $57
GL1200 Valve covers (pair) (Includes new painted emblems) $57
FRONT FORK LOWERS (pair) (75-82) $90
FRONT TRAC FORK LOWER (pair) (83-87) $95
OIL FILTER COVER $20
1200 FORK BRACE $25
POINTS COVER $15
FRONT WHEEL HUB $35
REAR WHEEL HUB $65
TRIPLE TREE $175
CLUTCH COVER $38
FINAL DRIVE $285
SHOCK MOUNT $15

POLISHED PARTS (WE SUPPLY THE PART)

GL1000/1100 Valve cover set $95 (except 83)
83 GL1100 Valve cover set $110 (No "made in Japan" on cover)
GL1000/1100 Timing Belt cover set $90
GL1000/1100 Intake Manifold set $85
Tach/fuel pump fitting $35
Points cover $25
Fork lowers $105
Thermostat Housing and pipe fittings $95
Water pump cover $25
Right side inspection plate $35
Oil sump cover $25
Oil filter cover $45
Clutch Cover $40
Final Drive $225
GL1000 right rear lower shock mount $25
Polished Fork Brace $165
"VYPER" handles set $85
TAROZZI FORK BRACE POLISHED $189

OTHER SERVICES

4 lbs of fasteners run through our tumbler $25 shipped
HIGH TEMP POWDER COAT HEADERS (1000 degree rated) Choice of black or silver $100

HYDRAULIC CLUTCH CONVERSION Kit $195

To order, pm or email Sunnbobb@gmail.com your part list. We will send you a paypal invoice with the amount due and the shipping address. In most cases we strive for less than 14 day turn around.


CATALOG

CARB TOPS (set) $45
bd carbs rebuilt finished.jpg
bd carbs rebuilt finished.jpg (60.17 KiB) Viewed 18017 times
INTAKES (set) $38
polished parts - Intakes.jpg
polished parts - Intakes.jpg (72.93 KiB) Viewed 18017 times
TIMING BELT COVERS (pair) (any year) $59
1 polishing Timing belt covers.jpg
1 polishing Timing belt covers.jpg (65.82 KiB) Viewed 18017 times
Polished GL1200 Timing Belt Covers.jpg
Polished GL1200 Timing Belt Covers.jpg (84.86 KiB) Viewed 18017 times
GL1000 Valve covers (pair) $50
gl1000 valve covers polished.jpg
gl1000 valve covers polished.jpg (61.56 KiB) Viewed 18017 times
GL1100 Valve covers (pair) (Includes new painted emblems) $55
gl1100 polished covers.jpg
gl1100 polished covers.jpg (80.07 KiB) Viewed 18017 times
GL1200 Valve covers (pair) (Includes new painted emblems) $55
gl1200 polished vavle cover small.jpg
gl1200 polished vavle cover small.jpg (208.22 KiB) Viewed 18017 times
FRONT FORK LOWERS (pair) (75-83) $75
POLISHED FORKS.jpg
POLISHED FORKS.jpg (81.95 KiB) Viewed 18017 times
POINTS COVER $15
FRONT WHEEL HUB $35
BD Front Hub 1 2.jpg
BD Front Hub 1 2.jpg (60.89 KiB) Viewed 18017 times
REAR WHEEL HUB $65
bd rear wheel.jpg
bd rear wheel.jpg (87.38 KiB) Viewed 18017 times
TRIPLE TREE $145
triple-tree.jpg
triple-tree.jpg (107.63 KiB) Viewed 18017 times
CLUTCH COVER $38
84 clutch cover polished.jpg
84 clutch cover polished.jpg (38.17 KiB) Viewed 18017 times
POLISHED PARTS (WE SUPPLY THE PART)

Tach/fuel pump fitting $35
polished fuel pump mount 1.jpg
polished fuel pump mount 1.jpg (77.08 KiB) Viewed 18017 times
POLISH FUEL.jpg
POLISH FUEL.jpg (44.7 KiB) Viewed 18017 times
Points cover $15

Fork lowers $105
POLISHED FORKS.jpg
POLISHED FORKS.jpg (81.95 KiB) Viewed 18017 times
Thermostat Housing and pipe fittings $95
POLISH WATER PUMP.jpg
POLISH WATER PUMP.jpg (39.8 KiB) Viewed 18017 times
Water pump cover $25


Right side inspection plate $35
polish inspection plate.jpg
polish inspection plate.jpg (61.89 KiB) Viewed 18017 times
Oil sump cover $25
polish sump cover.jpg
polish sump cover.jpg (61.34 KiB) Viewed 18017 times
Oil filter cover $35

Clutch Cover $40
84 clutch cover polished.jpg
84 clutch cover polished.jpg (38.17 KiB) Viewed 18017 times
Final Drive $225 (yours $185)
bd final polished.jpg
bd final polished.jpg (49.51 KiB) Viewed 18017 times
4 lbs of fasteners run through our tumbler $25 shipped
fasteners1 after.jpg
fasteners1 after.jpg (55.9 KiB) Viewed 18017 times
HIGH TEMP POWDER COAT HEADERS Choice of black or silver $105
headers.jpg
headers.jpg (55.86 KiB) Viewed 18017 times
Turned Brake Disks $110 (set of 3)
Drilled $35 per rotor
polished disked.jpg
polished disked.jpg (31.24 KiB) Viewed 18017 times
bd front wheel with brake 1.jpg
bd front wheel with brake 1.jpg (70.01 KiB) Viewed 18017 times
"VYPER" HANDLES $85 set
vyper.jpg
vyper.jpg (64.39 KiB) Viewed 18017 times
Tarozzi polished fork brace (GL1000 - GL1100) $189
terozzi.jpg
terozzi.jpg (29.63 KiB) Viewed 17093 times
HYDRAULIC CLUTCH CONVERSION KIT $195
This is a kit for converting your cable driven clutch to a later style hydraulic clutch. Included in this kit:

1 refinished Clutch Cover w/ new Honda OEM seal painted either aluminum or black - polished add $20
1 Rebuilt Hydraulic Slave Cylinder new seals, spring etc.
1 New 48" Stainless Steel AN3 line
1 New Male to Male AN3/10mm connector
1 New Clutch Cover Gasket
1 New Custom made Stainless Steel push rod

This kit is ready to hookup to a Hydraulic Master Cylinder. Simply remove the old clutch and install this one and install the master of your choosing. You will also need a 10mm x 3AN banjo adapter with the angle of your choice, and a 10mm banjo bolt if you are using the gl1200 master cylinder. T All parts have been professionally reconditioned and rebuilt to like new specification.



Image

GOLDWING ART PRINTS

8x10 $15
8x10 matted $20
Price includes delivery
gwret1copy.jpg
gwret1copy.jpg (65.41 KiB) Viewed 17862 times

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Sun Nov 04, 2012 9:21 am
by gregforesi
I don't know about the rest of the parts, but I do know that's a good deal on a final drive.

I had an "amateur polishing moment" yesterday involving a flying carb top. As a result I'm thinking of installing a padded cell for polishing. I just gotta figure out how to hold the parts when I've got the belted white jacket on.

Inside my padded room no one will hear me crying.

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Sun Nov 04, 2012 9:24 am
by AODRN
I'm sold. Where do I send my stuff?

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Sun Nov 04, 2012 9:26 am
by Pony Ruiz
Wow

nice stuff.

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Sun Nov 04, 2012 11:28 am
by Roady
Now there's a catalog I could browse through for the entire winter.

Blingage!

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Sun Nov 04, 2012 11:46 am
by sunnbobb
I thought it was about time I pulled everything into one post. :)

I forgot to mention ordering info. Added to the first post.

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Tue Nov 13, 2012 5:50 pm
by Gowing
Those parts look fantastic,
How do, for instance, the fork legs and valve covers wear?
That is polished aluminum right?
It looks like chrome. Do they slowly paternal and corrode?
Thanks dave

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Tue Nov 13, 2012 6:36 pm
by Roady
I'm hoping you meant patina. Paternal is something my father did ... ;)

Bradshaw did my parts and all I've had to do is rub them down every other month with aluminum polish. Still look like sterling silver.

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Tue Nov 13, 2012 8:25 pm
by sunnbobb
Nothing like a testimonial.. thanks Roady!

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Mon Nov 19, 2012 4:24 pm
by sunnbobb
And another happy customer! Thanks Dritzman!

After:
polished gl1000 set.jpg
polished gl1000 set.jpg (79.69 KiB) Viewed 17879 times
polished gl1000 forks.jpg
polished gl1000 forks.jpg (73.19 KiB) Viewed 17879 times

Before:
polish before 1.jpg
polish before 1.jpg (56.95 KiB) Viewed 17879 times
polish before 2.jpg
polish before 2.jpg (64.64 KiB) Viewed 17879 times
polish before 3.jpg
polish before 3.jpg (56.74 KiB) Viewed 17879 times

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Sat Dec 15, 2012 2:25 am
by sunnbobb
Shameless bump

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Sat Dec 15, 2012 6:34 pm
by turboter
Sunnbobb,
Looks like great work!
Just wondering if you have ever thought of expanding,like polishing early honda cb 750 engine parts?

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Sun Dec 16, 2012 2:08 am
by sunnbobb
turbo, I frequently do parts for other bikes, but have not, as yet, cataloged them.

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Sun Dec 16, 2012 12:47 pm
by northwood
After polishing, do you clearcoat the parts? To keep them looking good?

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

Posted: Sun Dec 16, 2012 12:51 pm
by sunnbobb
NW, we do not. There is controversy regarding the practice. I fear that clear coat would trap moisture underneath and make it hard to keep them looking nice. I have found just a wipe of metal polish once in a while will keep them looking bright. I have wanted to try a crystal clear power coat though...