thanks
dk
Whats the bolt size?
Moderators: Whiskerfish, Forum Moderators
-
tyring59
- Cast Iron Member
- Posts: 63
- Joined: Mon May 15, 2006 10:50 am
- Location: kelowna bc
Whats the bolt size?
What is the bolt size the holds the rear seat grab rail in place? Also what is the bolt size an threading that that conects up the carbs to the cylinder head?
thanks
dk
thanks
dk
-
Whiskerfish
- President
- Posts: 38094
- Joined: Thu Feb 16, 2006 9:34 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
- Location: Norfolk Va
The grab rail "Hex bolts" that go into the Fender standoff bolts are a 7x45 by 1.25 thread
The Intake to Head "Cap bolts" are 6x32 by 1.0 thread.
The Intake to Head "Cap bolts" are 6x32 by 1.0 thread.
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
