SlyDog's '82 GL1100 restoration project - MAKE IT NAKED!!
Moderators: Brant, Sagebrush, Forum Moderators
-
- Cast Iron Member
- Posts: 97
- Joined: Tue Sep 15, 2009 10:19 pm
- Location: Peoria, Illinois
Re: SlyDog's '82 GL1100 restoration project - MAKE IT NAKED!
I don't see that anyone answered your question about what a headlight bucket is. It is the bowl shaped housing that the headlight is mounted into. It is usually supported by "ears" that are quite often slid onto the front forks as they are assembled to the triple tree. Frequently large amounts of your wiring are hidden behind the headlight within the bucket.
1977 GL1000 fully dressed next project
1977 GL1000 black basket case
1978 CB750K red recently restored
1978 CB750K black recently restored
1978 CB750F black nearly complete
1980 Kawasaki KZ750LTD
2007 Royal Star Tour Deluxe daily rider
2008 Kymco scooter - wife's
1977 GL1000 black basket case
1978 CB750K red recently restored
1978 CB750K black recently restored
1978 CB750F black nearly complete
1980 Kawasaki KZ750LTD
2007 Royal Star Tour Deluxe daily rider
2008 Kymco scooter - wife's
- sunnbobb
- Facebook Admin
- Posts: 21323
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: SlyDog's '82 GL1100 restoration project - MAKE IT NAKED!
Someone should jump on that seat. I believe those are the ones that have internal springs and are super comfy.. for a bagger...
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
- Roady
- Member Relations &_Graphics
- Posts: 11957
- Joined: Wed Jun 20, 2007 2:35 pm
- Location: Port St. John, FL
Re: SlyDog's '82 GL1100 restoration project - MAKE IT NAKED!
Front End Renewal Project will walk you through the radiator. It's in ShopTalk too.
- SlyDogJeff77
- Titanium Member
- Posts: 472
- Joined: Fri Jun 17, 2011 11:24 am
- Location: Albany, New York
Re: SlyDog's '82 GL1100 restoration project - MAKE IT NAKED!
Been laid up for the past 2 days. Out of no where I caught a nasty sinus cold. Anyway. I got out bid on a newly and professionally rebuild set of carbs ("Bolt on ready") so now I'll have to save up enough for Randakk's rebuilt kit.
Anyway, I had enough energy to tackle some of the wires in the front. Also drained the radiator. I also power washed the bike Monday night before I got sick.
I'm fearful that this is quickly turning into a long term project that I wanted to be over already.
Anyway, I had enough energy to tackle some of the wires in the front. Also drained the radiator. I also power washed the bike Monday night before I got sick.

I'm fearful that this is quickly turning into a long term project that I wanted to be over already.
You do not have the required permissions to view the files attached to this post.
Life is short! Live it now because today will NEVER happen again!
My 1983 GL1100 restoration Project (In Progress) 3rd times the charm!
https://www.ngwclub.com/forum/viewtopic ... 30&t=72987
My 1980 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=52276
My 1982 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=34697
My 1983 GL1100 restoration Project (In Progress) 3rd times the charm!
https://www.ngwclub.com/forum/viewtopic ... 30&t=72987
My 1980 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=52276
My 1982 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=34697
- SlyDogJeff77
- Titanium Member
- Posts: 472
- Joined: Fri Jun 17, 2011 11:24 am
- Location: Albany, New York
Re: SlyDog's '82 GL1100 restoration project - MAKE IT NAKED!
hard to see but i'm going to try and hide most of this mess inside the shroud / false tank. I'll fabricate some kind of metal shield for it so the wires don't get rubbed by the false tank or anything.
You do not have the required permissions to view the files attached to this post.
Life is short! Live it now because today will NEVER happen again!
My 1983 GL1100 restoration Project (In Progress) 3rd times the charm!
https://www.ngwclub.com/forum/viewtopic ... 30&t=72987
My 1980 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=52276
My 1982 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=34697
My 1983 GL1100 restoration Project (In Progress) 3rd times the charm!
https://www.ngwclub.com/forum/viewtopic ... 30&t=72987
My 1980 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=52276
My 1982 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=34697
- SlyDogJeff77
- Titanium Member
- Posts: 472
- Joined: Fri Jun 17, 2011 11:24 am
- Location: Albany, New York
Re: SlyDog's '82 GL1100 restoration project - MAKE IT NAKED!
More Parts are piling up!! Anyone interested? I'm going to start some ebay auctions for this stuff. LOT's to go around.
I was hoping to get enough $$$ to afford Randakk's rebuild kit.
-Beat up Fairing
-old windshield with vent
-saddle bags that don't have the weather strip any more and the covers blow off
-trunk (the bottom isn't even real.. if you look at the first pic in this thread, it's some fiberglass box my dad slapped on) with real top and luggage rack
-saddle bag rack (chrome but rusty)
-rear bumper (trunk sits on this part)
too much to list..
Oh, I took the radio out, second hand cb, and the fairing wireing harness. I'm keeping the harness because i'll need it for the headlight and turn signals. So the Fairing is completely empty. Other than the harness, you can have all the junk that goes with it.
I was hoping to get enough $$$ to afford Randakk's rebuild kit.
-Beat up Fairing
-old windshield with vent
-saddle bags that don't have the weather strip any more and the covers blow off
-trunk (the bottom isn't even real.. if you look at the first pic in this thread, it's some fiberglass box my dad slapped on) with real top and luggage rack
-saddle bag rack (chrome but rusty)
-rear bumper (trunk sits on this part)
too much to list..
Oh, I took the radio out, second hand cb, and the fairing wireing harness. I'm keeping the harness because i'll need it for the headlight and turn signals. So the Fairing is completely empty. Other than the harness, you can have all the junk that goes with it.
You do not have the required permissions to view the files attached to this post.
Life is short! Live it now because today will NEVER happen again!
My 1983 GL1100 restoration Project (In Progress) 3rd times the charm!
https://www.ngwclub.com/forum/viewtopic ... 30&t=72987
My 1980 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=52276
My 1982 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=34697
My 1983 GL1100 restoration Project (In Progress) 3rd times the charm!
https://www.ngwclub.com/forum/viewtopic ... 30&t=72987
My 1980 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=52276
My 1982 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=34697
- SlyDogJeff77
- Titanium Member
- Posts: 472
- Joined: Fri Jun 17, 2011 11:24 am
- Location: Albany, New York
Re: SlyDog's '82 GL1100 restoration project - MAKE IT NAKED!
Anyone know what this lone green wire is?
You do not have the required permissions to view the files attached to this post.
Life is short! Live it now because today will NEVER happen again!
My 1983 GL1100 restoration Project (In Progress) 3rd times the charm!
https://www.ngwclub.com/forum/viewtopic ... 30&t=72987
My 1980 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=52276
My 1982 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=34697
My 1983 GL1100 restoration Project (In Progress) 3rd times the charm!
https://www.ngwclub.com/forum/viewtopic ... 30&t=72987
My 1980 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=52276
My 1982 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=34697
- SlyDogJeff77
- Titanium Member
- Posts: 472
- Joined: Fri Jun 17, 2011 11:24 am
- Location: Albany, New York
Re: SlyDog's '82 GL1100 restoration project - MAKE IT NAKED!
This is after the power wash but before i emptied the radiator and cleaned up the wiring at the front.
You do not have the required permissions to view the files attached to this post.
Life is short! Live it now because today will NEVER happen again!
My 1983 GL1100 restoration Project (In Progress) 3rd times the charm!
https://www.ngwclub.com/forum/viewtopic ... 30&t=72987
My 1980 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=52276
My 1982 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=34697
My 1983 GL1100 restoration Project (In Progress) 3rd times the charm!
https://www.ngwclub.com/forum/viewtopic ... 30&t=72987
My 1980 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=52276
My 1982 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=34697
- robin1731
- Membership Admin
- Posts: 21858
- Joined: Mon May 29, 2006 8:31 am
- Location: Decatur, Indiana
Re: SlyDog's '82 GL1100 restoration project - MAKE IT NAKED!
Honda uses green for ground. Hard to say what that one goes to from here.SlyDogJeff77 wrote:Anyone know what this lone green wire is?
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
- SlyDogJeff77
- Titanium Member
- Posts: 472
- Joined: Fri Jun 17, 2011 11:24 am
- Location: Albany, New York
Re: SlyDog's '82 GL1100 restoration project - MAKE IT NAKED!
It is a SOOOOOPER comfy seatsunnbobb wrote:Someone should jump on that seat. I believe those are the ones that have internal springs and are super comfy.. for a bagger...

Life is short! Live it now because today will NEVER happen again!
My 1983 GL1100 restoration Project (In Progress) 3rd times the charm!
https://www.ngwclub.com/forum/viewtopic ... 30&t=72987
My 1980 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=52276
My 1982 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=34697
My 1983 GL1100 restoration Project (In Progress) 3rd times the charm!
https://www.ngwclub.com/forum/viewtopic ... 30&t=72987
My 1980 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=52276
My 1982 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=34697
- SlyDogJeff77
- Titanium Member
- Posts: 472
- Joined: Fri Jun 17, 2011 11:24 am
- Location: Albany, New York
Re: SlyDog's '82 GL1100 restoration project - MAKE IT NAKED!
After i use Randakk's kit and rebuild the carb, will it be safe to ride to my mechanic (about 10 miles) and have him sync the carbs? I don't have the vacuum meters to do it.
Life is short! Live it now because today will NEVER happen again!
My 1983 GL1100 restoration Project (In Progress) 3rd times the charm!
https://www.ngwclub.com/forum/viewtopic ... 30&t=72987
My 1980 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=52276
My 1982 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=34697
My 1983 GL1100 restoration Project (In Progress) 3rd times the charm!
https://www.ngwclub.com/forum/viewtopic ... 30&t=72987
My 1980 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=52276
My 1982 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=34697
- robin1731
- Membership Admin
- Posts: 21858
- Joined: Mon May 29, 2006 8:31 am
- Location: Decatur, Indiana
Re: SlyDog's '82 GL1100 restoration project - MAKE IT NAKED!
SlyDogJeff77 wrote:After i use Randakk's kit and rebuild the carb, will it be safe to ride to my mechanic (about 10 miles) and have him sync the carbs? I don't have the vacuum meters to do it.
Yeah, that won't hurt it at all.
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
- roncar
- Vice President
- Posts: 4856
- Joined: Sat Jan 05, 2008 4:30 pm
- My Album: http://www.ngwclub.com/gallery3/index.p ... s/roncarGL
- Location: Lakeland, Florida
Re: SlyDog's '82 GL1100 restoration project - MAKE IT NAKED!
That is a ground for a turn signal flasher that has 3 terminals. Not used on US models we use 2 terminal flashers.SlyDogJeff77 wrote:Anyone know what this lone green wire is?
- lt1
- Titanium Member
- Posts: 394
- Joined: Sun Dec 28, 2008 12:14 am
- Location: AZ
Re: SlyDog's '82 GL1100 restoration project - MAKE IT NAKED!
Oh,well. I looked around quite a bit and burned up 2 flasher units before finding a 3-prong that worked.Anyone know what this lone green wire is?
That is a ground for a turn signal flasher that has 3 terminals. Not used on US models we use 2 terminal flashers.

82 GL1100 Standard/RatBike
83 GL650 Interstate
83 GL650 Interstate
- SlyDogJeff77
- Titanium Member
- Posts: 472
- Joined: Fri Jun 17, 2011 11:24 am
- Location: Albany, New York
Re: SlyDog's '82 GL1100 restoration project - MAKE IT NAKED!
OK so, I'm about to enter the world of EBAY and start selling some of this stuff to afford Randakk's kit and oil and .... yea.. all that..
FUNDS are LOW..
So I'm giving everyone on the Naked Gold Wing site first dibbs.
http://s74.photobucket.com/albums/i262/ ... or%20Sale/
I've been using photobucket for ages. They are free and easy to use.
I haven't put any descriptions on any of these photos yet, you guys all know this stuff better than me anyway. I'll entertain any offer. Just don't treat me like a fool. I'm not selling the front fairing for 5 bucks. You pay for shipping and I'll ship it.
I'm going to start selling on ebay next week.
FUNDS are LOW..
So I'm giving everyone on the Naked Gold Wing site first dibbs.
http://s74.photobucket.com/albums/i262/ ... or%20Sale/
I've been using photobucket for ages. They are free and easy to use.
I haven't put any descriptions on any of these photos yet, you guys all know this stuff better than me anyway. I'll entertain any offer. Just don't treat me like a fool. I'm not selling the front fairing for 5 bucks. You pay for shipping and I'll ship it.
I'm going to start selling on ebay next week.
Life is short! Live it now because today will NEVER happen again!
My 1983 GL1100 restoration Project (In Progress) 3rd times the charm!
https://www.ngwclub.com/forum/viewtopic ... 30&t=72987
My 1980 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=52276
My 1982 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=34697
My 1983 GL1100 restoration Project (In Progress) 3rd times the charm!
https://www.ngwclub.com/forum/viewtopic ... 30&t=72987
My 1980 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=52276
My 1982 GL1100 restoration project (DEAD) and sad...
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=34697