2026 NGW Calendars are ready to order here
https://ngwclub.com/forum/viewtopic.php?t=79383#p834018

The 'Humpty Dumpty' refresh, now named 'Grumpy'

A forum for stories, pics and updates of your resto's. Be it a barn find, Grampas hand me down or a bike being brought back to it's former glory.If you are restoring it, show us your stuff!

Moderators: Brant, Sagebrush, Forum Moderators

Post Reply
User avatar
Track T 2411
Honored Life Member
Honored Life Member
Posts: 8791
Joined: Thu May 29, 2008 9:37 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
Location: Prairie du Sac Wisconsin

Re: The 'Humpty Dumpty' refresh.

#16

Post by Track T 2411 »

20160309_135823.jpg
20160309_135849.jpg
Wednesday, March 9th. On go the carbs! These carbs are from the first Wing I bought, an '82. I had rebuilt them a few years ago, and polished up the intakes and caps. They sat on a shelf, just waiting for this opportunity. Bolt on and go! Or so I thought...
You do not have the required permissions to view the files attached to this post.
"I have no special talent. I am only passionately curious." - Albert Einstein

"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow

"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown

Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!

Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!

In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
User avatar
Track T 2411
Honored Life Member
Honored Life Member
Posts: 8791
Joined: Thu May 29, 2008 9:37 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
Location: Prairie du Sac Wisconsin

Re: The 'Humpty Dumpty' refresh.

#17

Post by Track T 2411 »

20160320_115258.jpg
Sunday, March 20th. A little RTV, anyone?
20160320_154544.jpg
20160320_154640.jpg
I like to set the valves at the same time as doing the belts. After setting the crank, I back off the rockers so there's no chance of inference.
You do not have the required permissions to view the files attached to this post.
"I have no special talent. I am only passionately curious." - Albert Einstein

"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow

"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown

Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!

Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!

In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
User avatar
Track T 2411
Honored Life Member
Honored Life Member
Posts: 8791
Joined: Thu May 29, 2008 9:37 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
Location: Prairie du Sac Wisconsin

Re: The 'Humpty Dumpty' refresh.

#18

Post by Track T 2411 »

Up until this point, I had been working on this in my stepson's rented garage. I found out that day that I needed to move the bike ASAP. Fortunately, the weather had finally broken, and the engine was back together. It didn't take me long to throw the front and rear suspension together enough to make it a roller.
"I have no special talent. I am only passionately curious." - Albert Einstein

"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow

"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown

Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!

Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!

In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
User avatar
Track T 2411
Honored Life Member
Honored Life Member
Posts: 8791
Joined: Thu May 29, 2008 9:37 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
Location: Prairie du Sac Wisconsin

Re: The 'Humpty Dumpty' refresh.

#19

Post by Track T 2411 »

20160328_140329.jpg
Monday, March 28th. First light! She's finally home, where she belongs. My work truck, in the background, conveniently has a lift gate that works very nicely to move a motorcycle, lol! Just don't tell my boss...
You do not have the required permissions to view the files attached to this post.
"I have no special talent. I am only passionately curious." - Albert Einstein

"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow

"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown

Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!

Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!

In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
User avatar
Track T 2411
Honored Life Member
Honored Life Member
Posts: 8791
Joined: Thu May 29, 2008 9:37 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
Location: Prairie du Sac Wisconsin

Re: The 'Humpty Dumpty' refresh.

#20

Post by Track T 2411 »

20160417_184321.jpg
20160417_184350.jpg
20160417_184548.jpg
Sunday, April 17th. Getting her ready for her first fire! I wasn't sure if I'd have wiring issues that might postpone the event, but she ran!
You do not have the required permissions to view the files attached to this post.
"I have no special talent. I am only passionately curious." - Albert Einstein

"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow

"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown

Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!

Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!

In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
User avatar
Track T 2411
Honored Life Member
Honored Life Member
Posts: 8791
Joined: Thu May 29, 2008 9:37 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
Location: Prairie du Sac Wisconsin

Re: The 'Humpty Dumpty' refresh.

#21

Post by Track T 2411 »

20161231_132041.jpg
20160423_092223.jpg
20160423_092244.jpg
April 23rd. Not sure why, but the entire wiring harness was repaired at some point, and while it looks like some of it was done fairly well, there were also several 'scotchlocs' in the mix, and the melted fuse box was the kicker. Time for a transplant!
You do not have the required permissions to view the files attached to this post.
"I have no special talent. I am only passionately curious." - Albert Einstein

"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow

"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown

Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!

Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!

In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
User avatar
Track T 2411
Honored Life Member
Honored Life Member
Posts: 8791
Joined: Thu May 29, 2008 9:37 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
Location: Prairie du Sac Wisconsin

Re: The 'Humpty Dumpty' refresh.

#22

Post by Track T 2411 »

20160602_082733.jpg
20160602_095200.jpg
June 6th. Remember the 'bolt on and go' comment about the carbs? I wish! The first of three times I removed, cleaned, and replaced the carbs chasing an over-rich idle. I essentially spent the next two and a half months on this issue (among other stuff).
You do not have the required permissions to view the files attached to this post.
"I have no special talent. I am only passionately curious." - Albert Einstein

"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow

"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown

Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!

Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!

In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
User avatar
Track T 2411
Honored Life Member
Honored Life Member
Posts: 8791
Joined: Thu May 29, 2008 9:37 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
Location: Prairie du Sac Wisconsin

Re: The 'Humpty Dumpty' refresh.

#23

Post by Track T 2411 »

20160617_133427.jpg
June 17th. Coming together nicely! New tires, rebuilt forks, fuel tank, and replacement wiring harness installed. At this point I'd completed a couple of cooling system flushes, as well as an engine oil flush. The carbs were still kicking my butt.
You do not have the required permissions to view the files attached to this post.
"I have no special talent. I am only passionately curious." - Albert Einstein

"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow

"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown

Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!

Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!

In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
User avatar
Track T 2411
Honored Life Member
Honored Life Member
Posts: 8791
Joined: Thu May 29, 2008 9:37 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
Location: Prairie du Sac Wisconsin

Re: The 'Humpty Dumpty' refresh.

#24

Post by Track T 2411 »

Between the weather, work, and other commitments (and those dang carbs), the next couple of months didn't show much progress. Rebuilt calipers and front and rear master cylinders finally got installed, but I quickly discovered that the rear brake disk was warped enough to rub on the caliper mounting bracket. I think I installed/removed the rear tire/wheel at least 6 times during this build!
"I have no special talent. I am only passionately curious." - Albert Einstein

"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow

"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown

Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!

Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!

In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
User avatar
Track T 2411
Honored Life Member
Honored Life Member
Posts: 8791
Joined: Thu May 29, 2008 9:37 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
Location: Prairie du Sac Wisconsin

Re: The 'Humpty Dumpty' refresh.

#25

Post by Track T 2411 »

20161002_112935.jpg
October 6th. Final installation of the exhaust...
20161002_131601.jpg
Coming together. FINALLY!
20161002_172315.jpg
20161002_172345.jpg
New to me seat.
You do not have the required permissions to view the files attached to this post.
"I have no special talent. I am only passionately curious." - Albert Einstein

"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow

"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown

Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!

Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!

In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
User avatar
Track T 2411
Honored Life Member
Honored Life Member
Posts: 8791
Joined: Thu May 29, 2008 9:37 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
Location: Prairie du Sac Wisconsin

Re: The 'Humpty Dumpty' refresh.

#26

Post by Track T 2411 »

20161011_161109.jpg
20161011_161200.jpg
October 11th. Time for a real first ride!
You do not have the required permissions to view the files attached to this post.
"I have no special talent. I am only passionately curious." - Albert Einstein

"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow

"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown

Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!

Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!

In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
User avatar
Track T 2411
Honored Life Member
Honored Life Member
Posts: 8791
Joined: Thu May 29, 2008 9:37 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
Location: Prairie du Sac Wisconsin

Re: The 'Humpty Dumpty' refresh.

#27

Post by Track T 2411 »

20161020_171654.jpg
20161020_171742.jpg
Call it done!

PHEW!
You do not have the required permissions to view the files attached to this post.
"I have no special talent. I am only passionately curious." - Albert Einstein

"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow

"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown

Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!

Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!

In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
User avatar
Rat
Photo Gallery Admin
Photo Gallery Admin
Posts: 16047
Joined: Fri Oct 21, 2005 9:59 pm
My Album: https://www.ngwclub.com/gallery/v/wingmans/rat/
RIP: cookie, KyPM, Roady
Location: Toronto .... Canada

Re: The 'Humpty Dumpty' refresh.

#28

Post by Rat »

Fine work .... be careful with that 'done' word ....

Gord
"I'd rather Ride than Shine"
'13 Honda NC700sa … An old guy's bike, a bit boring … a bit shiney …
‘14 KLR650 ... gone
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
User avatar
flyin900
Platinum Member
Platinum Member
Posts: 1515
Joined: Sun Jan 10, 2010 3:50 pm
Location: Canada

Re: The 'Humpty Dumpty' refresh.

#29

Post by flyin900 »

Just reading through your posts I was smiling a little since I can really identify with those trials and tribulations you were struggling with too. Went through most of the same issues on my last build. That said you prevailed and the bike looks great and hopefully runs well for you.
Current Bikes:
DISPLAY MODELS:
1966 CL77 - Honda 305cc - Dual purpose - "Gentleman's Scrambler" was a period moniker.
1967 CL175K0 - Low production number with #802 engine serial- winter 2019/2020 full restoration.
1972 CB350F - Baby Four with low mileage - Cosmetic refresh to the next level 2021/2022.
RIDERS AND FUN TOYS:
1978 CB550K - Very original bike with only 7499 Km. from new - light cleanup and refresh done.
1983 CB1100F - Canadian model - DOHC Supersport in pristine low kilometre condition from new.
1984 CX650E - Restored summer 2017 - a rare Eurosport model - excellent one owner bike.
User avatar
Track T 2411
Honored Life Member
Honored Life Member
Posts: 8791
Joined: Thu May 29, 2008 9:37 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
Location: Prairie du Sac Wisconsin

Re: The 'Humpty Dumpty' refresh.

#30

Post by Track T 2411 »

RAT wrote:Fine work .... be careful with that 'done' word ....

Gord
Yeah, as soon as I posted it, I thought of the list of 'nice to do' stuff: cut down the windshield, paint/wrap the exhaust, rebuild and change in the original carbs...

But, it's a runner, and those little things can happen between rides, lol!
"I have no special talent. I am only passionately curious." - Albert Einstein

"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow

"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown

Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!

Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!

In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
Post Reply

Return to “Members Restorations and Projects”