Shelter Cover Hinge Pin Replacement

cross over parts from other wings, hondas, or any other parts sources that can be used on our wings.

Moderators: robin1731, Rat, Forum Moderators

Post Reply
leonardhcross
Titanium Member
Titanium Member
Posts: 373
Joined: Thu Aug 22, 2019 2:39 pm
Location: Sylvan Beach, NY

Shelter Cover Hinge Pin Replacement

#1

Post by leonardhcross »

These came in the mail today. It is necessary to grind down one side of the cap to make them fit properly. These clevis pins are 5mm x 70 mm. They came in a pkg of ten with cotter pins for $19.77 + tax.
IMG_5538.jpeg
IMG_5542.jpeg
IMG_5544.jpeg
IMG_5545.jpeg
You do not have the required permissions to view the files attached to this post.
User avatar
Rat
Photo Gallery Admin
Photo Gallery Admin
Posts: 16002
Joined: Fri Oct 21, 2005 9:59 pm
My Album: https://www.ngwclub.com/gallery/v/wingmans/rat/
RIP: cookie, KyPM, Roady
Location: Toronto .... Canada

Re: Shelter Cover Hinge Pin Replacement

#2

Post by Rat »

Good info … thanks for posting

Gord
"I'd rather Ride than Shine"
'13 Honda NC700sa … TNG
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
User avatar
NotSoLilCrippseys
Silver Member
Silver Member
Posts: 654
Joined: Sun Nov 29, 2020 8:21 am
Location: York County, Maine

Re: Shelter Cover Hinge Pin Replacement

#3

Post by NotSoLilCrippseys »

Leonard. Good find. $2 each in a kit to tackle 2.5 bikes.

And to think I've been using nails.

I should pick up one of those bags.
Avatar is a summer '21 photo of the Blue Phoenix, our 1983 GL1100I rescue gone naked.

In the Stable and Ridable
1976 GL1000 (Sulphur Yellow, original paint)
1992 ST1100 - my longer haul tourer
1987 VFR700 - son's latest, in blue/silver
1983 GL1100I - son's naked Blue Phoenix
1982 GL1100I - naked bagger Cabernet (surf bike)
1979 GL1000 - Ginger Lynn, but not that Ginger Lynn (Wing and a Prayer)
1978 CB550K - son's cafe
1986 VFR700 - fun throwback in RWB

Active and Semi-active Project(s)
1972 CB500F - recently acquired project on tap for winter '25-6
FrankenWing - 1980 GL1100 motor in 1982 or 1983 frame (still deciding, so maybe semi-active).

Sold
Not lookin' back to avoid regrets
Post Reply

Return to “Parts Reference Forum”