Hi guys, takin some time off the wings... goes to powder coat my cb500T wheels, but honda discontinued the bushing, are there equivalents? help?!
or do i give up on powder coat...
70's honda sprocket damper bushings where are they!!!
Moderators: Whiskerfish, ascot, Forum Moderators
-
mhynze
- Billet Alum. Member
- Posts: 240
- Joined: Tue Jun 30, 2015 12:48 pm
- Location: Ontario
70's honda sprocket damper bushings where are they!!!
1977 GL1000, with GL1100 engine and carbs....in progress
1984 GL1200 Ascenpade gone naked...............in progress
1976 GL1000 1200 Engine, 1200 wheels...........in progress
1983 GL1100 Stock, fully functional!
1982 GL1100 ..................................................in progress
1976 GL1000 Stock resto....................... .........in progress
1978 GL1000....Upgraded...Bad cylinder............in progress
1982 CB900, 83 GL1100 rear end, 2006 gsxr1000 front end, 1200 front wheel..... in progress
1981 CB750k Needs attention.... in progress
The more time I spend on here the farther behind I get
1984 GL1200 Ascenpade gone naked...............in progress
1976 GL1000 1200 Engine, 1200 wheels...........in progress
1983 GL1100 Stock, fully functional!
1982 GL1100 ..................................................in progress
1976 GL1000 Stock resto....................... .........in progress
1978 GL1000....Upgraded...Bad cylinder............in progress
1982 CB900, 83 GL1100 rear end, 2006 gsxr1000 front end, 1200 front wheel..... in progress
1981 CB750k Needs attention.... in progress
The more time I spend on here the farther behind I get
-
rtccp
- Titanium Member
- Posts: 343
- Joined: Tue Jun 18, 2013 4:31 pm
- RIP: 1963-2017
- Location: hamilton , ontario, canada
Re: 70's honda sprocket damper bushings where are they!!!
Hey M, I have powder coated several rims with the "cushions" still in them ,never had a problem, just mask them off and let them cool down before you use them...np
1983 GL1100 Standard
-
mhynze
- Billet Alum. Member
- Posts: 240
- Joined: Tue Jun 30, 2015 12:48 pm
- Location: Ontario
Re: 70's honda sprocket damper bushings where are they!!!
okay i definitely thought they would melt... and im doing my 81 cb 750 too with the comstars same as the goldwings except sprocket driven and the bushing are built inside of the rim so no way to remove them
I really need the slide hammer bearing puller
I really need the slide hammer bearing puller
1977 GL1000, with GL1100 engine and carbs....in progress
1984 GL1200 Ascenpade gone naked...............in progress
1976 GL1000 1200 Engine, 1200 wheels...........in progress
1983 GL1100 Stock, fully functional!
1982 GL1100 ..................................................in progress
1976 GL1000 Stock resto....................... .........in progress
1978 GL1000....Upgraded...Bad cylinder............in progress
1982 CB900, 83 GL1100 rear end, 2006 gsxr1000 front end, 1200 front wheel..... in progress
1981 CB750k Needs attention.... in progress
The more time I spend on here the farther behind I get
1984 GL1200 Ascenpade gone naked...............in progress
1976 GL1000 1200 Engine, 1200 wheels...........in progress
1983 GL1100 Stock, fully functional!
1982 GL1100 ..................................................in progress
1976 GL1000 Stock resto....................... .........in progress
1978 GL1000....Upgraded...Bad cylinder............in progress
1982 CB900, 83 GL1100 rear end, 2006 gsxr1000 front end, 1200 front wheel..... in progress
1981 CB750k Needs attention.... in progress
The more time I spend on here the farther behind I get
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 2176 Views
-
Last post by Sidecar Bob
-
- 12 Replies
- 2740 Views
-
Last post by jdvorchak
-
- 1 Replies
- 2139 Views
-
Last post by Chainman
-
- 5 Replies
- 826 Views
-
Last post by shopguy