Never Ever B4 seen photos of a Goldwing
Moderators: Brant, Sagebrush, Forum Moderators
- Patriccio
- Silver Member
- Posts: 984
- Joined: Thu Mar 07, 2013 3:57 pm
- Location: San Diego, Ca.
Never Ever B4 seen photos of a Goldwing
Ladies & gentlemen, cats & dogs, camels & dromedaries, bugs & arachnids,
For your eyes only, never before seen photos of a 1980 Goldwing Interstate. And now for a special look under the tent flap---
For your eyes only, never before seen photos of a 1980 Goldwing Interstate. And now for a special look under the tent flap---
- Attachments
-
- The condition of my condition that I just stopped in to see--
- 1980 Goldwing3.jpg (15.91 KiB) Viewed 3316 times
Last edited by Patriccio on Sun Jul 27, 2014 10:39 pm, edited 5 times in total.
If there is one thing I have learned throughout this process it is this: Check your respirator for spiders before you put it on.
- CYBORG
- Moderator
- Posts: 24552
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: Never Ever B4 seen photos of a Goldwing
Interesting treatment on the front fender
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
- Patriccio
- Silver Member
- Posts: 984
- Joined: Thu Mar 07, 2013 3:57 pm
- Location: San Diego, Ca.
Re: Never Ever B4 seen photos of a Goldwing
This post is a test. I have about 300 photos of the build. As you can see one pic is a duplicate, & I would like Mr. TNTbefree to note that some Goldwings did have a special Dish TV attachment as you can see in the photo of the PO's storage area for the bike.
Not sure if I like the front fender. I could cut more.
Not sure if I like the front fender. I could cut more.
If there is one thing I have learned throughout this process it is this: Check your respirator for spiders before you put it on.
- Patriccio
- Silver Member
- Posts: 984
- Joined: Thu Mar 07, 2013 3:57 pm
- Location: San Diego, Ca.
Re: Never Ever B4 seen photos of a Goldwing
If there is one thing I have learned throughout this process it is this: Check your respirator for spiders before you put it on.
- Patriccio
- Silver Member
- Posts: 984
- Joined: Thu Mar 07, 2013 3:57 pm
- Location: San Diego, Ca.
Re: Never Ever B4 seen photos of a Goldwing
The Las Vegas brassiere, double C, I think . . .
Last edited by Patriccio on Sat May 24, 2014 3:04 pm, edited 1 time in total.
If there is one thing I have learned throughout this process it is this: Check your respirator for spiders before you put it on.
- Patriccio
- Silver Member
- Posts: 984
- Joined: Thu Mar 07, 2013 3:57 pm
- Location: San Diego, Ca.
Re: Never Ever B4 seen photos of a Goldwing
I built the tail piece from scratch w/ a plastic honeycomb product, fiberglass & gel coat.
If there is one thing I have learned throughout this process it is this: Check your respirator for spiders before you put it on.
- Patriccio
- Silver Member
- Posts: 984
- Joined: Thu Mar 07, 2013 3:57 pm
- Location: San Diego, Ca.
Re: Never Ever B4 seen photos of a Goldwing
After sanding & priming
If there is one thing I have learned throughout this process it is this: Check your respirator for spiders before you put it on.
- Patriccio
- Silver Member
- Posts: 984
- Joined: Thu Mar 07, 2013 3:57 pm
- Location: San Diego, Ca.
Re: Never Ever B4 seen photos of a Goldwing
Tailpiece w/ light temporarily installed
If there is one thing I have learned throughout this process it is this: Check your respirator for spiders before you put it on.
- Patriccio
- Silver Member
- Posts: 984
- Joined: Thu Mar 07, 2013 3:57 pm
- Location: San Diego, Ca.
Re: Never Ever B4 seen photos of a Goldwing
I also removed those unsightly seams on the fore 'n aft of the shelter.
Fiberglass, gel coat, epoxy.
Fiberglass, gel coat, epoxy.
If there is one thing I have learned throughout this process it is this: Check your respirator for spiders before you put it on.
- Patriccio
- Silver Member
- Posts: 984
- Joined: Thu Mar 07, 2013 3:57 pm
- Location: San Diego, Ca.
Re: Never Ever B4 seen photos of a Goldwing
After sanding & priming, voila! seams are gone.
If there is one thing I have learned throughout this process it is this: Check your respirator for spiders before you put it on.
- Patriccio
- Silver Member
- Posts: 984
- Joined: Thu Mar 07, 2013 3:57 pm
- Location: San Diego, Ca.
Re: Never Ever B4 seen photos of a Goldwing
The front of the shelter
If there is one thing I have learned throughout this process it is this: Check your respirator for spiders before you put it on.
- Patriccio
- Silver Member
- Posts: 984
- Joined: Thu Mar 07, 2013 3:57 pm
- Location: San Diego, Ca.
Re: Never Ever B4 seen photos of a Goldwing
After sanding & priming
If there is one thing I have learned throughout this process it is this: Check your respirator for spiders before you put it on.
- Patriccio
- Silver Member
- Posts: 984
- Joined: Thu Mar 07, 2013 3:57 pm
- Location: San Diego, Ca.
Re: Never Ever B4 seen photos of a Goldwing
Shelter brackets primed, painted, installed
If there is one thing I have learned throughout this process it is this: Check your respirator for spiders before you put it on.
- Patriccio
- Silver Member
- Posts: 984
- Joined: Thu Mar 07, 2013 3:57 pm
- Location: San Diego, Ca.
Re: Never Ever B4 seen photos of a Goldwing
YSS shocks
If there is one thing I have learned throughout this process it is this: Check your respirator for spiders before you put it on.
- Patriccio
- Silver Member
- Posts: 984
- Joined: Thu Mar 07, 2013 3:57 pm
- Location: San Diego, Ca.
Re: Never Ever B4 seen photos of a Goldwing
Not sure if I like the upholstery yet; it may be the wrong color.
If there is one thing I have learned throughout this process it is this: Check your respirator for spiders before you put it on.
-
- Similar Topics
- Replies
- Views
- Last post