BRADSHAW BIKES POLISHING & RESTORATION CATALOG 2016

Miscellaneous GoldWing Related Parts, and GoldWing for sale.

Moderators: alan hawke, Forum Moderators

Post Reply
Easy rider
Tin Member
Tin Member
Posts: 15
Joined: Tue Apr 30, 2013 8:16 am
Location: Kentucky-USA

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

#46

Post by Easy rider »

Hello. What is the "life expectancy" of the powder coated exhaust headers? How long till the powder coat eventually begin to deteriorate? (Peel and flake off) Thanks Ed.
User avatar
sunnbobb
Facebook Admin
Facebook Admin
Posts: 21272
Joined: Thu Jan 10, 2008 4:09 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
Location: LaConner, WA

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

#47

Post by sunnbobb »

Yes, you would need a way to hold the parts, perhaps leave them attached to the engine?
I found the end of the internet

---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!

1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
User avatar
sunnbobb
Facebook Admin
Facebook Admin
Posts: 21272
Joined: Thu Jan 10, 2008 4:09 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
Location: LaConner, WA

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

#48

Post by sunnbobb »

bump bump
I found the end of the internet

---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!

1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
User avatar
robin1731
Membership Admin
Membership Admin
Posts: 21724
Joined: Mon May 29, 2006 8:31 am
Location: Decatur, Indiana

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

#49

Post by robin1731 »

Easy rider wrote:Hello. What is the "life expectancy" of the powder coated exhaust headers? How long till the powder coat eventually begin to deteriorate? (Peel and flake off) Thanks Ed.

I can only speak for my pipes. The ones on my race bike are coated inside and outside. They were done ~8 years ago. Still look new. They see a lot more heat than a street bike does. But of course they don't get quite the abuse from stones and stuff picked up on the road.
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
User avatar
sunnbobb
Facebook Admin
Facebook Admin
Posts: 21272
Joined: Thu Jan 10, 2008 4:09 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
Location: LaConner, WA

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

#50

Post by sunnbobb »

Thanks Robin, missed this post. The powder is a 1200 degree rated silicon based powder. It should last a very long time as long as no rocks or whatever hit the coating and chip it off.
I found the end of the internet

---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!

1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
User avatar
sunnbobb
Facebook Admin
Facebook Admin
Posts: 21272
Joined: Thu Jan 10, 2008 4:09 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
Location: LaConner, WA

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

#51

Post by sunnbobb »

Here is a set of 76 mufflers with high temp powder coating
Attachments
gl1000 powdered exhaust.jpg
gl1000 powdered exhaust.jpg (58.66 KiB) Viewed 4132 times
I found the end of the internet

---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!

1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
User avatar
sunnbobb
Facebook Admin
Facebook Admin
Posts: 21272
Joined: Thu Jan 10, 2008 4:09 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
Location: LaConner, WA

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20

#52

Post by sunnbobb »

Just finished another final. Our fourth this year. You guys are killin us.
Attachments
polished final drive gl1000.jpg
polished final drive gl1000.jpg (43.58 KiB) Viewed 4123 times
I found the end of the internet

---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!

1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
User avatar
sunnbobb
Facebook Admin
Facebook Admin
Posts: 21272
Joined: Thu Jan 10, 2008 4:09 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
Location: LaConner, WA

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG 2013

#53

Post by sunnbobb »

Polishing is somewhat of a black art. Prying secrets out of journeymen can be an exercise in futility. We are not sworn to any secrecy, such as a magician, nonetheless, the best techniques for polishing are actually not readily available on the web. Oh yes, you can read or watch videos with guys using this polish and that wheel, and the results are always amazing. I have discovered something however. Not all aluminum is alike. The aluminum on a V8 valve cover is much softer and easier to polish than say, a GL1000 valve covers. And something from a 1970 Triumph is harder yet. So hard, it seems like you are simply buffing the tarnish rather than the aluminum.

Anyway, here is a secret I have not told you yet. I am frequently asked how to get the black polish residue off of the part easily. When I first started, I used mineral spirits or lighter fluid, followed by a hot water bath and mild dish soap. I still had to rub some of the polish off, and the mineral spirits would leave a rainbow if not completely removed. And acetone worked great, as long as you wore a gas mask and chemical gloves. Not long after I started I found the secret. And I am surprised none of my customers have "sniffed" it out.

So here it is. Peanut Butter. Not kidding. Yup, smear some creamy peanut butter on the black residue, wait a minute and then wipe it off with a clean towel. The towel quickly turns black. Wash the entire assembly with mild soapy hot water and rinse. Done.


And a warning for folks doing this at home: Do not attempt this if you are stoned and haven't eaten that day. A peanut butter timing belt cover ain't so good for your teeth. Just sayin'.
I found the end of the internet

---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!

1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
User avatar
mcgovern61
Silver Member
Silver Member
Posts: 580
Joined: Wed Aug 27, 2008 10:03 pm
Location: Mantua, New Jersey

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG 2013

#54

Post by mcgovern61 »

sunnbobb wrote:And a warning for folks doing this at home: Do not attempt this if you are stoned and haven't eaten that day. A peanut butter timing belt cover ain't so good for your teeth. Just sayin'.
Now that is funny! lolol

Getting ready to send some GL1100 valve covers!
Gerry

Current ride: 82' GL1100
1st ride: 81' Suzuki GN400
User avatar
sunnbobb
Facebook Admin
Facebook Admin
Posts: 21272
Joined: Thu Jan 10, 2008 4:09 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
Location: LaConner, WA

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG 2013

#55

Post by sunnbobb »

A labor of love. GL1100 Polished Final finished today..
Attachments
polishing gl1100 Final.jpg
polishing gl1100 Final.jpg (60.42 KiB) Viewed 4097 times
I found the end of the internet

---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!

1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
User avatar
trail_guy2001
Cast Iron Member
Cast Iron Member
Posts: 56
Joined: Wed Apr 18, 2012 9:08 am
Location: Hanover, Pennsylvania

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG 2013

#56

Post by trail_guy2001 »

Those polished finals are such a great statement! I know not everyone agrees, but I love the bling that the polished finals adds to the bike and 'Bradshaw Bikes' is the team to help us achieve that extra something to our NGW.
1977 GL1000
User avatar
sunnbobb
Facebook Admin
Facebook Admin
Posts: 21272
Joined: Thu Jan 10, 2008 4:09 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
Location: LaConner, WA

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG 2013

#57

Post by sunnbobb »

Back to the top
I found the end of the internet

---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!

1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
User avatar
sunnbobb
Facebook Admin
Facebook Admin
Posts: 21272
Joined: Thu Jan 10, 2008 4:09 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
Location: LaConner, WA

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG 2013

#58

Post by sunnbobb »

Fall winter discount. Place your order before November 30 and get 5% off! Be sure to mention this posting.
I found the end of the internet

---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!

1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
User avatar
bob
Silver Member
Silver Member
Posts: 559
Joined: Sun Jul 18, 2010 5:28 pm
Location: Cape Cod, Mass,USA

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG 2013

#59

Post by bob »

sunnbobb wrote:A labor of love. GL1100 Polished Final finished today..
Hi Rich. I believe this is my final drive. I apologize for my lack of manners. I never contacted you to let you know how thrilled I am with the quality of the polish ! I haven't installed it yet. I plan to do it this winter after I send the rest of the polishable bits to you, to get the full effect.

I'm also considering the hydraulic clutch conversion. Any problems for an 82?

I'd also like to thank Dave Morgan from PsychoCycles for the great experience, selling me a great quality drive and then sending it to you for polish.

Anyway, thanks again for the top notch job.....

Bob
Attachments
polishing gl1100 Final.jpg
polishing gl1100 Final.jpg (49.56 KiB) Viewed 4056 times
75 GL1000, blue-green, 49K
81 GL1100 basket case
86 Aspencade, runs good, no clutch
82 Standard, rider
84 Standard, finally! Project bike, Thanks again, Dave...

I AM the man from Nantucket.....
User avatar
sunnbobb
Facebook Admin
Facebook Admin
Posts: 21272
Joined: Thu Jan 10, 2008 4:09 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
Location: LaConner, WA

Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG 2013

#60

Post by sunnbobb »

Hi Bob, thanks. No prob on the conversion, let me know and i can get a jump on the rebuild parts, thanks
Richard
I found the end of the internet

---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!

1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “For Sale”