BRADSHAW BIKES POLISHING & RESTORATION CATALOG 2016
Moderators: alan hawke, Forum Moderators
- sunnbobb
- Facebook Admin
- Posts: 21296
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
BRADSHAW BIKES POLISHING & RESTORATION CATALOG 2016
BRADSHAW BIKES POLISHING AND BIKE RESTORATION SERVICES
POLISHING SERVICE
CARB TOPS (set) $50
INTAKES (set) $40
TIMING BELT COVERS (pair) (any year) $57
GL1000 Valve covers (pair) $57
GL1100 Valve covers (pair) (Includes new painted emblems) $57
GL1200 Valve covers (pair) (Includes new painted emblems) $57
FRONT FORK LOWERS (pair) (75-82) $90
FRONT TRAC FORK LOWER (pair) (83-87) $95
OIL FILTER COVER $20
1200 FORK BRACE $25
POINTS COVER $15
FRONT WHEEL HUB $35
REAR WHEEL HUB $65
TRIPLE TREE $175
CLUTCH COVER $38
FINAL DRIVE $285
SHOCK MOUNT $15
POLISHED PARTS (WE SUPPLY THE PART)
GL1000/1100 Valve cover set $95 (except 83)
83 GL1100 Valve cover set $110 (No "made in Japan" on cover)
GL1000/1100 Timing Belt cover set $90
GL1000/1100 Intake Manifold set $85
Tach/fuel pump fitting $35
Points cover $25
Fork lowers $105
Thermostat Housing and pipe fittings $95
Water pump cover $25
Right side inspection plate $35
Oil sump cover $25
Oil filter cover $45
Clutch Cover $40
Final Drive $225
GL1000 right rear lower shock mount $25
Polished Fork Brace $165
"VYPER" handles set $85
TAROZZI FORK BRACE POLISHED $189
OTHER SERVICES
4 lbs of fasteners run through our tumbler $25 shipped
HIGH TEMP POWDER COAT HEADERS (1000 degree rated) Choice of black or silver $100
HYDRAULIC CLUTCH CONVERSION Kit $195
To order, pm or email Sunnbobb@gmail.com your part list. We will send you a paypal invoice with the amount due and the shipping address. In most cases we strive for less than 14 day turn around.
CATALOG
CARB TOPS (set) $45 INTAKES (set) $38 TIMING BELT COVERS (pair) (any year) $59 GL1000 Valve covers (pair) $50 GL1100 Valve covers (pair) (Includes new painted emblems) $55 GL1200 Valve covers (pair) (Includes new painted emblems) $55 FRONT FORK LOWERS (pair) (75-83) $75 POINTS COVER $15
FRONT WHEEL HUB $35 REAR WHEEL HUB $65 TRIPLE TREE $145 CLUTCH COVER $38 POLISHED PARTS (WE SUPPLY THE PART)
Tach/fuel pump fitting $35 Points cover $15
Fork lowers $105 Thermostat Housing and pipe fittings $95 Water pump cover $25
Right side inspection plate $35 Oil sump cover $25 Oil filter cover $35
Clutch Cover $40 Final Drive $225 (yours $185) 4 lbs of fasteners run through our tumbler $25 shipped HIGH TEMP POWDER COAT HEADERS Choice of black or silver $105 Turned Brake Disks $110 (set of 3)
Drilled $35 per rotor "VYPER" HANDLES $85 set Tarozzi polished fork brace (GL1000 - GL1100) $189 HYDRAULIC CLUTCH CONVERSION KIT $195
This is a kit for converting your cable driven clutch to a later style hydraulic clutch. Included in this kit:
1 refinished Clutch Cover w/ new Honda OEM seal painted either aluminum or black - polished add $20
1 Rebuilt Hydraulic Slave Cylinder new seals, spring etc.
1 New 48" Stainless Steel AN3 line
1 New Male to Male AN3/10mm connector
1 New Clutch Cover Gasket
1 New Custom made Stainless Steel push rod
This kit is ready to hookup to a Hydraulic Master Cylinder. Simply remove the old clutch and install this one and install the master of your choosing. You will also need a 10mm x 3AN banjo adapter with the angle of your choice, and a 10mm banjo bolt if you are using the gl1200 master cylinder. T All parts have been professionally reconditioned and rebuilt to like new specification.
GOLDWING ART PRINTS
8x10 $15
8x10 matted $20
Price includes delivery
POLISHING SERVICE
CARB TOPS (set) $50
INTAKES (set) $40
TIMING BELT COVERS (pair) (any year) $57
GL1000 Valve covers (pair) $57
GL1100 Valve covers (pair) (Includes new painted emblems) $57
GL1200 Valve covers (pair) (Includes new painted emblems) $57
FRONT FORK LOWERS (pair) (75-82) $90
FRONT TRAC FORK LOWER (pair) (83-87) $95
OIL FILTER COVER $20
1200 FORK BRACE $25
POINTS COVER $15
FRONT WHEEL HUB $35
REAR WHEEL HUB $65
TRIPLE TREE $175
CLUTCH COVER $38
FINAL DRIVE $285
SHOCK MOUNT $15
POLISHED PARTS (WE SUPPLY THE PART)
GL1000/1100 Valve cover set $95 (except 83)
83 GL1100 Valve cover set $110 (No "made in Japan" on cover)
GL1000/1100 Timing Belt cover set $90
GL1000/1100 Intake Manifold set $85
Tach/fuel pump fitting $35
Points cover $25
Fork lowers $105
Thermostat Housing and pipe fittings $95
Water pump cover $25
Right side inspection plate $35
Oil sump cover $25
Oil filter cover $45
Clutch Cover $40
Final Drive $225
GL1000 right rear lower shock mount $25
Polished Fork Brace $165
"VYPER" handles set $85
TAROZZI FORK BRACE POLISHED $189
OTHER SERVICES
4 lbs of fasteners run through our tumbler $25 shipped
HIGH TEMP POWDER COAT HEADERS (1000 degree rated) Choice of black or silver $100
HYDRAULIC CLUTCH CONVERSION Kit $195
To order, pm or email Sunnbobb@gmail.com your part list. We will send you a paypal invoice with the amount due and the shipping address. In most cases we strive for less than 14 day turn around.
CATALOG
CARB TOPS (set) $45 INTAKES (set) $38 TIMING BELT COVERS (pair) (any year) $59 GL1000 Valve covers (pair) $50 GL1100 Valve covers (pair) (Includes new painted emblems) $55 GL1200 Valve covers (pair) (Includes new painted emblems) $55 FRONT FORK LOWERS (pair) (75-83) $75 POINTS COVER $15
FRONT WHEEL HUB $35 REAR WHEEL HUB $65 TRIPLE TREE $145 CLUTCH COVER $38 POLISHED PARTS (WE SUPPLY THE PART)
Tach/fuel pump fitting $35 Points cover $15
Fork lowers $105 Thermostat Housing and pipe fittings $95 Water pump cover $25
Right side inspection plate $35 Oil sump cover $25 Oil filter cover $35
Clutch Cover $40 Final Drive $225 (yours $185) 4 lbs of fasteners run through our tumbler $25 shipped HIGH TEMP POWDER COAT HEADERS Choice of black or silver $105 Turned Brake Disks $110 (set of 3)
Drilled $35 per rotor "VYPER" HANDLES $85 set Tarozzi polished fork brace (GL1000 - GL1100) $189 HYDRAULIC CLUTCH CONVERSION KIT $195
This is a kit for converting your cable driven clutch to a later style hydraulic clutch. Included in this kit:
1 refinished Clutch Cover w/ new Honda OEM seal painted either aluminum or black - polished add $20
1 Rebuilt Hydraulic Slave Cylinder new seals, spring etc.
1 New 48" Stainless Steel AN3 line
1 New Male to Male AN3/10mm connector
1 New Clutch Cover Gasket
1 New Custom made Stainless Steel push rod
This kit is ready to hookup to a Hydraulic Master Cylinder. Simply remove the old clutch and install this one and install the master of your choosing. You will also need a 10mm x 3AN banjo adapter with the angle of your choice, and a 10mm banjo bolt if you are using the gl1200 master cylinder. T All parts have been professionally reconditioned and rebuilt to like new specification.
GOLDWING ART PRINTS
8x10 $15
8x10 matted $20
Price includes delivery
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
- gregforesi
- Honored Life Member
- Posts: 4978
- Joined: Wed Jun 10, 2009 8:42 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Greg+Foresi/
- Location: Venice, FL
Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20
I don't know about the rest of the parts, but I do know that's a good deal on a final drive.
I had an "amateur polishing moment" yesterday involving a flying carb top. As a result I'm thinking of installing a padded cell for polishing. I just gotta figure out how to hold the parts when I've got the belted white jacket on.
Inside my padded room no one will hear me crying.
I had an "amateur polishing moment" yesterday involving a flying carb top. As a result I'm thinking of installing a padded cell for polishing. I just gotta figure out how to hold the parts when I've got the belted white jacket on.
Inside my padded room no one will hear me crying.
2006 GL1800 (Brutus Maximus)
1978 GL1000 (White Trash - 2012 BOTY
(If you want to discuss the Trashmobile, Webers, Rearsets, Clubmans, or other stuff then send me a PM.)
"Getting old ain't for sissies" - Phyllis Diller
"So how much you gonna spend to win that $5 trophy?" - Cyborg
1978 GL1000 (White Trash - 2012 BOTY
(If you want to discuss the Trashmobile, Webers, Rearsets, Clubmans, or other stuff then send me a PM.)
"Getting old ain't for sissies" - Phyllis Diller
"So how much you gonna spend to win that $5 trophy?" - Cyborg
- AODRN
- Titanium Member
- Posts: 303
- Joined: Tue May 22, 2012 7:56 pm
- Location: fenton
Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20
I'm sold. Where do I send my stuff?
1979 GL1000 Gordians Knot (In progress)
2010 Ninja 250 track bike
2010 Ninja 250 track bike
- Pony Ruiz
- Platinum Member
- Posts: 1923
- Joined: Sun Oct 25, 2009 7:17 pm
- Location: Seatown - WA
Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20
Wow
nice stuff.
nice stuff.
1978GL1000 naked - kinda sadly gone. no bike at the moment.
"The greatest shortcoming of the human race is our inability to understand the exponential function." Albert A. Bartlett.
"The greatest shortcoming of the human race is our inability to understand the exponential function." Albert A. Bartlett.
- Roady
- Member Relations &_Graphics
- Posts: 11957
- Joined: Wed Jun 20, 2007 2:35 pm
- Location: Port St. John, FL
Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20
Now there's a catalog I could browse through for the entire winter.
Blingage!
Blingage!
- sunnbobb
- Facebook Admin
- Posts: 21296
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20
I thought it was about time I pulled everything into one post.
I forgot to mention ordering info. Added to the first post.
I forgot to mention ordering info. Added to the first post.
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
-
- True Blue Steel Biker
- Posts: 2322
- Joined: Wed Apr 11, 2012 10:50 am
Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20
Those parts look fantastic,
How do, for instance, the fork legs and valve covers wear?
That is polished aluminum right?
It looks like chrome. Do they slowly paternal and corrode?
Thanks dave
How do, for instance, the fork legs and valve covers wear?
That is polished aluminum right?
It looks like chrome. Do they slowly paternal and corrode?
Thanks dave
Dave
1975 GL 1000
1980 XS650
1981 ct110
1972 F7 KAW 175
2000 moby blaze 40cc
Chihuahua (Ellie)
Chihuahua #2(Blaze)
1975 GL 1000
1980 XS650
1981 ct110
1972 F7 KAW 175
2000 moby blaze 40cc
Chihuahua (Ellie)
Chihuahua #2(Blaze)
- Roady
- Member Relations &_Graphics
- Posts: 11957
- Joined: Wed Jun 20, 2007 2:35 pm
- Location: Port St. John, FL
Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20
I'm hoping you meant patina. Paternal is something my father did ...
Bradshaw did my parts and all I've had to do is rub them down every other month with aluminum polish. Still look like sterling silver.
Bradshaw did my parts and all I've had to do is rub them down every other month with aluminum polish. Still look like sterling silver.
- sunnbobb
- Facebook Admin
- Posts: 21296
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20
Nothing like a testimonial.. thanks Roady!
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
- sunnbobb
- Facebook Admin
- Posts: 21296
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20
And another happy customer! Thanks Dritzman!
After:
Before:
After:
Before:
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
- sunnbobb
- Facebook Admin
- Posts: 21296
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20
Shameless bump
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
- turboter
- Cast Iron Member
- Posts: 88
- Joined: Tue Jan 01, 2008 11:57 pm
- Location: saint paul
Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20
Sunnbobb,
Looks like great work!
Just wondering if you have ever thought of expanding,like polishing early honda cb 750 engine parts?
Looks like great work!
Just wondering if you have ever thought of expanding,like polishing early honda cb 750 engine parts?
TurboTerry
1975 Blue green Gold Wing Original owner
1975 candy anteres red Gold Wing
1974 Freedom green metallic CB 750 K-4
1986 Mustang G.T. convertible
1986 Buick Regal T-Type
1987 Buick Turbo Regal
1975 Blue green Gold Wing Original owner
1975 candy anteres red Gold Wing
1974 Freedom green metallic CB 750 K-4
1986 Mustang G.T. convertible
1986 Buick Regal T-Type
1987 Buick Turbo Regal
- sunnbobb
- Facebook Admin
- Posts: 21296
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20
turbo, I frequently do parts for other bikes, but have not, as yet, cataloged them.
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
- northwood
- Silver Member
- Posts: 902
- Joined: Fri Oct 08, 2010 2:02 pm
- Location: Mountain View, CA
Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20
After polishing, do you clearcoat the parts? To keep them looking good?
2015 Honda Grom (Soon)
2006 Honda VFR800 "Snowflake"
2007 Honda "Chicken Bacon Ranch" (CBR1000RR)
Previous Bikes:
1975 Honda "ol' Bird Dog" GL 1000 (Gone but not forgotten)
1982 Kawasaki AR80 (The one I will regret selling)
1982 Honda CM450E Not so Project "Connie"
1987 Yamaha Virago XV535
2005 Triumph Daytona 650
2006 Honda VFR800 "Snowflake"
2007 Honda "Chicken Bacon Ranch" (CBR1000RR)
Previous Bikes:
1975 Honda "ol' Bird Dog" GL 1000 (Gone but not forgotten)
1982 Kawasaki AR80 (The one I will regret selling)
1982 Honda CM450E Not so Project "Connie"
1987 Yamaha Virago XV535
2005 Triumph Daytona 650
- sunnbobb
- Facebook Admin
- Posts: 21296
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: BRADSHAW BIKES POLISHING & RESTORATION CATALOG WINTER 20
NW, we do not. There is controversy regarding the practice. I fear that clear coat would trap moisture underneath and make it hard to keep them looking nice. I have found just a wipe of metal polish once in a while will keep them looking bright. I have wanted to try a crystal clear power coat though...
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 2 Replies
- 1305 Views
-
Last post by RB
-
- 277 Replies
- 33849 Views
-
Last post by Fred Camper
-
- 286 Replies
- 35557 Views
-
Last post by CYBORG