duke182's -"worlds slowest build thread"

From basic novice to the hard core cutomizing. Sharing tips, tricks and knowledge. Feel
free to ask question or give us your "2 cents".

Moderators: sunnbobb, Neil, Forum Moderators

Post Reply

top three color schemes after 100 votes. which would you choose?

honda red with black frame
40
46%
sky blue with silver frame
18
21%
multi hued copper
29
33%
 
Total votes: 87

User avatar
duke182
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3375
Joined: Mon Jul 05, 2010 11:33 pm
My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
Location: hope,ark

duke182's -"worlds slowest build thread"

#1

Post by duke182 »

i have been on this site for a little while now and have been really enjoying the place.
there is so much to view and learn that it is hard not to.I
when i joined i figured to glean a few ideas and apply them to my bike, in addition to what i had already done.
well since then i have just about driven myself nuts deciding wether or not to continue on the already choosen path or to take the bike in an entirely new direction.
it would have been easy to alter my view entirely because there are so many great ideas on this site.
what i decided was to follow my original plan and finish the bike according to my first vision of it while incorporating those ideas found here that fit the style i wanted.
so i guess its time to twist the throttle, so to speak, and get this project back underway.

my intention is to chronicle the effort up to and past the first ride as a completed project.
there have been so many great builds here that i dont expect to make an impact, i just want to do it and see what you guys think as it happens.
i expect this to be the slowest build thread on here so i hope ya'll will be patient.
what i hope to get from you is feedback. good or bad. im sure i wont like all your comments or use all your ideas but i am looking forward to them.
i will list and revise my basic list of ideas in this first post and will try to provide plenty of pics along the way.

THE LIST:
-completely dissassemble the bike--------------------in progress
-front fender removed-------------------------------------------------------------------------------------------------------------------------done
-www tire-----------------------------------------------
-forks extended----------------------------------------extended fork tubes-------------------
-raked trees?--------------------------------------------
-stock headlight and bracket with custom grill ------------------------
-stock bars with custom risers--------------------------------------------done
-frame modified at the neck for rake and/or stretch
-customized shelter------------------------in progress
-custom seating-----------------------------------------in progress
-rear of frame modified accordingly--------------------still undecided about rear frame treatment
-custom sissy bar---------------------------------------have one, need to make it fit
-side covers customized---------------------------------------------------------------------------------------------------------------------------done
-shorter shocks-----------------------------------------maybe solid struts
-rear fender bobbed----------------------------------------------------------------------------------------------------------------------------done
- stock rear wheel with solid discs added-------------have discs, need to modify
-www rear tire---have tire needs to be mounted
-custom taillight----------------------------------------in progress
-custom radiator grill----------------------------------in progress
-radiator and fan detailed-----------------------------in progress
-belt covers removed???------------------------------thinking about custom made covers
-alternator conversion---------------------------------contemplating a poorboy conversion---leaning more towards jake2012's example
-custom wiring harness--------------------------------skematic is done, now the fun part
-gel battery---------------------------------------------have one located, just have to get it bought
-k&n air filter-------------------------------------------have one located, just have to get it bought
-new belts----------------------------------------------have one located, just have to get it bought
-carbs rebuilt(possible single carb conversion)
---refinished
---stainless hardware
---tuned
-engine cleaned and detailed
---new belts
---new gaskets
---water pump inspected
---head work as necessary
---valves adjusted
---stator removed/replaced???-----------------------------must study this some more
---custom cover if stator removed???-----------this too
---stainless hardware kit
---paint and polish as necessary
-custom pegs including passenger and highway
-custom jiffy stand--------------------in progress
-center stand removed-------------------------------------------------------------------------------------------------------------------------done
stock exhaust removed------------------------------------------------------------------------------------------------------------------------done
- custom exhaust installed-----------------------------some pieces on hand, some parts located
-gas tank removed-------------------------------------going to modify the stock tank to allow a seat to set lower
-custom gas tank?--------------------------------------
-color????-----------------------------------------------to be decided by poll------------------------very close voting so far
-maintainance and performance mods as needed or desired
-hopefully a lot of detail work that will make the project fun and draw a little attention from those in the know when its finished.
-present finished bike

any way that pretty much sums up the wish list.
you dont have to wish me luck but i would like to know what you think about it.

i have also included a poll about the color. please tell me what you think would be a good choice of color(s)
Last edited by duke182 on Tue Jun 09, 2015 11:04 pm, edited 21 times in total.
God bless those who protect our freedom, at every level

Knees in the breeze makes miles of smiles

"Strive for progress, not perfection"-a wise man

1984 1200 standard
Image
click pic to see my gallery

vote in my poll
User avatar
duke182
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3375
Joined: Mon Jul 05, 2010 11:33 pm
My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
Location: hope,ark

Re: duke182's project oldwing gets back under way

#2

Post by duke182 »

just thought i would show you who to blame for hacking up an 84 standard model
Attachments
duke182
duke182
Photo0253.jpg (166.12 KiB) Viewed 3695 times
God bless those who protect our freedom, at every level

Knees in the breeze makes miles of smiles

"Strive for progress, not perfection"-a wise man

1984 1200 standard
Image
click pic to see my gallery

vote in my poll
User avatar
duke182
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3375
Joined: Mon Jul 05, 2010 11:33 pm
My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
Location: hope,ark

Re: duke182's project oldwing gets back under way

#3

Post by duke182 »

this is what i have after stripping off lots of stock and broken parts. i didnt have the forthought to take a picture right after i brought it home. i guess i was having to much fun riding the ugly beast.
at this point i have removed the front fender, broken wind shield, crash bars, busted fog lights, blinkers, tail lights, mufflers, center stand, shelter lock and broken ignition switch as well as the shelter , seat, side covers and saddle bags which included extra lights and crash bars for the rear.
Attachments
oldwing.jpg
oldwing.jpg (10.99 KiB) Viewed 3707 times
God bless those who protect our freedom, at every level

Knees in the breeze makes miles of smiles

"Strive for progress, not perfection"-a wise man

1984 1200 standard
Image
click pic to see my gallery

vote in my poll
User avatar
Roady
Member Relations &_Graphics
Member Relations &_Graphics
Posts: 11957
Joined: Wed Jun 20, 2007 2:35 pm
Location: Port St. John, FL

Re: duke182's project oldwing gets back under way

#4

Post by Roady »

I vote that you should paint it your favorite color or match the original color.

And, of course, we will need lots of :popcorn: pics of the bike and the progress.
User avatar
duke182
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3375
Joined: Mon Jul 05, 2010 11:33 pm
My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
Location: hope,ark

Re: duke182's project oldwing gets back under way

#5

Post by duke182 »

some of the parts on their way to the great scrap heap out back.
more pics later!
Attachments
the stock seat is out of the running
the stock seat is out of the running
Photo0164.jpg (50.01 KiB) Viewed 3702 times
the old bags gotta go
the old bags gotta go
Photo0176.jpg (149.49 KiB) Viewed 3684 times
bad lock and switch
bad lock and switch
lock.jpg (82.65 KiB) Viewed 3702 times
God bless those who protect our freedom, at every level

Knees in the breeze makes miles of smiles

"Strive for progress, not perfection"-a wise man

1984 1200 standard
Image
click pic to see my gallery

vote in my poll
User avatar
duke182
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3375
Joined: Mon Jul 05, 2010 11:33 pm
My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
Location: hope,ark

Re: duke182's project oldwing gets back under way

#6

Post by duke182 »

well roady,
those listed in the poll are some of my favorite colors and combinations of colors.
so what i figure is this: since paint will be some time in the future, i would let the poll run, and when it is time for paint i would take the number one vote getter or my favorite 'other' opinion and use the opinion of the board to help me make the final decession for this project.
and i hope to meet your expectations of pics and info.
i just hope i dont lose your interest when things get slo. my budget is never constant so progress will most likely come in bursts when time and money is available.
right now im excited as possible about this build. sure hope i can keep it high until completion.
duke182
God bless those who protect our freedom, at every level

Knees in the breeze makes miles of smiles

"Strive for progress, not perfection"-a wise man

1984 1200 standard
Image
click pic to see my gallery

vote in my poll
User avatar
duke182
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3375
Joined: Mon Jul 05, 2010 11:33 pm
My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
Location: hope,ark

Re: duke182's project oldwing gets back under way

#7

Post by duke182 »

in this picture the shelter has been primed and the lock hole filled. the rear fender has also been bobbed filled and primed.
the rear schock has also bee laid at a different angle to see how it would affect ride height.
the bars are also taller than stock due to 6" dogbone style risers.
Attachments
a little mock up work
a little mock up work
old2.jpg (15.07 KiB) Viewed 3698 times
God bless those who protect our freedom, at every level

Knees in the breeze makes miles of smiles

"Strive for progress, not perfection"-a wise man

1984 1200 standard
Image
click pic to see my gallery

vote in my poll
User avatar
duke182
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3375
Joined: Mon Jul 05, 2010 11:33 pm
My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
Location: hope,ark

Re: duke182's project oldwing gets back under way

#8

Post by duke182 »

here is the switch i intend to use. it has a start feature built in so i will be able to eliminate the start button from the bars.
also are a few supplies i purchased for use on the project.
Attachments
tractor switch
tractor switch
switch.jpg (141.57 KiB) Viewed 3675 times
supplies
supplies
supplies.jpg (127.79 KiB) Viewed 3693 times
God bless those who protect our freedom, at every level

Knees in the breeze makes miles of smiles

"Strive for progress, not perfection"-a wise man

1984 1200 standard
Image
click pic to see my gallery

vote in my poll
User avatar
Hoosier Daddy
True Blue Steel Biker
True Blue Steel Biker
Posts: 2910
Joined: Thu May 21, 2009 9:12 pm
Location: N.E. Indiana (Kendallville)

Re: duke182's project oldwing gets back under way

#9

Post by Hoosier Daddy »

Peaked my interest! those are some awesome plans, I think with a list of modifications like that the wilder the paint scheme the better, bright color with bass boat sized flake. But lets see how she pans out before I click a button. Sometimes the build itself decides the color. Regaurdless of how long it takes I will now get notified of updates, so keep em comin. ;)
Bulldoged '81 GL1100 "BOMBER!" BUILD THREAD
Bratstyle '80 GS750L "OVERKILL"
Cafe'd '81 CB750C "ROCK-IT"
Basket Case '72 CB450 K5 "NO CLASS"
Resto-Mod '67 BSA Spitfire "STAY CLEAN"

rainstromrider say's I'm "addicted to the build"... I think he might onto something :)
User avatar
Neil
Moderator
Moderator
Posts: 5667
Joined: Tue Sep 09, 2008 3:34 pm
Location: Davenport, Florida

Re: duke182's project oldwing gets back under way

#10

Post by Neil »

Nice project ... will be watching this one :popcorn:
User avatar
FirstYearDeek
True Blue Steel Biker
True Blue Steel Biker
Posts: 2543
Joined: Sun Aug 10, 2008 4:41 pm
Location: Terre Haute, Indiana

Re: duke182's project oldwing gets back under way

#11

Post by FirstYearDeek »

I love the idea of a red/silver bike (I just remembered Doug's Cyborg!) but that fits a more sport bike feel... ditch the red, keep the silver frame and the sky blue would look sick!

-Deek
"Eat, drink and be merry. For tomorrow we die."

1975 GL 1000 (First Year) under the knife; soon to be a cafe' inspired "Boss" of a freedom machine.
User avatar
duke182
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3375
Joined: Mon Jul 05, 2010 11:33 pm
My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
Location: hope,ark

Re: duke182's project oldwing gets back under way

#12

Post by duke182 »

some more parts and pieces that most likely wont be used
Attachments
unnecessary weight
unnecessary weight
unnecessary.jpg (229.88 KiB) Viewed 3652 times
stock light and bracket
stock light and bracket
light.jpg (132.04 KiB) Viewed 3652 times
emblem
emblem
emblem.jpg (74.89 KiB) Viewed 3670 times
God bless those who protect our freedom, at every level

Knees in the breeze makes miles of smiles

"Strive for progress, not perfection"-a wise man

1984 1200 standard
Image
click pic to see my gallery

vote in my poll
User avatar
duke182
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3375
Joined: Mon Jul 05, 2010 11:33 pm
My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
Location: hope,ark

Re: duke182's project oldwing gets back under way

#13

Post by duke182 »

and some more
Attachments
the oldwing emblem might get used somewhere
the oldwing emblem might get used somewhere
emblems.jpg (151.4 KiB) Viewed 3651 times
front fender scraps. i bobbed it but probably wont use it.
front fender scraps. i bobbed it but probably wont use it.
fender scraps.jpg (146.02 KiB) Viewed 3651 times
these had to go. way to quite
these had to go. way to quite
stockpipes2.jpg (183.91 KiB) Viewed 3397 times
Last edited by duke182 on Wed Apr 20, 2011 9:30 pm, edited 1 time in total.
God bless those who protect our freedom, at every level

Knees in the breeze makes miles of smiles

"Strive for progress, not perfection"-a wise man

1984 1200 standard
Image
click pic to see my gallery

vote in my poll
User avatar
duke182
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3375
Joined: Mon Jul 05, 2010 11:33 pm
My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
Location: hope,ark

Re: duke182's project oldwing gets back under way

#14

Post by duke182 »

a few parts with uncertain futures.
-the side covers look good but im not sure they will fit the look im going for
-the exhaust tip worked and sounded great but i think i want a longer pipe for the next incarnation
-not sure the glove box will fit after other mods i want to do
Attachments
smoothed and primed
smoothed and primed
covers.jpg (126.37 KiB) Viewed 3648 times
simple tip and adaptor
simple tip and adaptor
ex tip.jpg (80.18 KiB) Viewed 3648 times
glovebox
glovebox
glovebox.jpg (110.87 KiB) Viewed 3666 times
God bless those who protect our freedom, at every level

Knees in the breeze makes miles of smiles

"Strive for progress, not perfection"-a wise man

1984 1200 standard
Image
click pic to see my gallery

vote in my poll
User avatar
duke182
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3375
Joined: Mon Jul 05, 2010 11:33 pm
My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
Location: hope,ark

Re: duke182's project oldwing gets back under way

#15

Post by duke182 »

more parts with uncertainty.
- i want to put the speedo in a custom dash but im not sure the tach will be incorporated
-the trailer fender was considered to build a street sweeper style fender. dont think its gonna happen on this bike
Attachments
tach n speedo
tach n speedo
tach n speedo.jpg (159.66 KiB) Viewed 3646 times
early thought on rear fender
early thought on rear fender
r fender.jpg (142.03 KiB) Viewed 3664 times
God bless those who protect our freedom, at every level

Knees in the breeze makes miles of smiles

"Strive for progress, not perfection"-a wise man

1984 1200 standard
Image
click pic to see my gallery

vote in my poll
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “GoldWing UnderGround CustomiZing”