83 Interstate
Moderators: Oldewing, CYBORG, robin1731, Forum Moderators
-
raydog47
- Rusty Probie
- Posts: 2
- Joined: Tue Apr 19, 2005 11:49 am
- Location: East Tennessee
83 Interstate
I have a 83 Interstate I'm thinking of taking the fairing off of. What type of head light assembly do I need to use? And what type of driving lights assembly do I need to use. I want the type that fit beside the headlight assembly with the signal ligts attached. Also what brand of wing shield do I need? All help will be greatly appreciated.
-
Bandanna
- Platinum Member
- Posts: 1594
- Joined: Sun Jan 16, 2005 5:34 pm
- Location: n.e. england u.k.
-
Zryder
- True Blue Steel Biker
- Posts: 2954
- Joined: Tue Dec 14, 2004 2:12 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/zryder/
This is my photo album raydog47 ; http://www.ngwclub.com/gallery/zryder , but to start with I took the stock head light brackets off my GL . made a bracket that mounted on behind the brake line junction on the forks . But some do , you may still have the stock headlight brackets on under the fairing , check that and we'll go from there . The old GL I had had the stock headlight bracket on al I did was get a headlight pot and bolted that on . But as you will see I took everything off that was stock from the triple tree and added aftermarket parts , fork mount signals the bullet shaped along with the new bullet shape headlight pot that even has a blue high beam indicator light . Check out my album and get back to me if you will an any questions . Later Bud .
Zryder crosso
Zryder crosso
