How to remove rust with electrolysis
Moderators: Whiskerfish, Forum Moderators
-
the chef
- Platinum Member
- Posts: 1911
- Joined: Fri Feb 24, 2006 9:06 pm
- Location: Odenville,Alabama. The land of dixie! (!Hell yeah!!)
????
And I thought electrolysis was just good for removing the hair from my wife' s back and buttocks!!!!
On the highway to Hell!
Ride on, Ride on.. !
PREVIOUS OLD LOVES=
19?? Zundapp with 6 hp Briggs and Stratton engine Chrome tank
1971 Kawasaki H1 500 blue /white stripe
1975 Honda 750 Yellow
1980 Honda Gl 1100 Interstate Black
1982 Honda Gl 1100 Standard Black
1983 Honda Gl 1100 Aspencade Black
1981 Honda Interstate Black
1981 Honda Gl 500 Silverwing . Candy muse red
1986 Honda VT 500C red
PRESENT RIDE >1976 Honda Gl 1000 Originally red, now flat black, olive drab, primer gray.
Ride on, Ride on.. !
PREVIOUS OLD LOVES=
19?? Zundapp with 6 hp Briggs and Stratton engine Chrome tank
1971 Kawasaki H1 500 blue /white stripe
1975 Honda 750 Yellow
1980 Honda Gl 1100 Interstate Black
1982 Honda Gl 1100 Standard Black
1983 Honda Gl 1100 Aspencade Black
1981 Honda Interstate Black
1981 Honda Gl 500 Silverwing . Candy muse red
1986 Honda VT 500C red
PRESENT RIDE >1976 Honda Gl 1000 Originally red, now flat black, olive drab, primer gray.
-
kurtl42799
- Brass Member
- Posts: 21
- Joined: Mon Dec 07, 2009 1:19 am
- Location: denver, colorado
Baking Soda works
perhaps not as well as laundry soda but well enough.
Also, for those that don't want to use a battery charger, try a DC power supply. I happen to have dozens of these hanging around from various computer peripherals over the years. Tip: pick a unit with relatively low amperage (no more than 1 or two amps). The one I used was only rated at 600 ma and worked just fine.
Also, for those that don't want to use a battery charger, try a DC power supply. I happen to have dozens of these hanging around from various computer peripherals over the years. Tip: pick a unit with relatively low amperage (no more than 1 or two amps). The one I used was only rated at 600 ma and worked just fine.
kurt