rcmatt007 wrote:far better it be stuck on, then not turn on. However, I sure don't like the current draw
5speed wrote:I replaced my factory switch with one similar but didn't wire in a relay..
When I attempted to test it by letting the bike idle the fan never came on..but the bike temp gauge never got anywhere close to running hot..
Should I add a relay do you think..just to be safe?
ericheath wrote:I think it's in the shoptalk under crossover parts. I'll look and add if I find it. Here : FAN SWITCH
roady did the research for this, i didnt see it here in this list so here is the link to his post. octane posted the interchange list and it will fit a bunch of gl's.
http://www.ngwclub.com/forum/viewtopic. ... 3965#63965
here is the link to rock auto
click on part number search
here is the part number
Beck Arnley Rad Fan Switch 201-0817
AIRTEX / WELLS Ref info: Cooling Fan Switch PN: 1S4485
Beck/Arnley Rad Fan Switch 201-1614
ECHLIN : FS154
AC DELCO : A1854
STANDARD : TS306
4 SEASONS : 36567
WELLS : SW1888
NAPA (Echlin) FS131 or FS131SB
NAPA (Echlin) TS6045 or TS6045SB
tlbranth wrote:Anyone tried this'n?
https://www.ebay.com/itm/Thermo-Radiato ... .l4275.c10
Users browsing this forum: No registered users and 1 guest