Video: how to pull the pressed in Idle jet from a GL1100.

Post your "How To", or share tips and tricks about maintenance related to four cylinder Wings. Only registered users can read this forum.

Moderators: Whiskerfish, Forum Moderators

Post Reply
User avatar
sunnbobb
Facebook Admin
Facebook Admin
Posts: 21172
Joined: Thu Jan 10, 2008 4:09 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
Location: LaConner, WA

Video: how to pull the pressed in Idle jet from a GL1100.

#1

Post by sunnbobb »

Posted by Evo A. Vulpes over on the facebook page.
You do not have the required permissions to view the files attached to this post.
I found the end of the internet

---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!

1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
User avatar
Roady
Member Relations &_Graphics
Member Relations &_Graphics
Posts: 11951
Joined: Wed Jun 20, 2007 2:35 pm
Location: Port St. John, FL

Re: Video: how to pull the pressed in Idle jet from a GL1100

#2

Post by Roady »

Very slick.

I'm in ... next time the carbs come out.

And this is now linked in my tutorial.
Post Reply

Return to “How To 4-Wings (Tutorials Only)”