TO30 this was after the Ford Ferguson Spat, it had a ‘Standard Triumph’ engine instead of the Ford. Otherwise same as an 8n. Awesome Tractor. You can still buy basically the same thing... MF2600 series...Whiskerfish wrote:8N??Steven UK wrote:SNIP Gray one was on my farm in KS, SNIP
.
Did somebody say...."Tractors"??
Moderators: robin1731, Oldewing, CYBORG, Forum Moderators
-
Steven UK
- Chrome Member
- Posts: 124
- Joined: Sat Apr 18, 2020 11:22 am
- Location: Jackson MN
Re: Did somebody say...."Tractors"??
GL1100 1981 (A bike that is determined not to be ridden...!)
-
MikeNTexas
- Cast Iron Member
- Posts: 62
- Joined: Tue Dec 08, 2020 2:23 pm
- Location: Slaton Tx (just o/s Lubbock)
Re: Did somebody say...."Tractors"??
Here’s my Irrational Harvester. 1975 IH Cub Cadet Hydrostatic Drive powered by a 283 Chevy. I had way too much time on my hands one winter. Had an old rusty cub cadet setting around in the way and a 283 sitting in the corner and too many beers in the shop fridge.
You do not have the required permissions to view the files attached to this post.
-
fitscott
- Cast Iron Member
- Posts: 62
- Joined: Thu Jul 09, 2020 8:32 am
- Location: Comfort TX
Re: Did somebody say...."Tractors"??
I bet it doesn't take long to shred your fields!?!?!?
-
Whiskerfish
- President
- Posts: 34205
- Joined: Thu Feb 16, 2006 9:34 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
- Location: Norfolk Va
Re: Did somebody say...."Tractors"??
That will do it every time!!
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!
Psst. oh and by the way CHANGE YOUR BELTS!!!!
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!
Psst. oh and by the way CHANGE YOUR BELTS!!!!
-
Track T 2411
- Honored Life Member
- Posts: 8046
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: Did somebody say...."Tractors"??
That looks like a LOT of fun!
Hmmm. Maybe that's my problem... lack of a fridge (and beer) lol!
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
-
sparkyrasmus
- Titanium Member
- Posts: 351
- Joined: Sun Jun 08, 2008 7:52 am
- Location: Marshall, MN, USA
Re: Did somebody say...."Tractors"??
Have you put it on a dyna? Regardless, I doubt that OSHA would approve without a ROPS 
Keep it running
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - project for this winter? - custom "Busted"
1981 XV750H - just for fun - needs a head replaced
1983 GL1100 Standard- being resurrected
1998 V11 EV Moto Guzzi - 65th birthday present
Awesome ride
1978 GL1000 - almost stock - needs a head replaced, parts are ready to install!
1979 GL1000 - project for this winter? - custom "Busted"
1981 XV750H - just for fun - needs a head replaced
1983 GL1100 Standard- being resurrected
1998 V11 EV Moto Guzzi - 65th birthday present
Awesome ride
-
Rat
- Photo Gallery Admin
- Posts: 14186
- Joined: Fri Oct 21, 2005 9:59 pm
- My Album: https://www.ngwclub.com/gallery/v/wingmans/rat/
- RIP: cookie
- Location: Toronto .... Canada
Re: Did somebody say...."Tractors"??
"and too many beers in the shop fridge." 
Never heard of such a thing ... never even considered the possibility !!
Gord(shaken to my core)Jones
Oh ... nice tractor tho'
Never heard of such a thing ... never even considered the possibility !!
Gord(shaken to my core)Jones
Oh ... nice tractor tho'
"I'd rather Ride than Shine"
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
‘76 project .... R2B3 ....
Team 898, Team LTD 993 ....
My Original 'RAT' was an '82 CB900/1100F
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
‘76 project .... R2B3 ....
Team 898, Team LTD 993 ....
My Original 'RAT' was an '82 CB900/1100F
-
gltriker
- SUPER BIKER!!!!
- Posts: 3689
- Joined: Fri Sep 24, 2010 9:11 pm
- Location: Baldwinsville, NY
Re: Did somebody say...."Tractors"??
Did you retain the stock hydrostatic transmission and rear axle assembly?MikeNTexas wrote: ↑Thu Jan 07, 2021 10:28 pm Here’s my Irrational Harvester. 1975 IH Cub Cadet Hydrostatic Drive powered by a 283 Chevy.
Cliff
Keep your eyes and ears open and you'll learn something new, everyday.
New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi
"Can't see the paint when your looking thru the handlebars..........." -Oldewing
"I'd rather Ride than Shine" -RAT Me Too!!
Cliff
'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM https://nakedgoldwingsclub.com/forum/page/Welcome
previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
Keep your eyes and ears open and you'll learn something new, everyday.
New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi
"Can't see the paint when your looking thru the handlebars..........." -Oldewing
"I'd rather Ride than Shine" -RAT
Me Too!!Cliff
'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM
https://nakedgoldwingsclub.com/forum/page/Welcome previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
-
MikeNTexas
- Cast Iron Member
- Posts: 62
- Joined: Tue Dec 08, 2020 2:23 pm
- Location: Slaton Tx (just o/s Lubbock)
Re: Did somebody say...."Tractors"??
Yes I did. If you’ll notice I had to install the engine back asswards to get the rotation correct for the hydrastatic drive.gltriker wrote: ↑Sat Jan 09, 2021 11:04 pmDid you retain the stock hydrostatic transmission and rear axle assembly?MikeNTexas wrote: ↑Thu Jan 07, 2021 10:28 pm Here’s my Irrational Harvester. 1975 IH Cub Cadet Hydrostatic Drive powered by a 283 Chevy.