JENVEY TF 40mm Twin Throttle Bodies "Alberta Super Clipper"

This is where discussions of EFI systems, Dual Carbs, Single Carb mods and plans can be discussed and shared.

If you are working on or have a problem with stock carbs then your questions do not belong here, please post them in the Goldwing Tech Discussions Forum.

Moderators: sunnbobb, Neil, Forum Moderators

Post Reply
User avatar
gregforesi
Honored Life Member
Honored Life Member
Posts: 4965
Joined: Wed Jun 10, 2009 8:42 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Greg+Foresi/
Location: Venice, FL

Re: JENVEY TF 40mm Twin Throttle Bodies "Alberta Super Clipper"

#271

Post by gregforesi »

The tail section slides off the rack and the tackle box slides on. Got my Red Wings on there. You can see the nitrous tank on this side. All in all I have to rate it as a real POS. I suppose I knew that going in, but I wasn't expecting the horrible quality on everything that came with the kit. I picked up a 3d printer and there are over 50 printed pieces on there.
DBike 3.JPG
DBike 3.JPG (118.4 KiB) Viewed 502 times
2006 GL1800 (Brutus Maximus)
1978 GL1000 (White Trash - 2012 BOTY
(If you want to discuss the Trashmobile, Webers, Rearsets, Clubmans, or other stuff then send me a PM.)
"Getting old ain't for sissies" - Phyllis Diller
"So how much you gonna spend to win that $5 trophy?" - Cyborg
User avatar
Rat
Photo Gallery Admin
Photo Gallery Admin
Posts: 15456
Joined: Fri Oct 21, 2005 9:59 pm
My Album: https://www.ngwclub.com/gallery/v/wingmans/rat/
RIP: cookie
Location: Toronto .... Canada

Re: JENVEY TF 40mm Twin Throttle Bodies "Alberta Super Clipper"

#272

Post by Rat »

At least it’s not pink ....

Gord anim-cheers1
"I'd rather Ride than Shine"
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
User avatar
gregforesi
Honored Life Member
Honored Life Member
Posts: 4965
Joined: Wed Jun 10, 2009 8:42 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Greg+Foresi/
Location: Venice, FL

Re: JENVEY TF 40mm Twin Throttle Bodies "Alberta Super Clipper"

#273

Post by gregforesi »

Bite me Gord. It was Frosty Berry.
2006 GL1800 (Brutus Maximus)
1978 GL1000 (White Trash - 2012 BOTY
(If you want to discuss the Trashmobile, Webers, Rearsets, Clubmans, or other stuff then send me a PM.)
"Getting old ain't for sissies" - Phyllis Diller
"So how much you gonna spend to win that $5 trophy?" - Cyborg
User avatar
Rat
Photo Gallery Admin
Photo Gallery Admin
Posts: 15456
Joined: Fri Oct 21, 2005 9:59 pm
My Album: https://www.ngwclub.com/gallery/v/wingmans/rat/
RIP: cookie
Location: Toronto .... Canada

Re: JENVEY TF 40mm Twin Throttle Bodies "Alberta Super Clipper"

#274

Post by Rat »

I stand corrected .... back to our regular programming ....

Gord anim-cheers1
"I'd rather Ride than Shine"
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
User avatar
5speed
Honored Life Member
Honored Life Member
Posts: 5311
Joined: Sat Jul 11, 2015 2:37 pm
Location: Nova Scotia Canada

Re: JENVEY TF 40mm Twin Throttle Bodies "Alberta Super Clipper"

#275

Post by 5speed »

gregforesi wrote:Bite me Gord. It was Frosty Berry.
:lol:
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)

2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
User avatar
5speed
Honored Life Member
Honored Life Member
Posts: 5311
Joined: Sat Jul 11, 2015 2:37 pm
Location: Nova Scotia Canada

Re: JENVEY TF 40mm Twin Throttle Bodies "Alberta Super Clipper"

#276

Post by 5speed »

Casper wrote:Well........

Casper the OP is indeed still alive but the old ASC project is of course no longer so. However, I still do have all the parts to make it live once again! I know that I am very remote, and given the current C-19 stuff even more so for my US based friends. But it is all for FREE for the first taker. No shipping, but you gotta come by my Calgary shop with a good sized truck/van/trailer and 2 bikes and a bunch of stuff is yours. I would really love to see this project get done.

Sorry for the long-long-long absence folks, but lots of other stuff going on in my life in the last few years, mostly good.

The bikes and parts are not going anywhere, if anyone has an interest, even long term let me know with a PM.

Cheers to all.
If you decide to part them out I would be very interested in the turn down exhaust on your 76. :-D
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)

2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Unique Carburetion”