ALMOST THERE 76 LTD

A forum for stories, pics and updates of your resto's. Be it a barn find, Grampas hand me down or a bike being brought back to it's former glory.If you are restoring it, show us your stuff!

Moderators: Brant, Sagebrush, Forum Moderators

Post Reply
User avatar
rcmatt007
Treasurer
Treasurer
Posts: 31305
Joined: Fri Oct 21, 2005 12:48 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/rcmatt007/
Location: New River Valley, Virginia

Re: back to work on the 76 ltd

#16

Post by rcmatt007 »

my other 76 engine (I thought I had two, but have two 77's and two 78/9's and a 78 block)

obviously in an accident: you can see the bock side of the mounting machine screw in the third picture
DSC_0436.JPG
DSC_0436.JPG (159.77 KiB) Viewed 1120 times
DSC_0438.JPG
DSC_0438.JPG (188.55 KiB) Viewed 1120 times
DSC_0439.JPG
DSC_0439.JPG (173.4 KiB) Viewed 1120 times
-Rodger-
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, BOTM June 2015 de-evolving this very moment viewtopic.php?f=30&t=65511
76 Ltd "cookies bike" ALMOST DONE
79 project, finished, FOR SALE
'86 1200 (Beth's)(FOR SALE) with motorvation sidecar (sidecar sold) , July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's) (FOR SALE). I guess you can say we have MBS
User avatar
rcmatt007
Treasurer
Treasurer
Posts: 31305
Joined: Fri Oct 21, 2005 12:48 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/rcmatt007/
Location: New River Valley, Virginia

Re: back to work on the 76 ltd

#17

Post by rcmatt007 »

have two stubborn bolts so I am doing the propane heat and pb blaster treatment. If I have to split the case, I am assuming I will need to remove the heads?
-Rodger-
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, BOTM June 2015 de-evolving this very moment viewtopic.php?f=30&t=65511
76 Ltd "cookies bike" ALMOST DONE
79 project, finished, FOR SALE
'86 1200 (Beth's)(FOR SALE) with motorvation sidecar (sidecar sold) , July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's) (FOR SALE). I guess you can say we have MBS
User avatar
Fred Camper
Vice President
Vice President
Posts: 6890
Joined: Wed Aug 12, 2009 9:38 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Jeff+Bozeman/
Location: Metro Detroit
Contact:

Re: back to work on the 76 ltd

#18

Post by Fred Camper »

Or perhaps dropped really hard, but by definition a drop is also an accident so nevermind. BADDOG has a tig repaired engine mount as it also suffered a similar fate in its first life. Most like easier to repair than any internal damage.
Proud member of the NGW Cartel (Rochester MI)
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'

You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
User avatar
rcmatt007
Treasurer
Treasurer
Posts: 31305
Joined: Fri Oct 21, 2005 12:48 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/rcmatt007/
Location: New River Valley, Virginia

Re: back to work on the 76 ltd

#19

Post by rcmatt007 »

well, I am still hopefull I can get the OEM engine up and working right.... sitting on the stand, I did turn the crank and it shifted through all the gears and the external shift mechanism works fine.
-Rodger-
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, BOTM June 2015 de-evolving this very moment viewtopic.php?f=30&t=65511
76 Ltd "cookies bike" ALMOST DONE
79 project, finished, FOR SALE
'86 1200 (Beth's)(FOR SALE) with motorvation sidecar (sidecar sold) , July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's) (FOR SALE). I guess you can say we have MBS
User avatar
rcmatt007
Treasurer
Treasurer
Posts: 31305
Joined: Fri Oct 21, 2005 12:48 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/rcmatt007/
Location: New River Valley, Virginia

Re: back to work on the 76 ltd

#20

Post by rcmatt007 »

DSC_0440.JPG
DSC_0440.JPG (194.35 KiB) Viewed 1093 times
back is off and nothing is loose.... I had the main shaft come off with it and looked inside and the gear had moved over.... OMG I thought, but when you put the shaft back in it works like it supposed to. I can feel the primary chain and it does not appear overly loose....
-Rodger-
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, BOTM June 2015 de-evolving this very moment viewtopic.php?f=30&t=65511
76 Ltd "cookies bike" ALMOST DONE
79 project, finished, FOR SALE
'86 1200 (Beth's)(FOR SALE) with motorvation sidecar (sidecar sold) , July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's) (FOR SALE). I guess you can say we have MBS
User avatar
Whiskerfish
President
President
Posts: 36852
Joined: Thu Feb 16, 2006 9:34 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
Location: Norfolk Va

Re: back to work on the 76 ltd

#21

Post by Whiskerfish »

Yea that output shaft is a bit scary the first time you see it loose! That little access cover is there to help when you put it back together.
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!

Psst. oh and by the way CHANGE YOUR BELTS!!!!
User avatar
rcmatt007
Treasurer
Treasurer
Posts: 31305
Joined: Fri Oct 21, 2005 12:48 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/rcmatt007/
Location: New River Valley, Virginia

Re: back to work on the 76 ltd

#22

Post by rcmatt007 »

I am assuming I will need to remove the heads to split the case.... I am not looking forward to that
-Rodger-
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, BOTM June 2015 de-evolving this very moment viewtopic.php?f=30&t=65511
76 Ltd "cookies bike" ALMOST DONE
79 project, finished, FOR SALE
'86 1200 (Beth's)(FOR SALE) with motorvation sidecar (sidecar sold) , July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's) (FOR SALE). I guess you can say we have MBS
User avatar
Whiskerfish
President
President
Posts: 36852
Joined: Thu Feb 16, 2006 9:34 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
Location: Norfolk Va

Re: back to work on the 76 ltd

#23

Post by Whiskerfish »

Just the one side. Left IIRC. There are some good sized case bolts in there. Make sure you keep good track of where all the little bolts go. Seems like there are about 47 different lengths. Also I like to take pics of the gear shift stuff under the front cover. For some reason that thing mystifies me.
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!

Psst. oh and by the way CHANGE YOUR BELTS!!!!
User avatar
rcmatt007
Treasurer
Treasurer
Posts: 31305
Joined: Fri Oct 21, 2005 12:48 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/rcmatt007/
Location: New River Valley, Virginia

Re: back to work on the 76 ltd

#24

Post by rcmatt007 »

rather amazing
DSC_0443.JPG
DSC_0443.JPG (172.8 KiB) Viewed 1067 times
taking out the bolts, three big middle ones still too tight.... what a collection of bolts
DSC_0445.JPG
DSC_0445.JPG (201.57 KiB) Viewed 1067 times
DSC_0447.JPG
DSC_0447.JPG (196.84 KiB) Viewed 1067 times
-Rodger-
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, BOTM June 2015 de-evolving this very moment viewtopic.php?f=30&t=65511
76 Ltd "cookies bike" ALMOST DONE
79 project, finished, FOR SALE
'86 1200 (Beth's)(FOR SALE) with motorvation sidecar (sidecar sold) , July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's) (FOR SALE). I guess you can say we have MBS
User avatar
Fred Camper
Vice President
Vice President
Posts: 6890
Joined: Wed Aug 12, 2009 9:38 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Jeff+Bozeman/
Location: Metro Detroit
Contact:

Re: back to work on the 76 ltd

#25

Post by Fred Camper »

This is not a collection of bolts, but a fine engine designed by knowledgeable engineers in Japan some 49 years back with skills exceeding many other motorcycle engine designers. Thank you for taking good care of this girl and she will certainly reward you for many years to come.
Proud member of the NGW Cartel (Rochester MI)
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'

You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
User avatar
rcmatt007
Treasurer
Treasurer
Posts: 31305
Joined: Fri Oct 21, 2005 12:48 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/rcmatt007/
Location: New River Valley, Virginia

Re: back to work on the 76 ltd

#26

Post by rcmatt007 »

opps the last picture was supposed to be the assortment of bolts holding it together
DSC_0446.JPG
DSC_0446.JPG (152.09 KiB) Viewed 1045 times
-Rodger-
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, BOTM June 2015 de-evolving this very moment viewtopic.php?f=30&t=65511
76 Ltd "cookies bike" ALMOST DONE
79 project, finished, FOR SALE
'86 1200 (Beth's)(FOR SALE) with motorvation sidecar (sidecar sold) , July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's) (FOR SALE). I guess you can say we have MBS
User avatar
rcmatt007
Treasurer
Treasurer
Posts: 31305
Joined: Fri Oct 21, 2005 12:48 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/rcmatt007/
Location: New River Valley, Virginia

Re: back to work on the 76 ltd

#27

Post by rcmatt007 »

got the case apart... I do not think the shift forks were the issue. Now I am trying to figure out how to get the transmission gears out. one half was easy
DSC_0473.JPG
DSC_0473.JPG (163.86 KiB) Viewed 910 times
DSC_0474.JPG
DSC_0474.JPG (194.11 KiB) Viewed 910 times
DSC_0475.JPG
DSC_0475.JPG (165.51 KiB) Viewed 910 times
DSC_0476.JPG
DSC_0476.JPG (190.76 KiB) Viewed 910 times
-Rodger-
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, BOTM June 2015 de-evolving this very moment viewtopic.php?f=30&t=65511
76 Ltd "cookies bike" ALMOST DONE
79 project, finished, FOR SALE
'86 1200 (Beth's)(FOR SALE) with motorvation sidecar (sidecar sold) , July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's) (FOR SALE). I guess you can say we have MBS
User avatar
rcmatt007
Treasurer
Treasurer
Posts: 31305
Joined: Fri Oct 21, 2005 12:48 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/rcmatt007/
Location: New River Valley, Virginia

Re: back to work on the 76 ltd

#28

Post by rcmatt007 »

got it out. I found three teeth in the crankcase, but 6 are broken. Methinks some PO drained three teeth out at some point.
DSC_0484.JPG
DSC_0484.JPG (219 KiB) Viewed 908 times
-Rodger-
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, BOTM June 2015 de-evolving this very moment viewtopic.php?f=30&t=65511
76 Ltd "cookies bike" ALMOST DONE
79 project, finished, FOR SALE
'86 1200 (Beth's)(FOR SALE) with motorvation sidecar (sidecar sold) , July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's) (FOR SALE). I guess you can say we have MBS
User avatar
rcmatt007
Treasurer
Treasurer
Posts: 31305
Joined: Fri Oct 21, 2005 12:48 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/rcmatt007/
Location: New River Valley, Virginia

Re: back to work on the 76 ltd

#29

Post by rcmatt007 »

have the fleabay transmission in.... it has all its teeth..... now the QUESTION.... do I put some sort of sealer when I put the two halves of the case together????
-Rodger-
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, BOTM June 2015 de-evolving this very moment viewtopic.php?f=30&t=65511
76 Ltd "cookies bike" ALMOST DONE
79 project, finished, FOR SALE
'86 1200 (Beth's)(FOR SALE) with motorvation sidecar (sidecar sold) , July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's) (FOR SALE). I guess you can say we have MBS
User avatar
CYBORG
Moderator
Moderator
Posts: 24537
Joined: Mon Jan 14, 2008 12:52 pm
Location: Muskegon mich

Re: back to work on the 76 ltd

#30

Post by CYBORG »

I use a thin coat of Yama-bond. Just for security
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
Post Reply

Return to “Members Restorations and Projects”