Yellow '76: Getting Some Sun
Moderators: Brant, Sagebrush, Forum Moderators
- Rednaxs60
- Silver Member
- Posts: 974
- Joined: Mon Nov 30, 2015 11:14 pm
- Location: Victoria, BC, Canada
Re: Yellow '76: Exxon Valdez
I use Honda Bond 4 for metal to metal (engine cases and such) and gaskets was well. Really good product.
"When writing the Story of your life, don't let anyone else hold the pen."
Ernest
1985 GL1200 Limited Edition
2014 Can-Am Spyder RT LE
2021 Royal Enfield Himalayan
1995 GL1500 SE CDN Edition (sold)
2012 Suzuki DL1000 VStrom (sold)
Ontario 1985 GL1200 Limited Edition (sold)
2008 GL1800 (sold)
Ernest
1985 GL1200 Limited Edition
2014 Can-Am Spyder RT LE
2021 Royal Enfield Himalayan
1995 GL1500 SE CDN Edition (sold)
2012 Suzuki DL1000 VStrom (sold)
Ontario 1985 GL1200 Limited Edition (sold)
2008 GL1800 (sold)
- pidjones
- SUPER BIKER!!!!
- Posts: 3237
- Joined: Wed May 22, 2013 4:06 pm
- Location: East TN
Re: Yellow '76: Exxon Valdez
I'll second that. Used for case jojnts on 2 strokes that must be air-tight with no gaskets. Several names for it (Yamabond, Threebond, Honda Bond 4, etc.) but the same great product. Usually available on Amazon. Not as easy to remove as Indian Head, but seals better.
"Love 'em all.... let God sort 'em out!"
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
- Lucien Harpress
- Honored Life Member
- Posts: 4077
- Joined: Sat Dec 24, 2011 11:41 am
- Location: Michigan
Re: Yellow '76: Exxon Valdez
I've got a tube of Threebond ready to go, actually. Funny enough, it was closing up the cases for my CB750 (and using the proper sealant for it) that got me wondering about my GL1000 problem. I'd never sealed that area up between the cam holders and heads before, but something "clicked" after my 750 job- why not? It's metal to metal, but there's shockingly little documentation of it actually leaking for others.
Ah well. It was just nice to confirm it before tearing everything apart again.
Ah well. It was just nice to confirm it before tearing everything apart again.
1997 Valkyrie- Light Cutomization, but Too Busy Riding
1980 KZ1300- Bike's Haunted
1976 GL1000 (Yellow)- It Runs (Poorly) and Doesn't Leak (Mostly)
1974 Velosolex 3800- Better Than Walking
1972 CB750- Broke the Chain And Ate the Motor
1969 CT90- The Most Fun You Can Have on 90ccs.
1965 CA77 Dream- Needs a Full Teardown, but Complete
All advice I give is only valid until an expert corrects me.
1980 KZ1300- Bike's Haunted
1976 GL1000 (Yellow)- It Runs (Poorly) and Doesn't Leak (Mostly)
1974 Velosolex 3800- Better Than Walking
1972 CB750- Broke the Chain And Ate the Motor
1969 CT90- The Most Fun You Can Have on 90ccs.
1965 CA77 Dream- Needs a Full Teardown, but Complete
All advice I give is only valid until an expert corrects me.
- Lucien Harpress
- Honored Life Member
- Posts: 4077
- Joined: Sat Dec 24, 2011 11:41 am
- Location: Michigan
Re: Yellow '76: Back In It
I'm genuinely disappointed I've had to get to a point where I can get this apart this much, this fast.
I managed to get the left side apart, sealed, and back together, but.... I may try again once it dries. I got both the cam towers and the head nice and clean in the sealing areas while it was laid flat, but as I was bolting it up vertical some of the residual oil on either the head or the cam leaked down near to where the sealant had been applied. I'm about 70% positive it's fine, but I'm not going to tear it apart this far again in case I get hit with the 30%.
Still, hard part is done, and I'm REALLY looking forward to a bike I can ride and not have to worry about.
UPDATE: I was still up and about, so I took things apart, cleaned them better, and re-applied the Threebond. I definitely feel better about it. That said, from the old sealant that was left on from the first try, you can tell that the tolerances were MUCH tighter on the front than on the back (despite being torqued down correctly).
I had a thin film of oil coating the inside of the timing belt cover, so it was leaking on that end too. But not nearly as bad as the rear.
Regardless, I'm genuinely hoping this finally gets it done.
I managed to get the left side apart, sealed, and back together, but.... I may try again once it dries. I got both the cam towers and the head nice and clean in the sealing areas while it was laid flat, but as I was bolting it up vertical some of the residual oil on either the head or the cam leaked down near to where the sealant had been applied. I'm about 70% positive it's fine, but I'm not going to tear it apart this far again in case I get hit with the 30%.
Still, hard part is done, and I'm REALLY looking forward to a bike I can ride and not have to worry about.
UPDATE: I was still up and about, so I took things apart, cleaned them better, and re-applied the Threebond. I definitely feel better about it. That said, from the old sealant that was left on from the first try, you can tell that the tolerances were MUCH tighter on the front than on the back (despite being torqued down correctly).
I had a thin film of oil coating the inside of the timing belt cover, so it was leaking on that end too. But not nearly as bad as the rear.
Regardless, I'm genuinely hoping this finally gets it done.
1997 Valkyrie- Light Cutomization, but Too Busy Riding
1980 KZ1300- Bike's Haunted
1976 GL1000 (Yellow)- It Runs (Poorly) and Doesn't Leak (Mostly)
1974 Velosolex 3800- Better Than Walking
1972 CB750- Broke the Chain And Ate the Motor
1969 CT90- The Most Fun You Can Have on 90ccs.
1965 CA77 Dream- Needs a Full Teardown, but Complete
All advice I give is only valid until an expert corrects me.
1980 KZ1300- Bike's Haunted
1976 GL1000 (Yellow)- It Runs (Poorly) and Doesn't Leak (Mostly)
1974 Velosolex 3800- Better Than Walking
1972 CB750- Broke the Chain And Ate the Motor
1969 CT90- The Most Fun You Can Have on 90ccs.
1965 CA77 Dream- Needs a Full Teardown, but Complete
All advice I give is only valid until an expert corrects me.
- Lucien Harpress
- Honored Life Member
- Posts: 4077
- Joined: Sat Dec 24, 2011 11:41 am
- Location: Michigan
Re: Yellow '76: Back In It
Right side done. I probably could've left it, but I had it apart, so my as well. The back obviously runs the fuel pump, so no seal back there. However, there IS still a tiny strip of metal-to-metal, so that got the glue treatment. The front actually gave me a bit of trouble coming apart, despite only being together for a handful of miles. There was a bit of schmutz that I would almost guarantee was the remains of the previous round of sealant (factory or otherwise), and it was enough to keep the front clean. Still, I got some proper sealant there too, so I don't have to worry about it.
Next up? All the "normal" stuff: belts, valve clearances, timing, etc. Thankfully I've had plenty of practice with that, too.
1997 Valkyrie- Light Cutomization, but Too Busy Riding
1980 KZ1300- Bike's Haunted
1976 GL1000 (Yellow)- It Runs (Poorly) and Doesn't Leak (Mostly)
1974 Velosolex 3800- Better Than Walking
1972 CB750- Broke the Chain And Ate the Motor
1969 CT90- The Most Fun You Can Have on 90ccs.
1965 CA77 Dream- Needs a Full Teardown, but Complete
All advice I give is only valid until an expert corrects me.
1980 KZ1300- Bike's Haunted
1976 GL1000 (Yellow)- It Runs (Poorly) and Doesn't Leak (Mostly)
1974 Velosolex 3800- Better Than Walking
1972 CB750- Broke the Chain And Ate the Motor
1969 CT90- The Most Fun You Can Have on 90ccs.
1965 CA77 Dream- Needs a Full Teardown, but Complete
All advice I give is only valid until an expert corrects me.
- Lucien Harpress
- Honored Life Member
- Posts: 4077
- Joined: Sat Dec 24, 2011 11:41 am
- Location: Michigan
Re: Yellow '76: Back In It
In the grips of winter, motorcycle life is slow. I managed to get the engine sealed up and everything set up enough to get it to run, and.... run it does. Quite well, actually. Well enough that even though I only roughly set the ignition timing via witness mark, it goes pretty well.
The good news? The oil leak is taken care of, or at least taken care of enough. I've put a number of heat cycles though the engine in the past couple weeks, and nothing I see makes me think I've still got problems. Well, oil related ones in any case.
I DO have a last little thing I'd like to button up before spring, namely a coolant leak on the upper coolant hose attachment by the thermostat. This has been an issue for a while that seems to come and go, and there's evidence it had been going on since before I bought the bike. I did replace the hoses with the cut-up Gates hoses, and the lower works fine. But the upper has always given me fits. I've currently got my clamp pinched down all the way, and that just barely seals it. I figure I've got time to fiddle with things, so here's the plan.
-New hose (ordered)
-Clean up the upper thermostat hose barb. To the point of polishing the sucker.
-Worst case scenario? Some type of sealant.
-Ultra worst case scenario? Spend 100 bucks on silicone hoses.
The good news? The oil leak is taken care of, or at least taken care of enough. I've put a number of heat cycles though the engine in the past couple weeks, and nothing I see makes me think I've still got problems. Well, oil related ones in any case.
I DO have a last little thing I'd like to button up before spring, namely a coolant leak on the upper coolant hose attachment by the thermostat. This has been an issue for a while that seems to come and go, and there's evidence it had been going on since before I bought the bike. I did replace the hoses with the cut-up Gates hoses, and the lower works fine. But the upper has always given me fits. I've currently got my clamp pinched down all the way, and that just barely seals it. I figure I've got time to fiddle with things, so here's the plan.
-New hose (ordered)
-Clean up the upper thermostat hose barb. To the point of polishing the sucker.
-Worst case scenario? Some type of sealant.
-Ultra worst case scenario? Spend 100 bucks on silicone hoses.
1997 Valkyrie- Light Cutomization, but Too Busy Riding
1980 KZ1300- Bike's Haunted
1976 GL1000 (Yellow)- It Runs (Poorly) and Doesn't Leak (Mostly)
1974 Velosolex 3800- Better Than Walking
1972 CB750- Broke the Chain And Ate the Motor
1969 CT90- The Most Fun You Can Have on 90ccs.
1965 CA77 Dream- Needs a Full Teardown, but Complete
All advice I give is only valid until an expert corrects me.
1980 KZ1300- Bike's Haunted
1976 GL1000 (Yellow)- It Runs (Poorly) and Doesn't Leak (Mostly)
1974 Velosolex 3800- Better Than Walking
1972 CB750- Broke the Chain And Ate the Motor
1969 CT90- The Most Fun You Can Have on 90ccs.
1965 CA77 Dream- Needs a Full Teardown, but Complete
All advice I give is only valid until an expert corrects me.
- gltriker
- Honored Life Member
- Posts: 5053
- Joined: Fri Sep 24, 2010 9:11 pm
- Location: central NY State
Gates Power Grip Hose Clamps
They're available at walk-in and on-line auto parts stores, Amazon, etc. Rock auto $2.99
soooooo much less expensive than throwing various metal hose clamps and silicone hoses at this leaks prone BOTM
Gates Power Grip p/n 32934 Gates Power Grip Clamp -- Fits Hose (O.D.) 1-5/16" to 1-1/2"
https://www.rockauto.com/en/moreinfo.ph ... 75&jsn=723
-
soooooo much less expensive than throwing various metal hose clamps and silicone hoses at this leaks prone BOTM
Gates Power Grip p/n 32934 Gates Power Grip Clamp -- Fits Hose (O.D.) 1-5/16" to 1-1/2"
https://www.rockauto.com/en/moreinfo.ph ... 75&jsn=723
-
Last edited by gltriker on Wed Dec 28, 2022 10:04 pm, edited 5 times in total.
Cliff (74yrs )
Keep your eyes and ears open and you'll learn something new, everyday.
New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^
RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi
"Can't see the paint when your looking thru the handlebars..........." -Oldewing
"I'd rather Ride than Shine" -RAT Me Too!!
Cliff
'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM https://nakedgoldwingsclub.com/forum/page/Welcome
previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
Keep your eyes and ears open and you'll learn something new, everyday.
New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^
RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi
"Can't see the paint when your looking thru the handlebars..........." -Oldewing
"I'd rather Ride than Shine" -RAT Me Too!!
Cliff
'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM https://nakedgoldwingsclub.com/forum/page/Welcome
previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
- Lucien Harpress
- Honored Life Member
- Posts: 4077
- Joined: Sat Dec 24, 2011 11:41 am
- Location: Michigan
Re: Yellow '76: Back In It
Now THERE'S an idea...
1997 Valkyrie- Light Cutomization, but Too Busy Riding
1980 KZ1300- Bike's Haunted
1976 GL1000 (Yellow)- It Runs (Poorly) and Doesn't Leak (Mostly)
1974 Velosolex 3800- Better Than Walking
1972 CB750- Broke the Chain And Ate the Motor
1969 CT90- The Most Fun You Can Have on 90ccs.
1965 CA77 Dream- Needs a Full Teardown, but Complete
All advice I give is only valid until an expert corrects me.
1980 KZ1300- Bike's Haunted
1976 GL1000 (Yellow)- It Runs (Poorly) and Doesn't Leak (Mostly)
1974 Velosolex 3800- Better Than Walking
1972 CB750- Broke the Chain And Ate the Motor
1969 CT90- The Most Fun You Can Have on 90ccs.
1965 CA77 Dream- Needs a Full Teardown, but Complete
All advice I give is only valid until an expert corrects me.
- gltriker
- Honored Life Member
- Posts: 5053
- Joined: Fri Sep 24, 2010 9:11 pm
- Location: central NY State
Gates Power Grip Hose Clamps , continued
not an idea... this is a SOLUTION. First time I utilized them on trike's internal combustion engine was mid-2012.
Several times since then and never experienced a single solitary coolant hose leak.
A Gates video advises as long as you can apply heat, at least 120 degrees around its total circumference, the thermoplastic hose clamp will shrink down completely tightened.
https://www.eastwood.com/images/pdf/31444Q_inst.pdf
Shield the wires' insulation behind the clamp from the heat gun air blast and git er done.
https://www.youtube.com/watch?v=KEI17izjlo4
https://na01.safelinks.protection.outlo ... reserved=0
note: " * Conform to any shape of hose and housing, even out-of-round fittings. "
completely scrape the scale off the thermostat cover's hose nipple... down to CLEAN metal.
Done.
Last edited by gltriker on Mon Jan 09, 2023 8:58 am, edited 1 time in total.
Cliff (74yrs )
Keep your eyes and ears open and you'll learn something new, everyday.
New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^
RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi
"Can't see the paint when your looking thru the handlebars..........." -Oldewing
"I'd rather Ride than Shine" -RAT Me Too!!
Cliff
'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM https://nakedgoldwingsclub.com/forum/page/Welcome
previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
Keep your eyes and ears open and you'll learn something new, everyday.
New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^
RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi
"Can't see the paint when your looking thru the handlebars..........." -Oldewing
"I'd rather Ride than Shine" -RAT Me Too!!
Cliff
'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM https://nakedgoldwingsclub.com/forum/page/Welcome
previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
- Lucien Harpress
- Honored Life Member
- Posts: 4077
- Joined: Sat Dec 24, 2011 11:41 am
- Location: Michigan
Re: Yellow '76: Back In It
Fun day in the garage today. My heat shrink coolant clamps and new upper hose showed up today, so I decided to get my coolant leak buttoned up for good. And in ways that shouldn't be surprising to me, yet someone still are, I found a new way to make things worse.
I got the radiator off, and discovered that my coolant leak was probably part of the hose that had managed to get folded over when it was installed last time. Still, I had a new hose, and I'd never been a fan of the Gates hose I replaced it with- it's just a hair oversized, and it doesn't fit right. Anyway, new hose goes on (purchased from eBay), Gates clamp goes on, shrinks down nicely, pop on anti-kink spring, get radiator in:
Hose won't attach to the engine block.
Thing is, a combination of a slightly smaller ID, a VERY weak wall (hose folded over rather than slipping on) and a slightly smaller OD (that meant with the spring it was impossible to get a grip on the hose and force it down) led to a radiator that refused to go on. After a lot of effort (and I'm pretty sure a bunch of newly invented swear words) I gave up, threw the hose away, and walked away for the night to decompress.
I'll get back to it soon enough. I need to re-evaluate my options anyway.
If nothing else, I never fail to amuse myself with new and different ways I make things difficult.
I got the radiator off, and discovered that my coolant leak was probably part of the hose that had managed to get folded over when it was installed last time. Still, I had a new hose, and I'd never been a fan of the Gates hose I replaced it with- it's just a hair oversized, and it doesn't fit right. Anyway, new hose goes on (purchased from eBay), Gates clamp goes on, shrinks down nicely, pop on anti-kink spring, get radiator in:
Hose won't attach to the engine block.
Thing is, a combination of a slightly smaller ID, a VERY weak wall (hose folded over rather than slipping on) and a slightly smaller OD (that meant with the spring it was impossible to get a grip on the hose and force it down) led to a radiator that refused to go on. After a lot of effort (and I'm pretty sure a bunch of newly invented swear words) I gave up, threw the hose away, and walked away for the night to decompress.
I'll get back to it soon enough. I need to re-evaluate my options anyway.
If nothing else, I never fail to amuse myself with new and different ways I make things difficult.
1997 Valkyrie- Light Cutomization, but Too Busy Riding
1980 KZ1300- Bike's Haunted
1976 GL1000 (Yellow)- It Runs (Poorly) and Doesn't Leak (Mostly)
1974 Velosolex 3800- Better Than Walking
1972 CB750- Broke the Chain And Ate the Motor
1969 CT90- The Most Fun You Can Have on 90ccs.
1965 CA77 Dream- Needs a Full Teardown, but Complete
All advice I give is only valid until an expert corrects me.
1980 KZ1300- Bike's Haunted
1976 GL1000 (Yellow)- It Runs (Poorly) and Doesn't Leak (Mostly)
1974 Velosolex 3800- Better Than Walking
1972 CB750- Broke the Chain And Ate the Motor
1969 CT90- The Most Fun You Can Have on 90ccs.
1965 CA77 Dream- Needs a Full Teardown, but Complete
All advice I give is only valid until an expert corrects me.
- Fred Camper
- Vice President
- Posts: 6890
- Joined: Wed Aug 12, 2009 9:38 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Jeff+Bozeman/
- Location: Metro Detroit
- Contact:
Re: Yellow '76: I'll Get It One Day
Walking away is often the best choice. You will get this hose on today!
Proud member of the NGW Cartel (Rochester MI)
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'
You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'
You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
- gltriker
- Honored Life Member
- Posts: 5053
- Joined: Fri Sep 24, 2010 9:11 pm
- Location: central NY State
Yellow '76: I'll Get It One Day - instructions for success
Set the anti-kink coil spring and second hose clamp aside for now.
Concentrate on the aluminum alloy thermostat cover hose nipple and its Gates heat shrink hose clamp, FIRST.
Got that thermostat cover heat shrink hose clamp tightly installed on the aluminum nipple now? YES!
(I'd strongly advise You get somebody to assist and securely manipulate the radiator as needed to complete this cold weather project)
Next, push the radiator far enough forward to disengage the upper end of the radiator hose, slide the anti-kink coil spring onto the loose upper end of the radiator hose then twist and compact the entire length of spring coils tightly against each other and the edge of the heat shrunk lower Gates hose clamp, too.
Doing so will provide adequate space to slide the upper Gates hose clamp onto hose itself, then push the hose onto the radiator nipple.
You can figure out the rest on your own now.
Concentrate on the aluminum alloy thermostat cover hose nipple and its Gates heat shrink hose clamp, FIRST.
Got that thermostat cover heat shrink hose clamp tightly installed on the aluminum nipple now? YES!
(I'd strongly advise You get somebody to assist and securely manipulate the radiator as needed to complete this cold weather project)
Next, push the radiator far enough forward to disengage the upper end of the radiator hose, slide the anti-kink coil spring onto the loose upper end of the radiator hose then twist and compact the entire length of spring coils tightly against each other and the edge of the heat shrunk lower Gates hose clamp, too.
Doing so will provide adequate space to slide the upper Gates hose clamp onto hose itself, then push the hose onto the radiator nipple.
You can figure out the rest on your own now.
Cliff (74yrs )
Keep your eyes and ears open and you'll learn something new, everyday.
New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^
RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi
"Can't see the paint when your looking thru the handlebars..........." -Oldewing
"I'd rather Ride than Shine" -RAT Me Too!!
Cliff
'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM https://nakedgoldwingsclub.com/forum/page/Welcome
previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
Keep your eyes and ears open and you'll learn something new, everyday.
New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^
RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi
"Can't see the paint when your looking thru the handlebars..........." -Oldewing
"I'd rather Ride than Shine" -RAT Me Too!!
Cliff
'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM https://nakedgoldwingsclub.com/forum/page/Welcome
previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
- Lucien Harpress
- Honored Life Member
- Posts: 4077
- Joined: Sat Dec 24, 2011 11:41 am
- Location: Michigan
Re: Yellow '76: Getting Some Sun
Bad news first- I went into my garage today to check on my little fleet, and noticed that for whatever reason, be it fuel, oil, or various coolant leaks, quite a bit of paint had bubbled up on the top of my engine block. Unfortunate.
On the plus side? It was 50 degrees out, and you can't see it from the saddle.
It ran rather well, especially considering my ignition timing is just off a set of witness marks from the last time I pulled the timing plate. On the plus side, no leaks that I could see, oil or coolant. The paint thing I'd like to address at some point, but that will involved carb pulling, and for right now, that can wait. I'm just happy for some saddle time.
On the plus side? It was 50 degrees out, and you can't see it from the saddle.
It ran rather well, especially considering my ignition timing is just off a set of witness marks from the last time I pulled the timing plate. On the plus side, no leaks that I could see, oil or coolant. The paint thing I'd like to address at some point, but that will involved carb pulling, and for right now, that can wait. I'm just happy for some saddle time.
1997 Valkyrie- Light Cutomization, but Too Busy Riding
1980 KZ1300- Bike's Haunted
1976 GL1000 (Yellow)- It Runs (Poorly) and Doesn't Leak (Mostly)
1974 Velosolex 3800- Better Than Walking
1972 CB750- Broke the Chain And Ate the Motor
1969 CT90- The Most Fun You Can Have on 90ccs.
1965 CA77 Dream- Needs a Full Teardown, but Complete
All advice I give is only valid until an expert corrects me.
1980 KZ1300- Bike's Haunted
1976 GL1000 (Yellow)- It Runs (Poorly) and Doesn't Leak (Mostly)
1974 Velosolex 3800- Better Than Walking
1972 CB750- Broke the Chain And Ate the Motor
1969 CT90- The Most Fun You Can Have on 90ccs.
1965 CA77 Dream- Needs a Full Teardown, but Complete
All advice I give is only valid until an expert corrects me.
- Fred Camper
- Vice President
- Posts: 6890
- Joined: Wed Aug 12, 2009 9:38 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Jeff+Bozeman/
- Location: Metro Detroit
- Contact:
Re: Yellow '76: Getting Some Sun
Be hard to notice at even 30 mph!!
Proud member of the NGW Cartel (Rochester MI)
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'
You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
1977 GL1000 BADDOG (April 2012 BOTM)
1976 LTD - '993 LTD...and so it begins'
You should remember that it's peace of mind you're after and not just fixing the machine. R.Pirsig
- CYBORG
- Moderator
- Posts: 24538
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: Yellow '76: Getting Some Sun
looks good from here
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
-
- Similar Topics
- Replies
- Views
- Last post
-
- 6 Replies
- 1058 Views
-
Last post by Carson.0