Another project followed me home today, 82 Wing.

A forum for stories, pics and updates of your resto's. Be it a barn find, Grampas hand me down or a bike being brought back to it's former glory.If you are restoring it, show us your stuff!

Moderators: Brant, Sagebrush, Forum Moderators

Post Reply
User avatar
ritalz
Honored Life Member
Honored Life Member
Posts: 4090
Joined: Sat Jun 25, 2005 10:22 am
Location: St Louis, MO

Re: Another project followed me home today, 82 Wing.

#31

Post by ritalz »

Good news on the home front today. While tracing and cleaning contacts, I pulled the spark units off and cleaned all the surfaces and the frame mount. Used my ohm meter to see if the pins on both units were the same, they are. Compared them to a spare set and they are different. For grins I cleaned and mounted the spare set and it fired up on all four. It still runs rough and will die under 2k. I had previously swapped the spark units from side to side with no effect. Not sure what happened here just glad to hear it run again.
Al

2003 Goldwing Daily Rider
1975 Goldwing 'Max'
1984 Goldwing New Bagger Project
1976 Goldwing 'Grocery Getter' Sold
1985 Goldwing Interstate 'NCC-1985' sold
1981 Silverwing Sold
1982 Goldeing Project Sold
1981 Goldwing Parted Out
1983 Goldwing Project Sold
1973 CB500F Long Gone
1966 CL77 First Street Bike
http://www.ngwclub.com/gallery3/index.p ... ans/ritalz
User avatar
ritalz
Honored Life Member
Honored Life Member
Posts: 4090
Joined: Sat Jun 25, 2005 10:22 am
Location: St Louis, MO

Re: Another project followed me home today, 82 Wing.

#32

Post by ritalz »

Looks like I may have head gasket issues to deal with also. Getting a lot of white smoke smoke and some unburned fuel on the left side. Not going to jump in right away in hopes I can get it running a bit better first. Still runs a bit rough and will die if it gets under 2k. On top of it all I may have screwed up my new starter in the process.
Al

2003 Goldwing Daily Rider
1975 Goldwing 'Max'
1984 Goldwing New Bagger Project
1976 Goldwing 'Grocery Getter' Sold
1985 Goldwing Interstate 'NCC-1985' sold
1981 Silverwing Sold
1982 Goldeing Project Sold
1981 Goldwing Parted Out
1983 Goldwing Project Sold
1973 CB500F Long Gone
1966 CL77 First Street Bike
http://www.ngwclub.com/gallery3/index.p ... ans/ritalz
User avatar
ritalz
Honored Life Member
Honored Life Member
Posts: 4090
Joined: Sat Jun 25, 2005 10:22 am
Location: St Louis, MO

Re: Another project followed me home today, 82 Wing.

#33

Post by ritalz »

OK. I need help with this problem. #4 refuses to hit. Getting plenty of fuel, 160 lbs compression and sparks fine when I lay the plug om the head. Am I missing something?
Second problem; ignition timing seems it is advanced too much. Cranking with the kill switch on will spin with no problem. Turn the switch to run and it cranks real slow. Don't know if the timing is adjustable but sure feels like it needs to be. I'm gonna pop the belt covers to verify the marks. Pretty sure they are lined up but will check maybe tomorrow. I did swap the plug wires to make sure I didn't wire the coils backwards.
Just a little lost at the moment.
Al

2003 Goldwing Daily Rider
1975 Goldwing 'Max'
1984 Goldwing New Bagger Project
1976 Goldwing 'Grocery Getter' Sold
1985 Goldwing Interstate 'NCC-1985' sold
1981 Silverwing Sold
1982 Goldeing Project Sold
1981 Goldwing Parted Out
1983 Goldwing Project Sold
1973 CB500F Long Gone
1966 CL77 First Street Bike
http://www.ngwclub.com/gallery3/index.p ... ans/ritalz
User avatar
ritalz
Honored Life Member
Honored Life Member
Posts: 4090
Joined: Sat Jun 25, 2005 10:22 am
Location: St Louis, MO

Re: Another project followed me home today, 82 Wing.

#34

Post by ritalz »

My head gasket statement appears to be premature. The white smoke did not have the sweet smell of antifreeze. Finally got the #4 cylinder to fire and the smoke is all but gone. I still have a ways to go because it still won't idle below 2k. I now have a second set of carbs to test with. Put the carb styx on and did a preliminary sync. Still having starter issues but the seller is making good on that. I'm getting closer.
Al

2003 Goldwing Daily Rider
1975 Goldwing 'Max'
1984 Goldwing New Bagger Project
1976 Goldwing 'Grocery Getter' Sold
1985 Goldwing Interstate 'NCC-1985' sold
1981 Silverwing Sold
1982 Goldeing Project Sold
1981 Goldwing Parted Out
1983 Goldwing Project Sold
1973 CB500F Long Gone
1966 CL77 First Street Bike
http://www.ngwclub.com/gallery3/index.p ... ans/ritalz
User avatar
Oldewing
Secretary
Secretary
Posts: 8177
Joined: Wed Jun 08, 2005 8:19 pm
Location: Gahanna Ohio

Re: Another project followed me home today, 82 Wing.

#35

Post by Oldewing »

Keep chippin' away at her Al, you will get it.

Only timing that changes on the 82 is the vac advance that pulls of number 3.
82 GL1100 Interstate-Oldewing October 23 BOTM
06 GL1800 Road bike, as in Rode alot...
Sometimes I wrestle with my inner demons.........
Other times we just hug.......

Team 898
Team LTD 993
Team 76 R2B3
And always remember: beer has some food value--but food has NO beer value...
User avatar
ritalz
Honored Life Member
Honored Life Member
Posts: 4090
Joined: Sat Jun 25, 2005 10:22 am
Location: St Louis, MO

Re: Another project followed me home today, 82 Wing.

#36

Post by ritalz »

Planning on chipping away. Weather didn't cooperate today to do anything. Went grocery shopping instead. I do need to take a closer look at the advance tube, pretty sure it is not the correct type of tubing.
Al

2003 Goldwing Daily Rider
1975 Goldwing 'Max'
1984 Goldwing New Bagger Project
1976 Goldwing 'Grocery Getter' Sold
1985 Goldwing Interstate 'NCC-1985' sold
1981 Silverwing Sold
1982 Goldeing Project Sold
1981 Goldwing Parted Out
1983 Goldwing Project Sold
1973 CB500F Long Gone
1966 CL77 First Street Bike
http://www.ngwclub.com/gallery3/index.p ... ans/ritalz
User avatar
ritalz
Honored Life Member
Honored Life Member
Posts: 4090
Joined: Sat Jun 25, 2005 10:22 am
Location: St Louis, MO

Re: Another project followed me home today, 82 Wing.

#37

Post by ritalz »

Another wet day here so not much going on. At least the new starter has arrived and the previous seller has done a full refund. Borrowed a carb adjust tool so I can start on fine adjustments. Hoping for a dry day tomorrow.
Al

2003 Goldwing Daily Rider
1975 Goldwing 'Max'
1984 Goldwing New Bagger Project
1976 Goldwing 'Grocery Getter' Sold
1985 Goldwing Interstate 'NCC-1985' sold
1981 Silverwing Sold
1982 Goldeing Project Sold
1981 Goldwing Parted Out
1983 Goldwing Project Sold
1973 CB500F Long Gone
1966 CL77 First Street Bike
http://www.ngwclub.com/gallery3/index.p ... ans/ritalz
User avatar
ritalz
Honored Life Member
Honored Life Member
Posts: 4090
Joined: Sat Jun 25, 2005 10:22 am
Location: St Louis, MO

Re: Another project followed me home today, 82 Wing.

#38

Post by ritalz »

One step forward an two steps back. Still could not get the bike to idle below 2k. Decided to try the set of carbs from another member for comparison. Spun the engine without compression to fill the bowls and the starter relay stuck. Before I could break the connection the main connection for the brushes heated enough to break connection. This is on my brand new starter. I believe I can repair the damaged connection, just a little discouraging.
Al

2003 Goldwing Daily Rider
1975 Goldwing 'Max'
1984 Goldwing New Bagger Project
1976 Goldwing 'Grocery Getter' Sold
1985 Goldwing Interstate 'NCC-1985' sold
1981 Silverwing Sold
1982 Goldeing Project Sold
1981 Goldwing Parted Out
1983 Goldwing Project Sold
1973 CB500F Long Gone
1966 CL77 First Street Bike
http://www.ngwclub.com/gallery3/index.p ... ans/ritalz
User avatar
Track T 2411
Honored Life Member
Honored Life Member
Posts: 8482
Joined: Thu May 29, 2008 9:37 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
Location: Prairie du Sac Wisconsin

Re: Another project followed me home today, 82 Wing.

#39

Post by Track T 2411 »

Man, that bike is fighting you every which way it can!
"I have no special talent. I am only passionately curious." - Albert Einstein

"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow

"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown

Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!

Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!

In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
User avatar
ritalz
Honored Life Member
Honored Life Member
Posts: 4090
Joined: Sat Jun 25, 2005 10:22 am
Location: St Louis, MO

Re: Another project followed me home today, 82 Wing.

#40

Post by ritalz »

It is being a royal pain. Got the starter repaired tonight. Need to look into the relay before I try again. Won't get much done over the next few days, busy with work and such.
Al

2003 Goldwing Daily Rider
1975 Goldwing 'Max'
1984 Goldwing New Bagger Project
1976 Goldwing 'Grocery Getter' Sold
1985 Goldwing Interstate 'NCC-1985' sold
1981 Silverwing Sold
1982 Goldeing Project Sold
1981 Goldwing Parted Out
1983 Goldwing Project Sold
1973 CB500F Long Gone
1966 CL77 First Street Bike
http://www.ngwclub.com/gallery3/index.p ... ans/ritalz
User avatar
ritalz
Honored Life Member
Honored Life Member
Posts: 4090
Joined: Sat Jun 25, 2005 10:22 am
Location: St Louis, MO

Re: Another project followed me home today, 82 Wing.

#41

Post by ritalz »

IMG_20191031_214240.jpg
IMG_20191031_214240.jpg (66.42 KiB) Viewed 157 times
Built a starter relay from a heavy duty tractor relay and the original connectors. Curious to see how it works. Hope to put it all back together this weekend.
Al

2003 Goldwing Daily Rider
1975 Goldwing 'Max'
1984 Goldwing New Bagger Project
1976 Goldwing 'Grocery Getter' Sold
1985 Goldwing Interstate 'NCC-1985' sold
1981 Silverwing Sold
1982 Goldeing Project Sold
1981 Goldwing Parted Out
1983 Goldwing Project Sold
1973 CB500F Long Gone
1966 CL77 First Street Bike
http://www.ngwclub.com/gallery3/index.p ... ans/ritalz
User avatar
ritalz
Honored Life Member
Honored Life Member
Posts: 4090
Joined: Sat Jun 25, 2005 10:22 am
Location: St Louis, MO

Re: Another project followed me home today, 82 Wing.

#42

Post by ritalz »

The new relay works great. No additional wiring modifications needed. Only problem is the physical size is bigger and had to squeeze it in. Made a boot out of some old inner tube and tied it in place with some zip ties. Motor spins and no sparks. dancr
Al

2003 Goldwing Daily Rider
1975 Goldwing 'Max'
1984 Goldwing New Bagger Project
1976 Goldwing 'Grocery Getter' Sold
1985 Goldwing Interstate 'NCC-1985' sold
1981 Silverwing Sold
1982 Goldeing Project Sold
1981 Goldwing Parted Out
1983 Goldwing Project Sold
1973 CB500F Long Gone
1966 CL77 First Street Bike
http://www.ngwclub.com/gallery3/index.p ... ans/ritalz
User avatar
Track T 2411
Honored Life Member
Honored Life Member
Posts: 8482
Joined: Thu May 29, 2008 9:37 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
Location: Prairie du Sac Wisconsin

Re: Another project followed me home today, 82 Wing.

#43

Post by Track T 2411 »

Nice!
"I have no special talent. I am only passionately curious." - Albert Einstein

"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow

"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown

Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!

Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!

In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
User avatar
ritalz
Honored Life Member
Honored Life Member
Posts: 4090
Joined: Sat Jun 25, 2005 10:22 am
Location: St Louis, MO

Re: Another project followed me home today, 82 Wing.

#44

Post by ritalz »

Put it all back together with the second set of carbs. Good news is it does run. Bad news is it runs the same as with the original carbs. Anything under 2k and it will stall. Carbs are synced, each header gets hot but uneven and air screws are at 1.5 turns except #1. Increased to 2 turns because the header temp was very low. Don't know what to try next. Still seems like it is firing too early because when warm it struggles to turn over when cranking.
Al

2003 Goldwing Daily Rider
1975 Goldwing 'Max'
1984 Goldwing New Bagger Project
1976 Goldwing 'Grocery Getter' Sold
1985 Goldwing Interstate 'NCC-1985' sold
1981 Silverwing Sold
1982 Goldeing Project Sold
1981 Goldwing Parted Out
1983 Goldwing Project Sold
1973 CB500F Long Gone
1966 CL77 First Street Bike
http://www.ngwclub.com/gallery3/index.p ... ans/ritalz
User avatar
robin1731
Membership Admin
Membership Admin
Posts: 21724
Joined: Mon May 29, 2006 8:31 am
Location: Decatur, Indiana

Re: Another project followed me home today, 82 Wing.

#45

Post by robin1731 »

That at least eliminates the carbs. So it was progress. ;)

Compression check?
Leakdown?
And yes, timing.

.
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Members Restorations and Projects”