1982 1100A
Moderators: Brant, Sagebrush, Forum Moderators
-
- Lead Member
- Posts: 7
- Joined: Sat Sep 09, 2017 9:04 pm
1982 1100A
Got a free used 1982 GL1100A, that I’m in the process of getting running and then customizing. Not 100% sure yet how I’m going to customize it, thinking of striping it down, chopping it a bit, and blacking it out. So far, I’ve replaced the starter and pulled the carbs to rebuild. Just got Randakks kit, hope to rebuild on Saturday. Didn’t take any pics before I dug right in, so the one I’m posting is already torn apart. Next up is plugs and timing belt.
Anyone have any suggestions for cleaning the exterior of the carbs, and the engine?
Anyone have any suggestions for cleaning the exterior of the carbs, and the engine?
- Attachments
-
- DB032A51-638C-46C0-9DFA-8E758D1A63EA.jpeg (171.34 KiB) Viewed 332 times
MDFootballCoach
1982 GL1100A
1982 GL1100A
- CYBORG
- Moderator
- Posts: 24538
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: 1982 1100A
welcome. Jump right in. I suggest soap and water
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
- Martiangod
- Cast Iron Member
- Posts: 94
- Joined: Sun Sep 24, 2017 6:24 pm
- Contact:
Re: 1982 1100A
i used a soft wire wheel on drill after engine shampoo on exterior of carbs, the intake tubes and piston hats went in ultrasonic, that softened the clear coat right up and it wiped off with rag. engine several engine shampoos and pressure washes
Under the knife again
1983 1100 Eh!!!
$300 and climbing
Lots and lots of Red....
Old man, first bike, first build
1983 1100 Eh!!!
$300 and climbing
Lots and lots of Red....
Old man, first bike, first build
-
- Zinc Member
- Posts: 36
- Joined: Thu Oct 12, 2017 2:53 am
- Location: Chicago, IL
Re: 1982 1100A
I just bought a 1982 Aspencade so interested to see where you take it. Post more pictures.
-
- Lead Member
- Posts: 7
- Joined: Sat Sep 09, 2017 9:04 pm
Re: 1982 1100A
Anyone have a good suggestion for rounded out heads on the cover screws for the carburetor? I have tried getting a pair of vice grips on the outside but the screws just seem to be soft. Any idea where to get replacements if i can get them off?
MDFootballCoach
1982 GL1100A
1982 GL1100A
- Sugs
- Gold Member
- Posts: 1069
- Joined: Sun Aug 09, 2015 6:12 pm
- Location: Springfield, MO
Re: 1982 1100A
Can you get a dremel with a diamond grinding wheel in there to cut a slot big enough for a large flat blade screwdriver?
_______________________
'79 Honda GL1000 Goldwing
'79 Honda GL1000 Goldwing
-
- Lead Member
- Posts: 7
- Joined: Sat Sep 09, 2017 9:04 pm
-
- Silver Member
- Posts: 654
- Joined: Fri May 26, 2017 11:07 am
Re: 1982 1100A
Most Honda bolts and screws for at least the last 35 years are still available, unless they're really a special size, or dedicated usage.
https://www.partsfish.com/oemparts/a/ho ... nt-parts-1
https://www.partsfish.com/oemparts/a/ho ... nt-parts-1
- ericheath
- Honored Life Member
- Posts: 9580
- Joined: Wed Jul 29, 2009 11:20 am
- Location: Winnipeg, Manituba
Re: 1982 1100A
In case you haven’t read or heard this Honda used JIS screws and are different than Philips screws. The right driver makes a big difference. If someone’s already jammed them up, it’s whatever works.
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
-
- Lead Member
- Posts: 7
- Joined: Sat Sep 09, 2017 9:04 pm
Re: 1982 1100A
Quick update, Timing belts replaced, carbs rebuilt and reinstalled. Hoping to do the fuel lines and fuel filter in the next week or so. Anyone have any suggestions on a washable filter and where to get it? I was hoping to get the one from Randakks but it appears as it’s unavailable.
MDFootballCoach
1982 GL1100A
1982 GL1100A
- 5speed
- Honored Life Member
- Posts: 5312
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: 1982 1100A
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
- CYBORG
- Moderator
- Posts: 24538
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: 1982 1100A
I use that one on all my bikes. Work great
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
- Track T 2411
- Honored Life Member
- Posts: 8482
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: 1982 1100A
I have the longer (automotive?) version of the above filter, purchased at O'Reilly's...
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- toolbox
- Titanium Member
- Posts: 489
- Joined: Sun Feb 28, 2016 1:54 am
- Location: Montana
Re: 1982 1100A
I used the exact same one. It even fit in the factory bracket, which was a nice bonus. Under $10 too.Track T 2411 wrote:I have the longer (automotive?) version of the above filter, purchased at O'Reilly's...
-
- Similar Topics
- Replies
- Views
- Last post
-
- 9 Replies
- 642 Views
-
Last post by miltoncaniff
-
- 18 Replies
- 456 Views
-
Last post by wayneperry
-
- 12 Replies
- 1064 Views
-
Last post by wren337