!983 Project-Started with watching to many car shows
Moderators: Brant, Sagebrush, Forum Moderators
-
- Tin Member
- Posts: 10
- Joined: Sun Feb 12, 2017 4:46 pm
- Location: Cape Cod Massachusetts
!983 Project-Started with watching to many car shows
Hi,
New guy here....
I was tired of watching reruns of Wheeler Dealer, Fast and Loud, Bitchen Rides, etc....you know all the Velocity shows where they restore cars.
Went out and bought a 1983 Gold Wing Interstate. Perfect running condition (before the strip down anyway).
I am in the middle of a restoration/transaction to a naked GoldWing
Sometimes seems like still at the start!
In the breakdown stages; Front forks off, Radiator off, Carbs off, all paintable stuff is off at the painter, etc.
Perfect project for a long cold snowy Winter.
New guy here....
I was tired of watching reruns of Wheeler Dealer, Fast and Loud, Bitchen Rides, etc....you know all the Velocity shows where they restore cars.
Went out and bought a 1983 Gold Wing Interstate. Perfect running condition (before the strip down anyway).
I am in the middle of a restoration/transaction to a naked GoldWing
Sometimes seems like still at the start!
In the breakdown stages; Front forks off, Radiator off, Carbs off, all paintable stuff is off at the painter, etc.
Perfect project for a long cold snowy Winter.
- CYBORG
- Moderator
- Posts: 24537
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: !983 Project-Started with watching to many car shows
Welcome from West Michigan. Where are you located?
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
- TNTbefree
- Silver Member
- Posts: 928
- Joined: Sun Mar 23, 2014 8:49 am
- Location: Jacksonville, FL
Re: !983 Project-Started with watching to many car shows
Looks like a great start. Keep us posted with lots of pics and welcome to the club.
-
- Tin Member
- Posts: 10
- Joined: Sun Feb 12, 2017 4:46 pm
- Location: Cape Cod Massachusetts
Re: !983 Project-Started with watching to many car shows
I'm located in Massachusetts, Cape Cod area. Sorry about the non rotated pictures...thats how they upload.
Looking forward to seeing this project start to look like a finished product! Not sure when thats going to happen!
Looking forward to seeing this project start to look like a finished product! Not sure when thats going to happen!
- CYBORG
- Moderator
- Posts: 24537
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: !983 Project-Started with watching to many car shows
Good luck with your project. If we can help in anyway, just ask
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
-
- Tin Member
- Posts: 10
- Joined: Sun Feb 12, 2017 4:46 pm
- Location: Cape Cod Massachusetts
Re: !983 Project-Started with watching to many car shows
Thanks all....I'm sure I will learn as I go. My touring ride is a 2011 Road Glide. This will be an 'around town' ride. The big surprise will be if it starts when I'm done!
- CYBORG
- Moderator
- Posts: 24537
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: !983 Project-Started with watching to many car shows
Pretty easy to get running. Just get a manual and follow the pictures
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
- 5speed
- Honored Life Member
- Posts: 5311
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: !983 Project-Started with watching to many car shows
I hear you about the reruns...
welcome to the site..these guys like lots of pics.
welcome to the site..these guys like lots of pics.
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
- Rat
- Photo Gallery Admin
- Posts: 15457
- Joined: Fri Oct 21, 2005 9:59 pm
- My Album: https://www.ngwclub.com/gallery/v/wingmans/rat/
- RIP: cookie
- Location: Toronto .... Canada
Re: !983 Project-Started with watching to many car shows
Welcome to the 'Wingdom.
Lots of onfo in 'Shop Talk'.
Gord
Lots of onfo in 'Shop Talk'.
Gord
"I'd rather Ride than Shine"
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
- Easter
- True Blue Steel Biker
- Posts: 2999
- Joined: Thu Sep 13, 2012 11:33 am
- Location: South of Houston 100 miles
Re: !983 Project-Started with watching to many car shows
It is reassuring to start with a running bike, but then there isn't as much suspense! And suspense is what keeps us up at night.
Bikes at present:
83 XL 600r with a 2004 XR650L engine
And a slightly worse for the wear BMW GS adventure bike awaiting repair
83 GL in process
83 XL 600r with a 2004 XR650L engine
And a slightly worse for the wear BMW GS adventure bike awaiting repair
83 GL in process
-
- Tin Member
- Posts: 10
- Joined: Sun Feb 12, 2017 4:46 pm
- Location: Cape Cod Massachusetts
Re: !983 Project-Started with watching to many car shows
The suspense for me is can I get it all back together again! Didn't take long to realize I needed to put parts/bolts, etc. in baggies and label them. also, tape wires and cables, writing what they are! Its all good though.
- Easter
- True Blue Steel Biker
- Posts: 2999
- Joined: Thu Sep 13, 2012 11:33 am
- Location: South of Houston 100 miles
Re: !983 Project-Started with watching to many car shows
My orange bike, Draggon Wing was the first project I had ever tried and it was all in pieces an boxes when I bought it. I had no clue what most of the parts were. Eventually you will get to the point you recognize every nut bolt and screw, but baggies are still nice.
Bikes at present:
83 XL 600r with a 2004 XR650L engine
And a slightly worse for the wear BMW GS adventure bike awaiting repair
83 GL in process
83 XL 600r with a 2004 XR650L engine
And a slightly worse for the wear BMW GS adventure bike awaiting repair
83 GL in process
- CYBORG
- Moderator
- Posts: 24537
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: !983 Project-Started with watching to many car shows
I agree. if you do it long enough, you just put it all in the same pile, and when you re assemble it, you know your done when the pile is goneEaster wrote:My orange bike, Draggon Wing was the first project I had ever tried and it was all in pieces an boxes when I bought it. I had no clue what most of the parts were. Eventually you will get to the point you recognize every nut bolt and screw, but baggies are still nice.
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
- Track T 2411
- Honored Life Member
- Posts: 8482
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: !983 Project-Started with watching to many car shows
When I try that, I inevitably end up with one bolt, screw, or the like that should have been installed 10 steps before!CYBORG wrote:I agree. if you do it long enough, you just put it all in the same pile, and when you re assemble it, you know your done when the pile is goneEaster wrote:My orange bike, Draggon Wing was the first project I had ever tried and it was all in pieces an boxes when I bought it. I had no clue what most of the parts were. Eventually you will get to the point you recognize every nut bolt and screw, but baggies are still nice.
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- CYBORG
- Moderator
- Posts: 24537
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: !983 Project-Started with watching to many car shows
Can't say that hasn't happened to me, but if yo do it long enough, and learn from those mistakes, it gets easier. I never have been one to cover my work bench, or floor, with plastic bags......but I DO understand those who do
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
-
- Similar Topics
- Replies
- Views
- Last post
-
- 40 Replies
- 2629 Views
-
Last post by MikeNTexas