MAKING A TRIKE
Moderators: Brant, Sagebrush, Forum Moderators
- Easter
- SUPER BIKER!!!!
- Posts: 3000
- Joined: Thu Sep 13, 2012 11:33 am
- Location: South of Houston 100 miles
Re: MAKING A TRIKE
If you are using the Dyna coils, you will not need to use it. Check that instruction sheet to be sure but I don't think so.
Bikes at present:
83 XL 600r with a 2004 XR650L engine
And a slightly worse for the wear BMW GS adventure bike awaiting repair
83 GL in process
83 XL 600r with a 2004 XR650L engine
And a slightly worse for the wear BMW GS adventure bike awaiting repair
83 GL in process
- transitman
- Titanium Member
- Posts: 495
- Joined: Sun Jul 22, 2012 12:08 am
- Location: UK
Re: MAKING A TRIKE
Thank you both, and another one bites the dust
"Say not the struggle naught availeth." A H Clough.
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
- transitman
- Titanium Member
- Posts: 495
- Joined: Sun Jul 22, 2012 12:08 am
- Location: UK
Re: MAKING A TRIKE
Lights are LEDs so will have to take care to do the earth first
This is the cabling for the rear lights, they come out under my seat.
And this is the other end, with the cables from the light unit coming in from a length of 15mm copper tube. Couldn't get them through the tubing.
This is the mobility trike hoist that will carry a small electric trike hanging on the back. Held on with 4 bolts.
Last pic, one of the two panniers, I think you call them sidebags, will be mounted here, held on with 2 metal straps.
That's about it for now, just had to go out and buy a bag of bolts and next week will take the second back wheel to be built up. May also get the cables made too, then I can finish the carbs.
"Say not the struggle naught availeth." A H Clough.
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
- wingrider
- SUPER BIKER!!!!
- Posts: 3738
- Joined: Thu May 24, 2012 12:15 pm
- Location: Maple Lake, MN USA
Re: MAKING A TRIKE
Coming Along nicely! Keep up the good work!
2002 1800 Wing
2001 Valkyrie Interstate
1978 1200 EFI Wing with Motorvation Coupe Royale sidecar
1977 1200 Wing cafe/bobber project
1974 Suzuki GT550
2001 Valkyrie Interstate
1978 1200 EFI Wing with Motorvation Coupe Royale sidecar
1977 1200 Wing cafe/bobber project
1974 Suzuki GT550
- transitman
- Titanium Member
- Posts: 495
- Joined: Sun Jul 22, 2012 12:08 am
- Location: UK
Re: MAKING A TRIKE
Thank you!
"Say not the struggle naught availeth." A H Clough.
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
- Old Fogey
- Honored Life Member
- Posts: 7704
- Joined: Mon Aug 27, 2007 11:31 pm
- Location: Glasgow, Scotland
- Contact:
Re: MAKING A TRIKE
Doing well, my friend! Neat idea on the hoist; I'm impressed.
"Impossible Is Just a Level of Difficulty!..."
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous!
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous!
- ericheath
- Honored Life Member
- Posts: 9581
- Joined: Wed Jul 29, 2009 11:20 am
- Location: Winnipeg, Manituba
Re: MAKING A TRIKE
So it's a six wheeler?
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
- Rat
- Photo Gallery Admin
- Posts: 15482
- Joined: Fri Oct 21, 2005 9:59 pm
- My Album: https://www.ngwclub.com/gallery/v/wingmans/rat/
- RIP: cookie
- Location: Toronto .... Canada
Re: MAKING A TRIKE
Nice to have a 'spare' ....good work ....
Gord
Gord
"I'd rather Ride than Shine"
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
- transitman
- Titanium Member
- Posts: 495
- Joined: Sun Jul 22, 2012 12:08 am
- Location: UK
Re: MAKING A TRIKE
Details, details
First pic shows detail of jockey shifter. 2 stepped bushes either side of the lever so the nut can be tight but leave the lever free
Next pic shows the gearbox selector end of the jockey shifter and the last pic shows it in side view.
At the moment the exhausts are loose and the shifter needs adjusting back as it is fouling both the pipe and the frame, but there is plenty of adjustment available.
The clutch is on top of the lever and shifts are quite a short throw with leverage I've given it.
This fairly useless pic shows the lever tightened up. Even if it is sideways. Shows it fits ok anyway
You can also see my home made exhaust nuts, nice and long for easy access and brass makes them non stick.
Doing quite a lot at the moment, weather warm, daylight long, couldn't be better really.
First pic shows detail of jockey shifter. 2 stepped bushes either side of the lever so the nut can be tight but leave the lever free
Next pic shows the gearbox selector end of the jockey shifter and the last pic shows it in side view.
At the moment the exhausts are loose and the shifter needs adjusting back as it is fouling both the pipe and the frame, but there is plenty of adjustment available.
The clutch is on top of the lever and shifts are quite a short throw with leverage I've given it.
This fairly useless pic shows the lever tightened up. Even if it is sideways. Shows it fits ok anyway
You can also see my home made exhaust nuts, nice and long for easy access and brass makes them non stick.
Doing quite a lot at the moment, weather warm, daylight long, couldn't be better really.
"Say not the struggle naught availeth." A H Clough.
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
- transitman
- Titanium Member
- Posts: 495
- Joined: Sun Jul 22, 2012 12:08 am
- Location: UK
Re: MAKING A TRIKE
Missed your post Eric, yes indeed a 6 wheeler!
"Say not the struggle naught availeth." A H Clough.
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
'78 GL1000 Trike
1st bike: '58 150cc Ambassador 2 stroke. learned how to chuck it down the road
'31 BSA 500 single long stroke Sloper, dug out of a wall in Sussex, never went that well...
'49 Sunbeam S8, built from bits in '67, used daily, sold to a US biker in '84, still miss it
3 BSA Bantams, now a daughter has one
'78 Honda 500T
- duke182
- SUPER BIKER!!!!
- Posts: 3375
- Joined: Mon Jul 05, 2010 11:33 pm
- My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
- Location: hope,ark
Re: MAKING A TRIKE
Every tome I check in im met with great inovation.
Im convinced this is going tobe outstanding when finished.
Keep up the awesome work!
Im convinced this is going tobe outstanding when finished.
Keep up the awesome work!
God bless those who protect our freedom, at every level
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
- Easter
- SUPER BIKER!!!!
- Posts: 3000
- Joined: Thu Sep 13, 2012 11:33 am
- Location: South of Houston 100 miles
Re: MAKING A TRIKE
To make a bad pun (in reference to your photo) you can see the daylight at the end of the tunnel now. Looking great.
Bikes at present:
83 XL 600r with a 2004 XR650L engine
And a slightly worse for the wear BMW GS adventure bike awaiting repair
83 GL in process
83 XL 600r with a 2004 XR650L engine
And a slightly worse for the wear BMW GS adventure bike awaiting repair
83 GL in process
- Rat
- Photo Gallery Admin
- Posts: 15482
- Joined: Fri Oct 21, 2005 9:59 pm
- My Album: https://www.ngwclub.com/gallery/v/wingmans/rat/
- RIP: cookie
- Location: Toronto .... Canada
Re: MAKING A TRIKE
Those brass exhaust studs could be a big seller ....
Gord
Gord
"I'd rather Ride than Shine"
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
-
- Tin Member
- Posts: 12
- Joined: Fri Jun 17, 2016 9:16 am
Re: MAKING A TRIKE
looking good
~SD
~SD
Last edited by Shadow Dreamer on Sat Jun 18, 2016 11:21 pm, edited 1 time in total.
- Easter
- SUPER BIKER!!!!
- Posts: 3000
- Joined: Thu Sep 13, 2012 11:33 am
- Location: South of Houston 100 miles
Re: MAKING A TRIKE
Shadow Dreamer,
Start a thread (after going through the preliminaries) and keep us up to date.
Welcome to the club.
I agree, transitman is an inspiration to us all.
Start a thread (after going through the preliminaries) and keep us up to date.
Welcome to the club.
I agree, transitman is an inspiration to us all.
Bikes at present:
83 XL 600r with a 2004 XR650L engine
And a slightly worse for the wear BMW GS adventure bike awaiting repair
83 GL in process
83 XL 600r with a 2004 XR650L engine
And a slightly worse for the wear BMW GS adventure bike awaiting repair
83 GL in process
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 534 Views
-
Last post by Rat