Pics at last!

A forum for stories, pics and updates of your resto's. Be it a barn find, Grampas hand me down or a bike being brought back to it's former glory.If you are restoring it, show us your stuff!

Moderators: Brant, Sagebrush, Forum Moderators

Post Reply
User avatar
Old Fogey
Honored Life Member
Honored Life Member
Posts: 7427
Joined: Mon Aug 27, 2007 11:31 pm
Location: Glasgow, Scotland
Contact:

Pics at last!

#1

Post by Old Fogey »

At long last I've got the camera and new PC working together.

Been a long nightmare! Don't ever use Kodak Software, it's the most unintuitive stuff I've use for a very long time and unfortunately I lost some of the pics while sorting it out.

Anyway, here's the start.
Image

Image

Image
"Impossible Is Just a Level of Difficulty!..."
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous! :-D
User avatar
Whiskerfish
President
President
Posts: 35287
Joined: Thu Feb 16, 2006 9:34 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
Location: Norfolk Va

#2

Post by Whiskerfish »

Looking good!! Nice job on the gages!!!
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!

Psst. oh and by the way CHANGE YOUR BELTS!!!!
User avatar
Old Fogey
Honored Life Member
Honored Life Member
Posts: 7427
Joined: Mon Aug 27, 2007 11:31 pm
Location: Glasgow, Scotland
Contact:

#3

Post by Old Fogey »

Just realised that this should have been in the new Restorations forum, if someone would like to move it, please.
"Impossible Is Just a Level of Difficulty!..."
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous! :-D
User avatar
Cookie
Honored Life Member
Honored Life Member
Posts: 15821
Joined: Thu Oct 25, 2007 11:37 pm
RIP: 1950-2011
Location: San Mateo, CA

#4

Post by Cookie »

Is that a factory shot of a new wing being assembled? How many hours did it take you to do the gauges? I will have to do something there when I get around to my red bike.
Enjoy life,
Cookie


A guy with two sidecars can't be all bad.
Owner of 4.4 76s and one lone 75 Wings (does a spare engine make .2?)
User avatar
mrflamewerks
Gold Member
Gold Member
Posts: 1047
Joined: Wed Sep 26, 2007 7:21 am
Location: West Puget Sound

#5

Post by mrflamewerks »

Excellent job especially the gage set. Did you do the gages, or did you farm them out?
The difference between Genius and Stupidity is that Genius has its limits.
> Unknown
He who sacrifices freedom for security deserves neither.
>B. Franklin
Image
78 GL1000 Pending Resurrection
78 GL1000 Naked (gone to pieces)
83 GL1100 Interstate
99 GL1500CF Valkyrie Interstate (Gone to the Darkside)
99 GL1500C Valkyrie Standard (Gone to the Darkside)
ElPiloto
True Blue Steel Biker
True Blue Steel Biker
Posts: 2085
Joined: Fri Apr 06, 2007 4:01 pm
Location: Southern Arizona

#6

Post by ElPiloto »

You're doing some great work there.

I have a Kodak digital and I just install the driver. Then when I plug the camera into the PC, the camera shows up as another drive.

Nice workshop too. You guys are lucky to have an enclosed garage or workshop.

Did you copy the guage faces on a scanner, invert the colors, then print them out on white paper? However you did the guages, they turned out great.
"Some Cats Got it, Some Cats Ain't"
User avatar
Old Fogey
Honored Life Member
Honored Life Member
Posts: 7427
Joined: Mon Aug 27, 2007 11:31 pm
Location: Glasgow, Scotland
Contact:

#7

Post by Old Fogey »

Well Cookie
You see, I have this problem.

When I was an apprentice engineer I had a journeyman, Bobby, of the old school, a real pernickety old git.
When one of the older apprentices was asked by him if he had done something right , the app replied ' near enough!'

He was asked again 'is it right?' and gave the same answer!

Again he was asked. This time he replied 'yes it's right!'

'OK' says Bobby, 'that's near enough!@'

Kind of sticks with you, that kind of training. :lol:

As for the gauges

the faces are Bob Howell's appliques and following his instructions they really take very little time. I reckon start to finish including cleaning all the crud out of them, greasing the mechanism, spraying the white ( the appliques are black on clear)( I use a white acrylic primer which dries in seconds) and reassembling them took maybe two hours apiece. Once the adhesive holding the parts together cured it probably ttok another hour to mask up the faces, rub down the cowl and spray the black.
I had jumped the gun and removed the chrome rings, using the method that WF put a link to some time ago , prizing them off before I got Bob's instructions.

That's why they are now painted :!:
"Impossible Is Just a Level of Difficulty!..."
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous! :-D
User avatar
prairiestar
Billet Alum. Member
Billet Alum. Member
Posts: 247
Joined: Fri Jul 21, 2006 7:10 pm
Location: Greeley, CO

#8

Post by prairiestar »

Nice! There is plenty of inspiration to be found here, almost daily.
If you are going through hell...keep on going.
1979 GL1000
2007 Black Hills Trip
User avatar
Old Fogey
Honored Life Member
Honored Life Member
Posts: 7427
Joined: Mon Aug 27, 2007 11:31 pm
Location: Glasgow, Scotland
Contact:

#9

Post by Old Fogey »

Has anyone spotted the (non)deliberate mistake in the gauge pic? Very noticeable once you see it!
"Impossible Is Just a Level of Difficulty!..."
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous! :-D
User avatar
roncar
Vice President
Vice President
Posts: 4879
Joined: Sat Jan 05, 2008 4:30 pm
My Album: http://www.ngwclub.com/gallery3/index.p ... s/roncarGL
Location: Lakeland, Florida

#10

Post by roncar »

Ya mean the tenth's of a mile wheel in the odometer being the same color as the whole mile wheels?
"I periodically misspell words just to annoy the word police."

Image
User avatar
Cookie
Honored Life Member
Honored Life Member
Posts: 15821
Joined: Thu Oct 25, 2007 11:37 pm
RIP: 1950-2011
Location: San Mateo, CA

#11

Post by Cookie »

Nope and I'm probably not likely to. Perhaps WF will, he's younger and smarter than I.
Enjoy life,
Cookie


A guy with two sidecars can't be all bad.
Owner of 4.4 76s and one lone 75 Wings (does a spare engine make .2?)
User avatar
Old Fogey
Honored Life Member
Honored Life Member
Posts: 7427
Joined: Mon Aug 27, 2007 11:31 pm
Location: Glasgow, Scotland
Contact:

#12

Post by Old Fogey »

roncar wrote:Ya mean the tenth's of a mile wheel in the odometer being the same color as the whole mile wheels?
You're too good!

I'd forgotten I had to do this, so add another three hours to the speedo time.

Yeah, the white wheel had discoloured real bad, almost orange! So I cleaned it! :oops:

Cleaned it so well it didn't have any numbers on it! That plastic doesn't just discolour on the top, it goes right into it.
Tried repainting it white, NoNoNo! Horrible!

I had an old speedo with the same prob so, what the hell, fit a black one. At least it's different :roll:

Let me tell you, that is not something you would ever want to do by choice :shock:
"Impossible Is Just a Level of Difficulty!..."
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous! :-D
User avatar
Cookie
Honored Life Member
Honored Life Member
Posts: 15821
Joined: Thu Oct 25, 2007 11:37 pm
RIP: 1950-2011
Location: San Mateo, CA

#13

Post by Cookie »

I never would have noticed that. It just looks like the tenths are delineated.
Enjoy life,
Cookie


A guy with two sidecars can't be all bad.
Owner of 4.4 76s and one lone 75 Wings (does a spare engine make .2?)
User avatar
Brant
Board of Directors
Board of Directors
Posts: 10059
Joined: Fri Mar 25, 2005 11:31 am
My Album: http://www.ngwclub.com/gallery/v/wingmans/brant/
Location: Hastings, Nebraska, USA

#14

Post by Brant »

Thats looks like some very painstaking work. If the whole turns out like those bits, it will be outstanding!
83 GL 1100 bagger
78 GL 1000 naked
ALL WE WANT TO DO IS DRINK OUR ESPRESSO, RIDE OUR MACHINES, AND NOT BE HASSLED BY THE MAN
Owning a motorcycle is not a matter of life or death. It's much more important than that.
"Don't sweat the little things, guys, take care and appreciate all that you have around you!" - Fewman
NGWclub on Facebook
User avatar
octane
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3763
Joined: Sat Jun 11, 2005 3:24 pm
Location: Denmark

#15

Post by octane »

Great pics!
Keep'em coming.



Old Fogey wrote:Just realised that this should have been in the new Restorations forum, if someone would like to move it, please.
Done.
Post Reply

Return to “Members Restorations and Projects”