Page 8 of 12

Re: CROSS OVER PARTS LIST

Posted: Wed Aug 07, 2013 1:06 pm
by Toehead
Crank seal, GL1000 and GL1100:

Timken P/N 223542
National P/N 223542

Used as a : 1993 infinity J30 rear differential seal

The Timken is easier to install, as it is tapered so it self centers. The national is not tapered. The Timken is cheaper as well.

About 7$ at autozone/advanced auto/etc

Re: CROSS OVER PARTS LIST

Posted: Thu Aug 08, 2013 8:53 am
by Roady
Thanks Toehead. It's been added to the list.

Re: CROSS OVER PARTS LIST

Posted: Thu Oct 24, 2013 2:58 pm
by Nohands
I found this list of stearing head bearing sizes and X-over front end referance.

http://scandalon.com/2009/06/motorcycle ... ize-chart/

Re: CROSS OVER PARTS LIST

Posted: Thu Oct 24, 2013 3:43 pm
by 82aspy
BIG T wrote:this sticky is to list tried and true cross over parts. like parts from other Hondas and other sources that will cross over to our gl bikes. even if it is a year crossover, you can list it here. I know that Frenchy and Randak probably have a partial list they themselves use. lets build this one....T :?: :?: :?: :?: :?:
does this list include suitable parts that require a slight mod?

like here Adapting Rear Master Cylinder from GL1800 to GL1100

Re: CROSS OVER PARTS LIST

Posted: Thu Oct 24, 2013 4:46 pm
by robin1731
82aspy wrote:
BIG T wrote:this sticky is to list tried and true cross over parts. like parts from other Hondas and other sources that will cross over to our gl bikes. even if it is a year crossover, you can list it here. I know that Frenchy and Randak probably have a partial list they themselves use. lets build this one....T :?: :?: :?: :?: :?:
does this list include suitable parts that require a slight mod?

like here Adapting Rear Master Cylinder from GL1800 to GL1100

This is really a list of bolt on cross over parts. Like for car parts that are a direct fit. If it needs modifying to fit it isn't a crossover. It's usable. IMO

Re: CROSS OVER PARTS LIST

Posted: Fri Oct 25, 2013 6:26 am
by Roady
Nohands wrote:I found this list of stearing head bearing sizes and X-over front end referance.

http://scandalon.com/2009/06/motorcycle ... ize-chart/
These are the ones from that list that apply to GL's.

Upper: 26 x 48.5 x 15.2
Lower: 30 x 50 x 14.4

Honda GL1000 (75-76)
Honda GL1000L* (76)

Upper: 25 x 47 x 15
Lower: 30 x 55 x 17

Honda GL1000 (77-79)

Upper: 26 x 47 x 15
Lower: 30 x 55 x 17

Honda GL1100 (80-83), GL1100C/AC/DC/IC*, GL1100D2D/AD/A/IA/DA*, GL1100RB/RC/D/ID/DD*
Honda GL1200 (84-87)
Honda GL1500 (88-91)
Honda GL1500 AP-AR (93-94)

* - Do you know what these suffixes mean?
robin1731 wrote:
82aspy wrote:does this list include suitable parts that require a slight mod?

like here Adapting Rear Master Cylinder from GL1800 to GL1100
This is really a list of bolt on cross over parts. Like for car parts that are a direct fit. If it needs modifying to fit it isn't a crossover. It's usable. IMO
I agree with Robin. But, that one is worth saving so I've moved it to this Parts Reference forum.

Re: CROSS OVER PARTS LIST

Posted: Fri Oct 25, 2013 6:55 am
by 82aspy
i'm not familiar with the parts reference forum but suggest making it clear the rear m/c mod is untested for the 83 gl1100 linked setup, at least the way i'm reading the thread,

however, prob wouldn't be hard to find a closer matched m/c, as far as piston size goes, with the same mod

if required for the 83 linked brakes
Roady wrote:
robin1731 wrote:
82aspy wrote:does this list include suitable parts that require a slight mod?

like here Adapting Rear Master Cylinder from GL1800 to GL1100
This is really a list of bolt on cross over parts. Like for car parts that are a direct fit. If it needs modifying to fit it isn't a crossover. It's usable. IMO
I agree with Robin. But, that one is worth saving so I've moved it to this Parts Reference forum.

Re: CROSS OVER PARTS LIST

Posted: Fri Oct 25, 2013 7:24 am
by Roady
82aspy wrote:i'm not familiar with the parts reference forum ...
It's just a "branch" off the Technical forums "tree" .... here. Take a look at the Board Index.

(Note to self: A drawing of the whole tree would be helpful ... someday. :orange )

Re: CROSS OVER PARTS LIST

Posted: Wed Nov 06, 2013 4:24 pm
by SJBikesaws
Large O ring for oil filter housing on GL1100 GL1000 and GL1200

Napa Balkamp # 727-2340

Dumped the oil for a quicky change on Friday, and the 0 ring on my filter housing was in pretty bad shape. Napa had this one on the shelf and it fit perfectly, so I got to ride,,,YAY!!!!

Yea, I know, buy a new filter, but I didn't have one and had a few miles built up on the oil. The stealership didn't have a filter in stock.

Re: CROSS OVER PARTS LIST

Posted: Thu Nov 07, 2013 7:36 am
by Roady
NAPA usually stocks filters.

Re: CROSS OVER PARTS LIST

Posted: Thu Nov 07, 2013 8:30 am
by CYBORG
Autozone and advance auto usually have them as well

Re: CROSS OVER PARTS LIST

Posted: Thu Nov 07, 2013 10:46 am
by robin1731
And Oreilly's.

Re: CROSS OVER PARTS LIST

Posted: Fri Nov 08, 2013 8:05 am
by Roady
Et cetera, et cetera, et cetera.
Image

Oil Filter - GL1000, GL1100 & GL1200
  • Honda Part #15410-426-010, 15410-422-004
    AMSOil SMF-101
    FRAM #CH6009 (comes with both o-rings)
    K&N KN401
    Napa #PS4940
    Purolator #ML16809
    STP SMO-09
    WIX #24940

Re: CROSS OVER PARTS LIST

Posted: Fri Nov 08, 2013 2:08 pm
by taylorsel
We are a bunch of old guys if we got that reference :-D

Re: CROSS OVER PARTS LIST

Posted: Tue Nov 26, 2013 8:40 pm
by OfcZ
Does anyone know if any other years would fit an 83 GL I 1100 for the lower fairing cowls?