Timing belts

cross over parts from other wings, hondas, or any other parts sources that can be used on our wings.

Moderators: robin1731, Rat, Forum Moderators

Post Reply
UK_Andy
Titanium Member
Titanium Member
Posts: 430
Joined: Sat Aug 15, 2015 5:55 pm
Location: Surrey. UK

Timing belts

#1

Post by UK_Andy »

The part numbers for these belts are different in the UK

GL1000 & GL1100 (requires 2)
Honda part #14400-371-04/14400-371-14
Gates #T274
NAPA #250274
Goodyear Gatorback #40274 (AutoZone & others)

Can anyone say what car they are for and the I can get UK ones.

Or if I can dimensions and number of teeth i can find out as well
User avatar
ericheath
Honored Life Member
Honored Life Member
Posts: 9580
Joined: Wed Jul 29, 2009 11:20 am
Location: Winnipeg, Manituba

Re: Timing belts

#2

Post by ericheath »

Honda Affinity is coming to mind, but I think that was for the 1200.
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
UK_Andy
Titanium Member
Titanium Member
Posts: 430
Joined: Sat Aug 15, 2015 5:55 pm
Location: Surrey. UK

Re: Timing belts

#3

Post by UK_Andy »

Bump, anyone please have more info?
User avatar
roncar
Vice President
Vice President
Posts: 4856
Joined: Sat Jan 05, 2008 4:30 pm
My Album: http://www.ngwclub.com/gallery3/index.p ... s/roncarGL
Location: Lakeland, Florida

Re: Timing belts

#4

Post by roncar »

One of the numbers I've seen in the forums is the Gates 5119 (available only in Europe?) This link gives some other manufactures and part numbers (I'm not familiar with any of them.) http://boodmo.com/catalog/part-timing_belt-1448330/#
"I periodically misspell words just to annoy the word police."

Image
User avatar
CYBORG
Moderator
Moderator
Posts: 24536
Joined: Mon Jan 14, 2008 12:52 pm
Location: Muskegon mich

Re: Timing belts

#5

Post by CYBORG »

I have to wonder why the European number would be different for the same part
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
UK_Andy
Titanium Member
Titanium Member
Posts: 430
Joined: Sat Aug 15, 2015 5:55 pm
Location: Surrey. UK

Re: Timing belts

#6

Post by UK_Andy »

Thanks, if someone can just confirm 87 teeth and 19mm wide I may be able to add some info to the crossover list.
Trophyvictor
Brass Member
Brass Member
Posts: 31
Joined: Mon May 11, 2020 11:16 pm

Re: Timing belts

#7

Post by Trophyvictor »

So... I'm having problems finding the belts here in Belgium... Apparently neither the US reference, neither the 5119 can be used...

Would anyone have any more info or a picture of an actual belt with the number part from gates or other brand?

Thanks in advance
User avatar
gltriker
Honored Life Member
Honored Life Member
Posts: 5053
Joined: Fri Sep 24, 2010 9:11 pm
Location: central NY State

Re: Timing belts

#8

Post by gltriker »

Which model are you trying to get timing belts for?
Cliff (74yrs ;) )

Keep your eyes and ears open and you'll learn something new, everyday. tumb2

New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^ :oldies

RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi tumb2
"Can't see the paint when your looking thru the handlebars..........." -Oldewing ;)
"I'd rather Ride than Shine" -RAT tumb2 Me Too!!

Cliff

'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM :shock: https://nakedgoldwingsclub.com/forum/page/Welcome

previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
User avatar
Liam
True Blue Steel Biker
True Blue Steel Biker
Posts: 2066
Joined: Sun Jan 06, 2013 11:23 am
Location: Ireland

Re: Timing belts

#9

Post by Liam »

The belts you need are sold for a Honda TN Acty 0.6 litre from 79-87.
Gates 5119 do an ebay search you will find many sellers.

Germany: https://www.ebay.com/itm/Gates-Zahnriem ... #vi-ilComp
UK: https://www.ebay.co.uk/itm/Timing-Belt- ... SwpIBejCWS
User avatar
Liam
True Blue Steel Biker
True Blue Steel Biker
Posts: 2066
Joined: Sun Jan 06, 2013 11:23 am
Location: Ireland

Re: Timing belts

#10

Post by Liam »

I never actually saw one of these, I don't think they were ever sold here. Kinda ugly cute, definitely not built for the full sized man.
honda_acty_van_sdx_special_1.jpg
honda_acty_van_sdx_special_1.jpg (77.85 KiB) Viewed 1202 times
honda_tn-acty_std.jpg
honda_tn-acty_std.jpg (53.07 KiB) Viewed 1202 times
User avatar
pidjones
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3237
Joined: Wed May 22, 2013 4:06 pm
Location: East TN

Re: Timing belts

#11

Post by pidjones »

For a GL1000, I use a Gates T274. I buy them on Amazon for the best price.
"Love 'em all.... let God sort 'em out!"
Ex 2006 GL1800 - the Black Pearl SOLD! to make room for:
2021 Can-Am Spyder RT Limited Dark Chalk Metallic
1975 Red GL1000 project - ex Pistol Pete project
1972 Triumph T150V Trident rescue - finished and FOR SALE!
1976 Yamaha RD400c
1978 GL1000 with '75 engine - the Hunley
Ex 1978 GL1000
Ex 1979 GL1000
Ex '79 CB750F rat bike
Ex '86 SEi
Ex '77 GL1000
Ex '76 RD400
Ex '72 Penton 125 set up for flat track
Ex '73 RD250
Ex '68 TR6C - chopped
User avatar
Liam
True Blue Steel Biker
True Blue Steel Biker
Posts: 2066
Joined: Sun Jan 06, 2013 11:23 am
Location: Ireland

Re: Timing belts

#12

Post by Liam »

pidjones wrote:For a GL1000, I use a Gates T274. I buy them on Amazon for the best price.
Problem is that if you search for gates T274 in Europe you wont find them. That's where this 5119 number comes from, which is also a gates number. Goodness knows why they have different numbers for the same thing in different areas.
User avatar
motoxcz
Rusty Probie
Rusty Probie
Posts: 1
Joined: Fri Aug 07, 2020 7:45 pm
Location: Melbourne Victoria Australia

Re: Timing belts

#13

Post by motoxcz »

In Australia the Gates code for GL1000 and 1100 timing belts is T916.

I hate to think why the same company has different internal part numbers for the same product worldwide!
1975 GL1000
User avatar
desertrefugee
SUPER BIKER!!!!
SUPER BIKER!!!!
Posts: 3947
Joined: Fri Nov 11, 2011 9:33 pm
Location: Chandler, AZ, USA

Re: Timing belts

#14

Post by desertrefugee »

Liam wrote:I never actually saw one of these, I don't think they were ever sold here. Kinda ugly cute, definitely not built for the full sized man.

honda_acty_van_sdx_special_1.jpg

honda_tn-acty_std.jpg
lolol lolol

Man oh man do I wish I had Photoshop talents. I just had this crazy visual of a “full-sized” Liam at the wheel of one of those things. I’m sorry Liam, but that was a funny, funny visual you gave me!
- Life is not about waiting for the storms to pass. It's about learning to ride in the rain.
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Parts Reference Forum”