will gl1200 forks fit a 78 gl1000?

cross over parts from other wings, hondas, or any other parts sources that can be used on our wings.

Moderators: robin1731, Rat, Forum Moderators

Post Reply
User avatar
baci
Chrome Member
Chrome Member
Posts: 135
Joined: Fri Apr 20, 2007 11:01 am
My Album: http://www.ngwclub.com/gallery/baci

will gl1200 forks fit a 78 gl1000?

#1

Post by baci »

Any one ever swap these in? Need a new tree?
Baci, RoninMC
"Ride...Ronin, RIDE!"
78 gl1000 daily rider
'79 Vespa P200E project scoot
User avatar
Whiskerfish
President
President
Posts: 36943
Joined: Thu Feb 16, 2006 9:34 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
Location: Norfolk Va

Re: will gl1200 forks fit a 78 gl1000?

#2

Post by Whiskerfish »

the tubes are bigger in diameter so it is not a direct cross. Will require new trees.
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike

Psst. oh and by the way CHANGE YOUR BELTS!!!!
A Wing and a Chair
Lead Member
Lead Member
Posts: 5
Joined: Tue Jul 07, 2009 9:54 pm

Re: will gl1200 forks fit a 78 gl1000?

#3

Post by A Wing and a Chair »

I have gl 1200 forks on my 81 gl1100. I used 1500 fork tubes and lower clamp, 1200 top clamp, 1100 stem, 1100 fender, 1200 fender brackets, 1200 legs rim and brakes, 1500 progressive springs, I used these parts because I had them here but I believe the 1200 lower clamp and stem would fit. Doing this on a 1000, The stem and bearings would be the part that may have to be changed.
Attachments
12-12-11_1417.jpg
12-12-11_1417.jpg (65.08 KiB) Viewed 545 times
Doug McCracken
User avatar
ericheath
Honored Life Member
Honored Life Member
Posts: 9581
Joined: Wed Jul 29, 2009 11:20 am
Location: Winnipeg, Manituba

Re: will gl1200 forks fit a 78 gl1000?

#4

Post by ericheath »

Holy multi-cultural Goldwing!!!!.
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Parts Reference Forum”