Carb Felts

cross over parts from other wings, hondas, or any other parts sources that can be used on our wings.

Moderators: robin1731, Rat, Forum Moderators

Post Reply
User avatar
Whiskerfish
President
President
Posts: 36852
Joined: Thu Feb 16, 2006 9:34 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
Location: Norfolk Va

Carb Felts

#1

Post by Whiskerfish »

"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
2008 GL1800 IIIA "TH3DOG"
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!

Psst. oh and by the way CHANGE YOUR BELTS!!!!
bikerdad5
Cast Iron Member
Cast Iron Member
Posts: 72
Joined: Tue Aug 28, 2012 12:46 pm
Location: nd

Re: Carb Felts

#2

Post by bikerdad5 »

at 5$ each? no thanks
Why should I press one for English?
1977 GL1000 basket case/resurrection project.
User avatar
Wingingit2
Billet Alum. Member
Billet Alum. Member
Posts: 223
Joined: Tue Mar 07, 2006 8:25 pm
Location: Hereford, AZ. 85615
Contact:

Re: Carb Felts

#3

Post by Wingingit2 »

I have them made special. $1.50 each.

Glenn Blohm
Falcon Services
520 508-5958
Glenn & Anne
Lady Luck Prefers the Prepared
Album http://www.ngwclub.com/gallery/v/wingmans/album104/

It's Naked, and it's Modified


75' GL1000 (Project) I'm keeping this one
75' GL1000 (Project)-{with a 77' frame}
04' GL1800 (Sold)
08' Triumph Bonnie Black (sold)
ETC.
User avatar
Old Fogey
Honored Life Member
Honored Life Member
Posts: 7702
Joined: Mon Aug 27, 2007 11:31 pm
Location: Glasgow, Scotland
Contact:

Re: Carb Felts

#4

Post by Old Fogey »

I make my own (when I haven't run out of felt :oops: )
"Impossible Is Just a Level of Difficulty!..."
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous! :-D
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Parts Reference Forum”