dash bulb

cross over parts from other wings, hondas, or any other parts sources that can be used on our wings.

Moderators: robin1731, RAT, Forum Moderators

mickeyc
Zinc Member
Zinc Member
Posts: 39
Joined: Mon Feb 15, 2010 10:17 am
Location: enville,tn

dash bulb

Post #1 by mickeyc » Mon May 17, 2010 4:36 pm

Does anyone have a cross over for the dash bulbs? :-?

mickeyc
Zinc Member
Zinc Member
Posts: 39
Joined: Mon Feb 15, 2010 10:17 am
Location: enville,tn

Re: dash bulb

Post #2 by mickeyc » Mon May 17, 2010 4:36 pm

Sorry it for a 75 gl1000!

User avatar
Whiskerfish
President
President
Posts: 31053
Joined: Thu Feb 16, 2006 9:34 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
Location: Norfolk Va

Re: dash bulb

Post #3 by Whiskerfish » Thu May 20, 2010 7:46 am

I have seen it but I can not remember where? Did you try any searches?
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
and a whole garage full of possibilities!!

Psst. oh and by the way CHANGE YOUR BELTS!!!!

User avatar
Old Fogey
Honored Life Member
Honored Life Member
Posts: 6942
Joined: Mon Aug 27, 2007 11:31 pm
Location: Glasgow, Scotland
Contact:

Re: dash bulb

Post #4 by Old Fogey » Thu May 20, 2010 9:23 am

They are just standard BA9s
"Impossible Is Just a Level of Difficulty!..."
If I'd wanted you to understand, I would have explained it better! (Johann Cruyff)
I’d give my right arm to be ambidextrous! :-D

( Seriously, you haven't read all 115 pages of my http://www.wingovations.com website ?? :shock: )

User avatar
ke4cap
Silver Member
Silver Member
Posts: 604
Joined: Thu May 15, 2008 3:00 pm
Location: Lawrenceburg, TN

Re: dash bulb

Post #5 by ke4cap » Thu May 20, 2010 12:57 pm

Sylvania #1445 is what is mentioned on Randakk's site. I used them. They work!
Smiz
___________________________________
1977 GL1000
1973 CT90
Once upon a time, but no longer: 1998 GL1500, 1974 Kaw 900Z1, 1971 SL100, 1972 CB750, 1972 CB500, 1966 150 Dream

User avatar
CRAFTMAN6001
Chrome Member
Chrome Member
Posts: 170
Joined: Wed Jan 29, 2014 6:26 pm
Location: FLORIDA

Re: dash bulb

Post #6 by CRAFTMAN6001 » Sun Mar 08, 2015 12:46 am

mickeyc wrote:Does anyone have a cross over for the dash bulbs? :-?



https://www.superbrightleds.com/moreinf ... ower/2077/
You do not have the required permissions to view the files attached to this post.
1978 GL1000 01/77 GL1E-4011648 Factory /
GL1E-4115753
GL1E-4055247
VETTER PACKAGE 21-2523571 36-240270
Vetter 13-108977 Lowers

User avatar
gregforesi
Honored Life Member
Honored Life Member
Posts: 4800
Joined: Wed Jun 10, 2009 8:42 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/Greg+Foresi/
Location: Venice, FL

Re: dash bulb

Post #7 by gregforesi » Sun Mar 08, 2015 9:55 am

BA9 conventional bulbs or BA9-5SMD for the LED's. I couldn't get the LED's to work in the neutral or turn indicator circuits (probably because other things use those circuits). The high beam indicator and oil light aren't on enough to bother with.
The BA9 incandescent bulbs are rated at 7 watts and the LED's are about a 1 watt draw so your stator will see some power savings as well.
2006 GL1800 (Brutus Maximus)
1978 GL1000 (White Trash - 2012 BOTY
(If you want to discuss the Trashmobile, Webers, Rearsets, Clubmans, or other stuff then send me a PM. I have no idea what happened to the url's and it just doesn't matter.)
Hey Moe, half these nails have the heads on the wrong end!
You dummy. Those are for the other wall.

User avatar
CRAFTMAN6001
Chrome Member
Chrome Member
Posts: 170
Joined: Wed Jan 29, 2014 6:26 pm
Location: FLORIDA

Re: dash bulb

Post #8 by CRAFTMAN6001 » Sun Mar 08, 2015 11:41 am

gregforesi wrote:BA9 conventional bulbs or BA9-5SMD for the LED's. I couldn't get the LED's to work in the neutral or turn indicator circuits (probably because other things use those circuits). The high beam indicator and oil light aren't on enough to bother with.
The BA9 incandescent bulbs are rated at 7 watts and the LED's are about a 1 watt draw so your stator will see some power savings as well.

I hear you there. I should have been more detailed to what bulbs I replaced. Just the gauges bulbs. x5. I have the signal lamps (dash) to do yet. Guess I could use the extra bulbs there. I have a handful of them. Super Bright LEDs will do a refund and either put it to getting what I want. But I'm not one to play with shipping and refunds. I'll use them.
1978 GL1000 01/77 GL1E-4011648 Factory /
GL1E-4115753
GL1E-4055247
VETTER PACKAGE 21-2523571 36-240270
Vetter 13-108977 Lowers

User avatar
rcmatt007
Treasurer
Treasurer
Posts: 27427
Joined: Fri Oct 21, 2005 12:48 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/rcmatt007/
Location: New River Valley, Virginia

Re: dash bulb

Post #9 by rcmatt007 » Fri Jul 17, 2015 11:04 am

I use LEDS from superbright. GET THE ONES THAT HAVE THE WIDEST ANGLE (which are usually the brightest) LED lights can be very unidirectional which don't work well in the gauges
-Rodger-
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, carbs on the bench
76 Ltd "cookies bike" not ready for prime time,
79 project, finished,
'86 1200 (Beth's) with motorvation sidecar, July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's). I guess you can say we have MBS
http://www.ngwclub.com/forum/viewtopic.php?f=30&t=35846


Return to “Parts Reference Forum”

Who is online

Users browsing this forum: No registered users and 1 guest