Page 1 of 1
Starter Solenoid with built-in blade fuse holder
Posted: Thu Aug 27, 2009 7:11 pm
by stuka151
Just an FYI, I had to replace the solenoid on my 1100 recently and found a replacement with a built-in blade fuse holder to replace the dog bone style 30A Honda main fuse. It was made by Rick's Motorsport Electrics. Cost is about $40.
Posted: Thu Aug 27, 2009 9:06 pm
by starket
Have you got a link or at least a pic.
Posted: Thu Aug 27, 2009 10:27 pm
by stuka151
http://www.ricksmotorsportelectrics.com/
http://www.denniskirk.com/jsp/product_c ... myId=12477
Rick's lists:
PN:65-101 for the 1000 and
PN:65-102 for the 1100
This image is heisted from Dennis Kirk's website, kind of a lousy pic though. It just says "available in 8 variations" I can probably post a picture of mine tomorrow. I may also call Rick's to verify that the solenoid for the 1000 also has this feature as I have only personally seen the one for the 1100. Stay tuned.
Re: Starter Solenoid with built-in blade fuse holder
Posted: Tue May 12, 2015 9:48 pm
by BlueThunder
A starter solenoid from a Honda CBR fits nicely into a GL1000 spot. Can be found easily and inexpensively on eBay.
