7V Regulator

cross over parts from other wings, hondas, or any other parts sources that can be used on our wings.

Moderators: robin1731, Rat, Forum Moderators

Post Reply
User avatar
purplegoldwing
Billet Alum. Member
Billet Alum. Member
Posts: 222
Joined: Thu May 01, 2008 11:09 pm
Location: Rio Rancho, New Mexico

7V Regulator

#1

Post by purplegoldwing »

Here is another option for a 7V regulator that is working for me. I have about 300 miles on this now so far with no problems.

It is from Dimension Engineering. I just velcroed it in place.
I purchased their breakout board to mount it on. Makes wiring it in easier.

Image



http://www.dimensionengineering.com/DE-SWADJ.htm

Image
Bill
Naked custom 78 GL1000
1984 GL1200 Aspencade
2003 BMW K1200RS (for sale)
1985 GL1200 project: conversion to semi-standard
Pictures at:
http://www.flickr.com/photos/hubbell

Follow your heart, not the crowd!
User avatar
sunnbobb
Facebook Admin
Facebook Admin
Posts: 21272
Joined: Thu Jan 10, 2008 4:09 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
Location: LaConner, WA

#2

Post by sunnbobb »

OK, i need an explanation...
I found the end of the internet

---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!

1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
User avatar
purplegoldwing
Billet Alum. Member
Billet Alum. Member
Posts: 222
Joined: Thu May 01, 2008 11:09 pm
Location: Rio Rancho, New Mexico

#3

Post by purplegoldwing »

This replaced the 7 volt gauge regulator on my GL1000. The fuel and temperature gauges use 7 VDC instead of 12VDC to insure accuracy and stability. That way the gauges always have a constant voltage instead of fluctuating with battery voltage. Otherwise the gauges would typically drop at idle when the stator voltage dropped.

Uses three wires just like the original. Just have to wire it in directly instead of using the original plug. Just has three wires, battery voltage, ground and the output to the gauges.

This is mounted behind the left door/panel of the fake tank.
Bill
Naked custom 78 GL1000
1984 GL1200 Aspencade
2003 BMW K1200RS (for sale)
1985 GL1200 project: conversion to semi-standard
Pictures at:
http://www.flickr.com/photos/hubbell

Follow your heart, not the crowd!
User avatar
purplegoldwing
Billet Alum. Member
Billet Alum. Member
Posts: 222
Joined: Thu May 01, 2008 11:09 pm
Location: Rio Rancho, New Mexico

#4

Post by purplegoldwing »

Here is a picture of it in place. Note the high tech Velcro mount.

Image
Bill
Naked custom 78 GL1000
1984 GL1200 Aspencade
2003 BMW K1200RS (for sale)
1985 GL1200 project: conversion to semi-standard
Pictures at:
http://www.flickr.com/photos/hubbell

Follow your heart, not the crowd!
User avatar
sunnbobb
Facebook Admin
Facebook Admin
Posts: 21272
Joined: Thu Jan 10, 2008 4:09 pm
My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
Location: LaConner, WA

#5

Post by sunnbobb »

What is the picture in the upper right showing the regulator mounted on a board next to something?
I found the end of the internet

---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!

1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
User avatar
FirstYearDeek
True Blue Steel Biker
True Blue Steel Biker
Posts: 2543
Joined: Sun Aug 10, 2008 4:41 pm
Location: Terre Haute, Indiana

#6

Post by FirstYearDeek »

Top left, first post is the finished package. Top right is the transistor they use, then the transistor on the board with the other components required to adjust the voltage.

Middle left and right are different views of the finished package.

Bottom left is a "breakout" board with a (very funky) 3-pole socket for the transistor. Bottom right is the package in the socket for a finished product that's easy to wire.

It's all a little "un-engineered" for me, but I like to pot stuff and would probably find a way to water-cool it or something!

-Deek
"Eat, drink and be merry. For tomorrow we die."

1975 GL 1000 (First Year) under the knife; soon to be a cafe' inspired "Boss" of a freedom machine.
User avatar
purplegoldwing
Billet Alum. Member
Billet Alum. Member
Posts: 222
Joined: Thu May 01, 2008 11:09 pm
Location: Rio Rancho, New Mexico

#7

Post by purplegoldwing »

keeping it simple keeps the cost down, the regulator is only $15
Bill
Naked custom 78 GL1000
1984 GL1200 Aspencade
2003 BMW K1200RS (for sale)
1985 GL1200 project: conversion to semi-standard
Pictures at:
http://www.flickr.com/photos/hubbell

Follow your heart, not the crowd!
User avatar
hiddenone
Titanium Member
Titanium Member
Posts: 330
Joined: Thu Jul 17, 2008 12:20 pm
Location: eugene,or

#8

Post by hiddenone »

thanks for the info! :-D
"Our true enemies, as well as our true sources of strength, lie within."
--Willaru Huayta, QUECHUA NATION, PERU
2-76 gl1000's
1-76 gl1000 LTD
1-parts 75 gl1000
User avatar
Cookie
Honored Life Member
Honored Life Member
Posts: 15821
Joined: Thu Oct 25, 2007 11:37 pm
RIP: 1950-2011
Location: San Mateo, CA

#9

Post by Cookie »

It looks like a tough little unit.
Enjoy life,
Cookie


A guy with two sidecars can't be all bad.
Owner of 4.4 76s and one lone 75 Wings (does a spare engine make .2?)
User avatar
hallcm83
Chrome Member
Chrome Member
Posts: 111
Joined: Sun Apr 26, 2009 11:03 pm
Location: Tyler, Tx

#10

Post by hallcm83 »

going to have to try that on mine finicky temp readings and gas gauge is way too inconsistant
Christopher Hall GL1000 77' " Sgt. Fury"
http://www.nakedgoldwings.com/gallery/v/wingmans/hallcm83/
Gl1000 78 "Project Mayhem" is underway just picked her up pictures to follow
User avatar
purplegoldwing
Billet Alum. Member
Billet Alum. Member
Posts: 222
Joined: Thu May 01, 2008 11:09 pm
Location: Rio Rancho, New Mexico

#11

Post by purplegoldwing »

It's been installed for awhile now and is still working. Noticed you are from Tyler Texas, I used to live there back in the late 70's. Is it still called the Rose Capital?
Bill
Naked custom 78 GL1000
1984 GL1200 Aspencade
2003 BMW K1200RS (for sale)
1985 GL1200 project: conversion to semi-standard
Pictures at:
http://www.flickr.com/photos/hubbell

Follow your heart, not the crowd!
User avatar
hallcm83
Chrome Member
Chrome Member
Posts: 111
Joined: Sun Apr 26, 2009 11:03 pm
Location: Tyler, Tx

#12

Post by hallcm83 »

Oh yeah still the Rose Capital it has gotten alot bigger but there are some great rides along this part of Texas.
Christopher Hall GL1000 77' " Sgt. Fury"
http://www.nakedgoldwings.com/gallery/v/wingmans/hallcm83/
Gl1000 78 "Project Mayhem" is underway just picked her up pictures to follow
User avatar
Mike Toon
Zinc Member
Zinc Member
Posts: 39
Joined: Thu Feb 14, 2008 2:09 pm
Location: Burbank CA

#13

Post by Mike Toon »

Satisfied it worked, I gutted the old regulator and used epoxy putty to fill and hold things together. Installed back in stock place.

I had the parts, but bought at Radio Shack, about $3.00

Image
Current Bikes
1981 GL1100 Naked
2004 KLR650
1988 KLR650
2001 DR650
1997 DR350
1984 XL350
2002 CB919
User avatar
purplegoldwing
Billet Alum. Member
Billet Alum. Member
Posts: 222
Joined: Thu May 01, 2008 11:09 pm
Location: Rio Rancho, New Mexico

#14

Post by purplegoldwing »

How did you get the old epoxy out? I tried that and destroyed the case.
That old epoxy is hard!
Bill
Naked custom 78 GL1000
1984 GL1200 Aspencade
2003 BMW K1200RS (for sale)
1985 GL1200 project: conversion to semi-standard
Pictures at:
http://www.flickr.com/photos/hubbell

Follow your heart, not the crowd!
User avatar
Mike Toon
Zinc Member
Zinc Member
Posts: 39
Joined: Thu Feb 14, 2008 2:09 pm
Location: Burbank CA

#15

Post by Mike Toon »

Drill press, drill press vice, gloves and a lot of patience.
Current Bikes
1981 GL1100 Naked
2004 KLR650
1988 KLR650
2001 DR650
1997 DR350
1984 XL350
2002 CB919
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “Parts Reference Forum”