88 gl1500 build
Moderators: sunnbobb, Neil, Forum Moderators
-
- Rusty Probie
- Posts: 2
- Joined: Tue Jul 02, 2019 11:46 am
88 gl1500 build
Alright so I found this group in researching my new gl1500 so far I have discovered it is rather difficult to use an 88 gl1500 to do a stripped bobber or cafe bike but nonetheless this is what I want to do and have wanted to do for a long time if anyone has any tips or pointers to help me along in this process I’d very much appreciate it!!
- Rat
- Photo Gallery Admin
- Posts: 15457
- Joined: Fri Oct 21, 2005 9:59 pm
- My Album: https://www.ngwclub.com/gallery/v/wingmans/rat/
- RIP: cookie
- Location: Toronto .... Canada
Re: 88 gl1500 build
Welcome to the 'Wingdom.
Yeah .... lotsa plastics and electronic stuff in the way .... but it can be done .... a member here .... Mike C .... did this to a 1200 Aspencade ....
Gord
Yeah .... lotsa plastics and electronic stuff in the way .... but it can be done .... a member here .... Mike C .... did this to a 1200 Aspencade ....
Gord
"I'd rather Ride than Shine"
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
- Track T 2411
- Honored Life Member
- Posts: 8482
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: 88 gl1500 build
Welcome from Wisconsin. I'm not familiar at all with the 1500's, but I would suggest starting by procuring a good shop manual and detailed wiring diagram. I'm sure a lot of the electrical/electronic stuff could be eliminated, but one needs to have a basic understanding of what works with what before starting to lop off stuff. Good luck, and please start a build thread, as we all like to learn new things!
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
-
- Rusty Probie
- Posts: 2
- Joined: Tue Jul 02, 2019 11:46 am
Re: 88 gl1500 build
Thanks guys will post updates as the project moves along
- ericheath
- Honored Life Member
- Posts: 9580
- Joined: Wed Jul 29, 2009 11:20 am
- Location: Winnipeg, Manituba
Re: 88 gl1500 build
PedroTQ has a 1500 he’s stripping right now. He could probably make his own from scratch though.
viewtopic.php?f=30&t=51412&start=1620
Many pages of head scratching.
viewtopic.php?f=30&t=51412&start=1620
Many pages of head scratching.
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
- ericheath
- Honored Life Member
- Posts: 9580
- Joined: Wed Jul 29, 2009 11:20 am
- Location: Winnipeg, Manituba
Re: 88 gl1500 build
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
- Easter
- True Blue Steel Biker
- Posts: 2999
- Joined: Thu Sep 13, 2012 11:33 am
- Location: South of Houston 100 miles
Re: 88 gl1500 build
I too am working on a GL1500. Not sure where its going or when it will get there but I have been slowly stripping off the stuff that won't be needed. It hasn't run for a while (since before I got it) so that will be one of the first steps. I have given a lot of thought to putting an early VW bug front axle on it and making a rat reverse trike (my wife rides a Spyder). But I am leaning away from that at the moment. One thing is for sure though, there are lots more wires on the 1500 than any of the other GLs I have worked on before. And lots of little black boxes.
Bikes at present:
83 XL 600r with a 2004 XR650L engine
And a slightly worse for the wear BMW GS adventure bike awaiting repair
83 GL in process
83 XL 600r with a 2004 XR650L engine
And a slightly worse for the wear BMW GS adventure bike awaiting repair
83 GL in process
-
- Similar Topics
- Replies
- Views
- Last post
-
- 42 Replies
- 7095 Views
-
Last post by Mike-C
-
- 33 Replies
- 4745 Views
-
Last post by gearhead4207
-
- 80 Replies
- 5481 Views
-
Last post by Chipsnsit
-
- 2 Replies
- 148 Views
-
Last post by Track T 2411