Start of a new build - Anubis.
Moderators: sunnbobb, Neil, Forum Moderators
- sunnbobb
- Facebook Admin
- Posts: 21272
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: Start of a new build - Anubis.
Worked on the rim adapters a bit this evening.
- Attachments
-
- anubis front hub coming together.jpg (70.71 KiB) Viewed 403 times
-
- anubis rear hub coming together.jpg (63.83 KiB) Viewed 403 times
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
- jimmyz3286
- Silver Member
- Posts: 629
- Joined: Sat May 11, 2013 9:04 pm
- Location: Mount Vernon, Wa
Re: Start of a new build - Anubis.
Dude that is looking sharp. We can put the finer media back in and blast the hubs.
"The rain collected pools of images at my feet and they asked the direction to the ocean."
1982 GL1100 Silverback
2004 Roadstar For Sale
1981 CX500 café project for Anakin
1982 GL1100 Silverback
2004 Roadstar For Sale
1981 CX500 café project for Anakin
- sunnbobb
- Facebook Admin
- Posts: 21272
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: Start of a new build - Anubis.
G Thanks bud.
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
- HOTT
- Run Executive
- Posts: 3251
- Joined: Sun Aug 02, 2009 6:48 pm
- My Album: http://www.ngwclub.com/gallery3/index.php/wingmans/HOTT
- Location: Spring,TX
- Contact:
Re: Start of a new build - Anubis.
So is there a story to go with the shortened drill bit ?
If we can't fix it, we can fix it so no one else can.
the Condor BOTY 2011
Ol' Sparky BOTM Dec. 2011
Lucky #13 BOTY 2018
the Condor BOTY 2011
Ol' Sparky BOTM Dec. 2011
Lucky #13 BOTY 2018
- sunnbobb
- Facebook Admin
- Posts: 21272
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: Start of a new build - Anubis.
I used it as a center punch to locate my drill press
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
- ericheath
- Honored Life Member
- Posts: 9580
- Joined: Wed Jul 29, 2009 11:20 am
- Location: Winnipeg, Manituba
Re: Start of a new build - Anubis.
Touche.
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
- sunnbobb
- Facebook Admin
- Posts: 21272
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: Start of a new build - Anubis.
Where does the time go? I have been so busy with work I have not had time to play with my art. lol.
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
- sunnbobb
- Facebook Admin
- Posts: 21272
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: Start of a new build - Anubis.
OK, polished spoke adapters, ground the rotors. Still need to drill the rotors.. Also polished the hydraulic clutch cover and replaced the water pump. Painted the front cover to match the engine, Cast iron.
- Attachments
-
- annubis front hub.jpg (60.02 KiB) Viewed 271 times
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
- Casper
- SUPER BIKER!!!!
- Posts: 3339
- Joined: Sun Aug 07, 2011 9:54 am
- Location: Calgary, Canada
Re: Start of a new build - Anubis.
Progress is good. Me I played with powder coat clear top coats, with added orange pearl, 3 try's 2-1/2 failures. Yours all look like successes.
1976 LTD, Being Returned to Stock
Standard 1976 GL1000 Being Morphed into the Alberta Super Clipper
Standard 1976 GL1000 Being Morphed into the Alberta Super Clipper
- sunnbobb
- Facebook Admin
- Posts: 21272
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: Start of a new build - Anubis.
Well, Casper, it's the failures that teach caution I guess. For me, I was really freaked ordering spokes today. No room for error! What do you do when you have the flu and are home bound? You calculate your spokes! What a pain in the arm that is. I pulled the trigger and ordered 80 spokes and nipples from Buchanan Wheels today. 10 gauge stainless spokes, .900 stainless nipples. I ran through two different spoke calculators and both eventually gave me the same answers. A serious 3 hour exercise to make certain everything was correct. It did however, give me three hours of reprieve from mourning the Seahawk debacle.
- Attachments
-
- 1350344540834_7325448.png (41.21 KiB) Viewed 235 times
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
- sunnbobb
- Facebook Admin
- Posts: 21272
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: Start of a new build - Anubis.
Alright. Finished cleaning the front transmission cover. painted it, and replaced the water pump. I also finished polishing the rear cover and am waiting for a few gaskets to come. Today I am going to reassemble the front cover and install the various small polished covers on the block. Pics to come.
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
- sunnbobb
- Facebook Admin
- Posts: 21272
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: Start of a new build - Anubis.
Kicked some backside today. Something about Pink Floyd, and a good nights rest, helped me to get going on this puppy.
In the following pictures you can see the painted block, and polished parts. The color of the block is cast iron. The color of the front cover is a slightly light shade of cast iron.
Pictured on the bench is a polished rear case, a hydraulic clutch conversion cover, an oil cooler adapter, rebuilt heads, and a bunch of polished engine bits. The water pump was replaced in the tranny cover. In the rear cover, I refurbed the pulse generator and vacuum advance unit. This engine has a lot of dirty stuff in the block, so a diesel wash will happen once I get it buttoned up.
The valve and timing belt covers have also been polished and await install along with new gaskets and bolt seals.
The gaskets came in today so I am ready to assemble. Almost completely. I forgot to order an o-ring for the oil sump filter cover. Dang. Postage for that part will be more than the part! I might just scavenge a used one.
I'll also be replacing the shifter seal while the engine is out,as well as swapping out the starter clutch for one I cleaned and reworked.
In the following pictures you can see the painted block, and polished parts. The color of the block is cast iron. The color of the front cover is a slightly light shade of cast iron.
Pictured on the bench is a polished rear case, a hydraulic clutch conversion cover, an oil cooler adapter, rebuilt heads, and a bunch of polished engine bits. The water pump was replaced in the tranny cover. In the rear cover, I refurbed the pulse generator and vacuum advance unit. This engine has a lot of dirty stuff in the block, so a diesel wash will happen once I get it buttoned up.
The valve and timing belt covers have also been polished and await install along with new gaskets and bolt seals.
The gaskets came in today so I am ready to assemble. Almost completely. I forgot to order an o-ring for the oil sump filter cover. Dang. Postage for that part will be more than the part! I might just scavenge a used one.
I'll also be replacing the shifter seal while the engine is out,as well as swapping out the starter clutch for one I cleaned and reworked.
- Attachments
-
- anubis block painted.jpg (31.63 KiB) Viewed 190 times
-
- anubis cleaned polished parts.jpg (62.79 KiB) Viewed 190 times
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
- Norbert R
- Gold Member
- Posts: 1373
- Joined: Wed Apr 03, 2013 3:13 pm
- Location: Johannesburg South Africa
Re: Start of a new build - Anubis.
Sunny, I am in awe of the quality of your work as always, not to mention your creativity.
BTW, love the pic of No Quarter on your FB page, what an amazing image that is!!!
BTW, love the pic of No Quarter on your FB page, what an amazing image that is!!!
- sunnbobb
- Facebook Admin
- Posts: 21272
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: Start of a new build - Anubis.
Hey thanks Norbert!
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
- sunnbobb
- Facebook Admin
- Posts: 21272
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: Start of a new build - Anubis.
Another day of engine work
- Attachments
-
- anubis short block finished.jpg (45.98 KiB) Viewed 150 times
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 69 Replies
- 9026 Views
-
Last post by gearhead4207
-
- 13 Replies
- 1027 Views
-
Last post by Easter
-
- 7 Replies
- 496 Views
-
Last post by CYBORG
-
- 12 Replies
- 450 Views
-
Last post by piperpa30