Start of a new build - Anubis.
Moderators: sunnbobb, Neil, Forum Moderators
- JBz
- SUPER BIKER!!!!
- Posts: 3070
- Joined: Wed Jan 31, 2007 8:11 pm
- Location: dayton nv
Re: Start of a new build - Anubis.
id start with a new box that matches the bottom sc and put the intake runners on that box . bov for backfire??? being a wet systym I wouldn't think so. A boost operated flapper like a choke ahead of the air cleaner to slow down incoming air at set psi is what I was thinking. That's the nice part of EFI. Usually a dry systym and then a bov if necessary. A draw thru like yours is easier than a blow thru as the carb doesn't need much work though . They make pressure releases for SC s but to modify yours would cost$$$ and being a wet sytsym wouldn't be advisable as whatever pressure Your are trying to release is going to have fuel in it. Can You say torch?? jb
jbz........... Thinkin about sh-t too hard and You wont get anything done
-
- Brass Member
- Posts: 21
- Joined: Sun Jul 05, 2015 5:38 am
- Location: Mitrovica north
Re: Start of a new build - Anubis.
An FI system on top of the SC is a very interesting thought. Of course a carb is a fraction of the cost.JBz wrote:id start with a new box that matches the bottom sc and put the intake runners on that box . bov for backfire??? being a wet systym I wouldn't think so. A boost operated flapper like a choke ahead of the air cleaner to slow down incoming air at set psi is what I was thinking. That's the nice part of EFI. Usually a dry systym and then a bov if necessary. A draw thru like yours is easier than a blow thru as the carb doesn't need much work though . They make pressure releases for SC s but to modify yours would cost$$$ and being a wet sytsym wouldn't be advisable as whatever pressure Your are trying to release is going to have fuel in it. Can You say torch?? jb
Agreed on your idea to to size the plenum box to match the bottom of the SC. There seems to be more than enough lateral room across the top of the motor to accommodate this.
Also making the plenum box wider to match the opening of the SC will avoid a tall transition piece keeping the whole assembly from getting too tall.
1975 GL1000 Nekked (Does double duty as tug for the hack)
1981 GS1100e
1981 GS1100e
-
- Chrome Member
- Posts: 110
- Joined: Mon Apr 13, 2009 9:58 am
- Location: Tracy, California
Re: Start of a new build - Anubis.
Sunnbobb doing my annual checkup, pretty impressive.
Loves to tinker[img]http://www.nakedgoldwings.com/albums/NGW/BADRICE1_1.jpg[/img]
- duke182
- SUPER BIKER!!!!
- Posts: 3375
- Joined: Mon Jul 05, 2010 11:33 pm
- My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
- Location: hope,ark
Re: Start of a new build - Anubis.
Hey sunnbobb
Are you holding out on us or are you so busy making money that you dont have time to spend it?
Are you holding out on us or are you so busy making money that you dont have time to spend it?
God bless those who protect our freedom, at every level
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
- ericheath
- Honored Life Member
- Posts: 9580
- Joined: Wed Jul 29, 2009 11:20 am
- Location: Winnipeg, Manituba
Re: Start of a new build - Anubis.
Asks the guy who titled his build, " The slowest build in the world." But we could use an update. Just kidding Duke.
Whatever I suggest here should be given ample time for a moderator to delicately correct. I apologize in advance.
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
77 WING, 1200 engine with 77 heads, cams, gl1100 foot pegs, Magna V65 front end, 764A carbs, [-gone Suzuki M109 monoshock--, replaced with gl1100 shocks] gl 1200 swing arm, gl1500 final drive, wheel and rear brakes Valkyrie seat, Meanstreak tank, Sportster pipes, Power Arc ignition off crank.
77 Wing. black
83 Wing, in pieces
"Continuing education is important even if the subject matter is fairly useless (as in this case)."---Greg Foresi
- sunnbobb
- Facebook Admin
- Posts: 21272
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: Start of a new build - Anubis.
zzzzzzzzzzzz
hahaha
just putting things together, meanwhile work has been a slam. Greenhouses, remodels and polishing, I have not had a moment to make a push forward..
thanks for checking.. the bread will rise..
hahaha
just putting things together, meanwhile work has been a slam. Greenhouses, remodels and polishing, I have not had a moment to make a push forward..
thanks for checking.. the bread will rise..
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
- duke182
- SUPER BIKER!!!!
- Posts: 3375
- Joined: Mon Jul 05, 2010 11:33 pm
- My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
- Location: hope,ark
Re: Start of a new build - Anubis.
ericheath wrote:Asks the guy who titled his build, " The slowest build in the world." But we could use an update. Just kidding Duke.
God bless those who protect our freedom, at every level
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
-
- Lead Member
- Posts: 3
- Joined: Fri Jul 19, 2013 7:12 am
- Location: Suomi
Re: Start of a new build - Anubis.
Here is how I am doing my own supercharged Wing.
- Attachments
-
- 20170401_135620.jpg (162.13 KiB) Viewed 275 times
-
- 20170401_135642.jpg (187.49 KiB) Viewed 275 times
-
- Lead Member
- Posts: 3
- Joined: Fri Jul 19, 2013 7:12 am
- Location: Suomi
Re: Start of a new build - Anubis.
Intake manifold is now on real welder so he can weld it to work.
- sunnbobb
- Facebook Admin
- Posts: 21272
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: Start of a new build - Anubis.
Excellent! Where did you get your pulleys?
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
-
- Lead Member
- Posts: 3
- Joined: Fri Jul 19, 2013 7:12 am
- Location: Suomi
Re: Start of a new build - Anubis.
The one on the charger came with it and other I got from a friend. He said that it was taken from some GM charger.
I had to make an adapter to fit it right. I looked how Radnakk had made his.
I had to make an adapter to fit it right. I looked how Radnakk had made his.
-
- Lead Member
- Posts: 6
- Joined: Thu Jul 23, 2015 12:31 am
- Location: quebec
Re: Start of a new build - Anubis.
Is there any development on this project? looking to do it myself...
- sunnbobb
- Facebook Admin
- Posts: 21272
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: Start of a new build - Anubis.
Took a break, back on it in a month or so. Had to drop back and take care of some other running rigs..
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 69 Replies
- 9026 Views
-
Last post by gearhead4207
-
- 13 Replies
- 1027 Views
-
Last post by Easter
-
- 7 Replies
- 496 Views
-
Last post by CYBORG
-
- 12 Replies
- 450 Views
-
Last post by piperpa30