New Member - 75' GL1000 Project
Moderators: Neil, redwood, rcmatt007, Forum Moderators
-
- Lead Member
- Posts: 7
- Joined: Mon Oct 16, 2017 6:39 pm
New Member - 75' GL1000 Project
I just bought a 75' GL1000 and am in the process of restoring it back to stock. It does not need too much work and is only missing a few small parts.
The bike had a prototype carb from the prior owner but he included the original carbs when I bought it. I put the originals back on this weekend. It runs ok but I now get a LOT of gas coming out of the left side exhaust. I read here it is probably a stuck float so I guess I will be removing the carbs :-(
Thank you for letting me join in the fun!
The bike had a prototype carb from the prior owner but he included the original carbs when I bought it. I put the originals back on this weekend. It runs ok but I now get a LOT of gas coming out of the left side exhaust. I read here it is probably a stuck float so I guess I will be removing the carbs :-(
Thank you for letting me join in the fun!
- Rat
- Photo Gallery Admin
- Posts: 15457
- Joined: Fri Oct 21, 2005 9:59 pm
- My Album: https://www.ngwclub.com/gallery/v/wingmans/rat/
- RIP: cookie
- Location: Toronto .... Canada
Re: New Member - 75' GL1000 Project
Welcome to the 'Wingdom.
Great find .... ShopTalk has lots of good info ....
Gord
Great find .... ShopTalk has lots of good info ....
Gord
"I'd rather Ride than Shine"
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
- 5speed
- Honored Life Member
- Posts: 5311
- Joined: Sat Jul 11, 2015 2:37 pm
- Location: Nova Scotia Canada
Re: New Member - 75' GL1000 Project
welcome. nice looking 57 too.
1982 1100 standard. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
1986 Yamaha FJ1200
2000 Yamaha Roadstar
1976 GoldWing. running but not on the road
1978 Goldwing. future cafe project.
2019 Can-Am ryker (boss's new ride)
2002 Shadow American Classic(sold)
1983 Shadow 500. (sold)
- CYBORG
- Moderator
- Posts: 24537
- Joined: Mon Jan 14, 2008 12:52 pm
- Location: Muskegon mich
Re: New Member - 75' GL1000 Project
nice bike,........but the shop is WAY to clean
1978 custom GL1000
1977 custom with 1200 engine
1985 gl1200
1977 custom with 1200 engine
1985 gl1200
- Track T 2411
- Honored Life Member
- Posts: 8482
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: New Member - 75' GL1000 Project
Welcome from Wisconsin. Nice looking ride!
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- delling3
- Gold Member
- Posts: 1177
- Joined: Mon Sep 17, 2012 8:14 am
- Location: Sterling Heights, Michigan
Re: New Member - 75' GL1000 Project
Is that a '57 Chevy in the background? Looks nice!
delling3
1979 Yamaha XS750SF
Previous:
1978 GL1000 - JUNE 2017 BOTM: Sold
2006 Kawasaki Concours: Sold
1995 Kawasaki Concours: Crashed/totalled.
1976 GL1000: LAST RESTORATION, sold
1981 Honda CB900F Supersport: 3rd restoration, sold.
1979 Yamaha XS-750F: 2nd restoration, sold.
1982 Honda FT-500 Ascot: First (only) new bike. Family forces sale.
1973 CB500 Four: First restoration, long gone.
1972 Suzuki TS-100: First bike, sold.
Only dead fish go with the flow . . .
1979 Yamaha XS750SF
Previous:
1978 GL1000 - JUNE 2017 BOTM: Sold
2006 Kawasaki Concours: Sold
1995 Kawasaki Concours: Crashed/totalled.
1976 GL1000: LAST RESTORATION, sold
1981 Honda CB900F Supersport: 3rd restoration, sold.
1979 Yamaha XS-750F: 2nd restoration, sold.
1982 Honda FT-500 Ascot: First (only) new bike. Family forces sale.
1973 CB500 Four: First restoration, long gone.
1972 Suzuki TS-100: First bike, sold.
Only dead fish go with the flow . . .
-
- Lead Member
- Posts: 7
- Joined: Mon Oct 16, 2017 6:39 pm
Re: New Member - 75' GL1000 Project
Thank you all for the welcome. Long term 56' Chevy wagon project in the background. Will look around ShopTalk for advice on the gas leak.
- chewy999
- SUPER BIKER!!!!
- Posts: 3214
- Joined: Tue Oct 16, 2012 11:21 am
- Location: Haddenham, Cambs, UK
Re: New Member - 75' GL1000 Project
Welcome from the UK. Nice looking bike, not sure of your experience with GL's, but do you plan to change the belts any time soon?
Enjoy the ride.
Enjoy the ride.
Previous Rides,
1980 CB250N Good to learn on
1981 CX500 good mid range tourer, went to Austria on it!
1983 GL1100C Pride and joy, sold when I bought my 1st house, big mistake
1985 GL650 Silverwing another mistake, horrible bike
1986 CBX550 Good commuter
1989 Suzuki GS750 (1976) cheap and cheerful until a dog ran out in front of me on Xmas Eve, 1991
Current bikes
2010 CB1300 back on a bike after 19 years, two divorces, children grown up etc
1980 GL1100 NOW ON THE ROAD, still use CB1300.
1980 CB250N Good to learn on
1981 CX500 good mid range tourer, went to Austria on it!
1983 GL1100C Pride and joy, sold when I bought my 1st house, big mistake
1985 GL650 Silverwing another mistake, horrible bike
1986 CBX550 Good commuter
1989 Suzuki GS750 (1976) cheap and cheerful until a dog ran out in front of me on Xmas Eve, 1991
Current bikes
2010 CB1300 back on a bike after 19 years, two divorces, children grown up etc
1980 GL1100 NOW ON THE ROAD, still use CB1300.
- robin1731
- Membership Admin
- Posts: 21724
- Joined: Mon May 29, 2006 8:31 am
- Location: Decatur, Indiana
Re: New Member - 75' GL1000 Project
Welcome aboard. Please start a thread in the project section on your progress.
.
.
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
- Sugs
- Gold Member
- Posts: 1069
- Joined: Sun Aug 09, 2015 6:12 pm
- Location: Springfield, MO
Re: New Member - 75' GL1000 Project
Welcome to the site! Looks like PO was running single carb conversion, I wonder which one it was?
_______________________
'79 Honda GL1000 Goldwing
'79 Honda GL1000 Goldwing
- gltriker
- Honored Life Member
- Posts: 5053
- Joined: Fri Sep 24, 2010 9:11 pm
- Location: central NY State
Re: New Member - 75' GL1000 Project
Cliff (74yrs )
Keep your eyes and ears open and you'll learn something new, everyday.
New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^
RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi
"Can't see the paint when your looking thru the handlebars..........." -Oldewing
"I'd rather Ride than Shine" -RAT Me Too!!
Cliff
'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM https://nakedgoldwingsclub.com/forum/page/Welcome
previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
Keep your eyes and ears open and you'll learn something new, everyday.
New users please visit our "Shop Talk" for common tips and help: <---jdvorchak
http://www.ngwclub.com/forum/page/ST
^^^^^^^click up here^^^^^
RE: a thorough fuel tank cleaning
"And your carbs will thank you. They no longer live down stream from a sewage plant." -gregforesi
"Can't see the paint when your looking thru the handlebars..........." -Oldewing
"I'd rather Ride than Shine" -RAT Me Too!!
Cliff
'75 GL1000 home built trike; http://www.ngwclub.com/forum/viewtopic.php?f=30&t=39996
October,2017 BOTM https://nakedgoldwingsclub.com/forum/page/Welcome
previous rides:
1953 H-D Servi-car, naked, 1969-1978 (serial#53G1559 committed to memory!)
1980 CB900 Custom (triked) 1997-2003 .... R.I.P.
-
- True Blue Steel Biker
- Posts: 2314
- Joined: Wed Apr 11, 2012 10:50 am
Re: New Member - 75' GL1000 Project
Nice! That's a beauty! You could send your carbs out. Or order a full kit. Sounds like lots of gas in the oil, fun, fun, fun.
Dave
1975 GL 1000
1980 XS650
1981 ct110
1972 F7 KAW 175
2000 moby blaze 40cc
Chihuahua (Ellie)
Chihuahua #2(Blaze)
1975 GL 1000
1980 XS650
1981 ct110
1972 F7 KAW 175
2000 moby blaze 40cc
Chihuahua (Ellie)
Chihuahua #2(Blaze)
-
- Lead Member
- Posts: 7
- Joined: Mon Oct 16, 2017 6:39 pm
Re: New Member - 75' GL1000 Project
Is there a specific place I can send them out that specializes in the carb rebuilds that owners here use? It looks like the kit is going to be $200 and it seems a little more complex than rebuilding a Carter I put the single carb back on it this past weekend so I could ride it.Gowing wrote:Nice! That's a beauty! You could send your carbs out. Or order a full kit. Sounds like lots of gas in the oil, fun, fun, fun.
- robin1731
- Membership Admin
- Posts: 21724
- Joined: Mon May 29, 2006 8:31 am
- Location: Decatur, Indiana
Re: New Member - 75' GL1000 Project
If you check Randakks site he has his approved carb rebuilders. I am one name on that list.
.
.
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
- Track T 2411
- Honored Life Member
- Posts: 8482
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: New Member - 75' GL1000 Project
+1robin1731 wrote:If you check Randakks site he has his approved carb rebuilders. I am one name on that list.
.
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
-
- Similar Topics
- Replies
- Views
- Last post
-
- 11 Replies
- 537 Views
-
Last post by redwood
-
- 94 Replies
- 12285 Views
-
Last post by Jai
-
- 14 Replies
- 1160 Views
-
Last post by Halfnaked
-
- 2 Replies
- 466 Views
-
Last post by pass_the_bacon
-
- 109 Replies
- 6100 Views
-
Last post by MikeNTexas