85 Interstate in Birmingham, AL
Moderators: Neil, redwood, rcmatt007, Forum Moderators
- Fencejumper09
- Lead Member
- Posts: 3
- Joined: Tue Mar 14, 2017 9:07 am
- Contact:
85 Interstate in Birmingham, AL
New to the forum and new to Goldwing ownership!
A friend from another local forum posted up that his parts bike was no longer needed as he had traded his 85 Goldwing in for a 2016 (that thing is sweet). I have been looking for a project bike for a while since I have been helping a buddy with three of his projects! The price was listed as free but I had to make an 8 hour round trip to ! Needless to say the Goldwing is in my basement now!
The story is that the bike hasn't run in over 4 years and has been picked apart as needed for his daily driver. Known issues include missing exhaust, bad starter solenoid, locked up brakes (had to pull it on the trailer with his truck), dirty carbs, crusty clutch master cylinder, and battery.
Here is what it looked like when I got it!
I have been working on it for just over a month now and have been going through Randakks recommendations for starting a bike that has been sitting! Here is the list of things I have completed as of today:
-Tore down and rebuilt all brake calipers
-Cleaned and rebuilt the carbs with Randakks kit
-Installed ebay starter solenoid with built in ATM fuse
-Rebuilt front forks (lots of rust and crud around the seals)
-New Shinko tires
-Replaced Thermostat
-New Timing Belts
-Currently running a radiator flush in it right now
-I replaced the sight glasses in the clutch and front brake master cylinders
-New AGM battery
-Got some used headers off of ebay
-New throttle cables
The plan!
I really want to strip this thing down but am not 100% sure of the final styling. It will probably end up as just a stripped down stockish bike as i don't have plans to cut the frame. The next major project is to figure out the issues with the clutch and then work on removing excess wiring! Wish me luck!
Here are some progress photos!
It's Alive!!
(I can't get the video to embed)
https://youtu.be/EbD4GuCyLl4
A friend from another local forum posted up that his parts bike was no longer needed as he had traded his 85 Goldwing in for a 2016 (that thing is sweet). I have been looking for a project bike for a while since I have been helping a buddy with three of his projects! The price was listed as free but I had to make an 8 hour round trip to ! Needless to say the Goldwing is in my basement now!
The story is that the bike hasn't run in over 4 years and has been picked apart as needed for his daily driver. Known issues include missing exhaust, bad starter solenoid, locked up brakes (had to pull it on the trailer with his truck), dirty carbs, crusty clutch master cylinder, and battery.
Here is what it looked like when I got it!
I have been working on it for just over a month now and have been going through Randakks recommendations for starting a bike that has been sitting! Here is the list of things I have completed as of today:
-Tore down and rebuilt all brake calipers
-Cleaned and rebuilt the carbs with Randakks kit
-Installed ebay starter solenoid with built in ATM fuse
-Rebuilt front forks (lots of rust and crud around the seals)
-New Shinko tires
-Replaced Thermostat
-New Timing Belts
-Currently running a radiator flush in it right now
-I replaced the sight glasses in the clutch and front brake master cylinders
-New AGM battery
-Got some used headers off of ebay
-New throttle cables
The plan!
I really want to strip this thing down but am not 100% sure of the final styling. It will probably end up as just a stripped down stockish bike as i don't have plans to cut the frame. The next major project is to figure out the issues with the clutch and then work on removing excess wiring! Wish me luck!
Here are some progress photos!
It's Alive!!
(I can't get the video to embed)
https://youtu.be/EbD4GuCyLl4
1985 Goldwing Interstate
2013 KTM 690 Enduro (& Supermoto)
2013 KTM 690 Enduro (& Supermoto)
- Track T 2411
- Honored Life Member
- Posts: 8482
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: 85 Interstate in Birmingham, AL
Welcome from Wisconsin! Great progress on the bike. Slow but sure! Isn't it a wonderful feeling when they fire up for the first time?
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- Rat
- Photo Gallery Admin
- Posts: 15456
- Joined: Fri Oct 21, 2005 9:59 pm
- My Album: https://www.ngwclub.com/gallery/v/wingmans/rat/
- RIP: cookie
- Location: Toronto .... Canada
Re: 85 Interstate in Birmingham, AL
Welcome to the 'Wingdom.
Serious project you have there, like the progress and the photos.
Lots of good info in ShopTalk too.
Gord
Serious project you have there, like the progress and the photos.
Lots of good info in ShopTalk too.
Gord
"I'd rather Ride than Shine"
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
‘14 KLR650 ... not a rat ... yet
‘84 GL1200i ‘R2B6' (Rat to Be 6, the last, adopted by twowings)
My Original 'RAT' was a hybrid '82 CB900/1100F
- Goboy
- Billet Alum. Member
- Posts: 222
- Joined: Sun Apr 24, 2016 10:49 pm
- My Album: viewtopic.php?f=30&t=60678
- Location: Hinton Alberta
Re: 85 Interstate in Birmingham, AL
Great work! 1200cc's in lighter package will MOVE!
You're too small to ride a hog Billy!
Mike
1978 GL1000
Previous bikes: 05 Yamaha FJR 1300, 79 Suzuki GS 1000, 75 Yamaha XS 650, 73 Kawasaki S2 350
Mike
1978 GL1000
Previous bikes: 05 Yamaha FJR 1300, 79 Suzuki GS 1000, 75 Yamaha XS 650, 73 Kawasaki S2 350
- rcmatt007
- Treasurer
- Posts: 31305
- Joined: Fri Oct 21, 2005 12:48 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/rcmatt007/
- Location: New River Valley, Virginia
Re: 85 Interstate in Birmingham, AL
the good news is 1200 carbs are relatively easy to rebuild..... welcome to NGW
-Rodger-
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, BOTM June 2015 de-evolving this very moment viewtopic.php?f=30&t=65511
76 Ltd "cookies bike" ALMOST DONE
79 project, finished, FOR SALE
'86 1200 (Beth's)(FOR SALE) with motorvation sidecar (sidecar sold) , July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's) (FOR SALE). I guess you can say we have MBS
all it takes for evil to prosper is the want of a few good men to do nothing-Edmund Burke
The question is not how much time do you have, it is what you do with the time that you have Gandalf
"One of the greatest dignities of humankind is that each successive generation is invested in the welfare of each new generation." Fred Rodgers
"it takes 10,000 hours to become an expert" ancient saying
78 constantly modified/customized since 1978, BOTM June 2015 de-evolving this very moment viewtopic.php?f=30&t=65511
76 Ltd "cookies bike" ALMOST DONE
79 project, finished, FOR SALE
'86 1200 (Beth's)(FOR SALE) with motorvation sidecar (sidecar sold) , July 2017 BOTM
'17 HD Road king and 08 HD Heritage softail (Beth's) (FOR SALE). I guess you can say we have MBS
- sunnbobb
- Facebook Admin
- Posts: 21272
- Joined: Thu Jan 10, 2008 4:09 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/sunnbobb/
- Location: LaConner, WA
Re: 85 Interstate in Birmingham, AL
Welcome aboard Matey! Looking forward to progress!
I found the end of the internet
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
---- Bradshaw Bikes custom polishing for your wing. Visit us on facebook!
1978 Learning Experience
1980 County Road Hauler "Brain Damage"
1978 Cafe Custom Gl1000 "Vyper"
1977 Bulldog Inspired "Vaincre"
1981 Street Fighter GL1100 "No Quarter"
1983 Supercharged Street Drag "Anubis" (in worx)
1983 gl1100 mint restoration "Kristen"
1985 Aspencade..pondering.
- Fencejumper09
- Lead Member
- Posts: 3
- Joined: Tue Mar 14, 2017 9:07 am
- Contact:
Re: 85 Interstate in Birmingham, AL
Wow I have been busy! New baby arrived and I participated in a 24 Hour Enduro Race so I haven't gotten much done on the Goldwing.
I cranked her up this weekend and wouldn't you know, sitting for nearly a month has caused an idle issue. As in it won't!
I know I made a rookie mistake leaving ethanol fuel in her but it is history now and I have to fix her. I changed the fuel filter and put in some fresh fuel with Sea Foam hoping that would help but no dice yet (it has only been in two days).
I did take her for her inaugural trip around the neighborhood on July 4th and she was very well behaved except for the idle issue.
I think I have some trash in the pilot jets so I am planning to pull the carbs again this weekend and clean them up again.
This is just a crapy because before she sat I synced the carbs and she was purring like a kitten. Well lesson learned! Wish me luck!
I cranked her up this weekend and wouldn't you know, sitting for nearly a month has caused an idle issue. As in it won't!
I know I made a rookie mistake leaving ethanol fuel in her but it is history now and I have to fix her. I changed the fuel filter and put in some fresh fuel with Sea Foam hoping that would help but no dice yet (it has only been in two days).
I did take her for her inaugural trip around the neighborhood on July 4th and she was very well behaved except for the idle issue.
I think I have some trash in the pilot jets so I am planning to pull the carbs again this weekend and clean them up again.
This is just a crapy because before she sat I synced the carbs and she was purring like a kitten. Well lesson learned! Wish me luck!
1985 Goldwing Interstate
2013 KTM 690 Enduro (& Supermoto)
2013 KTM 690 Enduro (& Supermoto)
- Fencejumper09
- Lead Member
- Posts: 3
- Joined: Tue Mar 14, 2017 9:07 am
- Contact:
Re: 85 Interstate in Birmingham, AL
Forgot to mention that I rebuilt the clutch master and slave cylinders! They were disgusting, I will post some pictures when I have a better internet connection!
1985 Goldwing Interstate
2013 KTM 690 Enduro (& Supermoto)
2013 KTM 690 Enduro (& Supermoto)
- robin1731
- Membership Admin
- Posts: 21724
- Joined: Mon May 29, 2006 8:31 am
- Location: Decatur, Indiana
Re: 85 Interstate in Birmingham, AL
Fencejumper09 wrote:Forgot to mention that I rebuilt the clutch master and slave cylinders! They were disgusting, I will post some pictures when I have a better internet connection!
Please start a thread in the project section.
.
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
-
- Similar Topics
- Replies
- Views
- Last post
-
- 25 Replies
- 806 Views
-
Last post by jd82wing
-
- 8 Replies
- 220 Views
-
Last post by lhaney429
-
- 2 Replies
- 432 Views
-
Last post by Shadowjack
-
- 22 Replies
- 1657 Views
-
Last post by gltriker