We have recently changed the registration process and it is now completely automated. Because of that we have lost our checks and balances for keeping out the Spam and unwanted advertisers.
From this point forward anyone with less than 3 posts will fall into the "Newly Registered Users" Group. That means that you can only start a Thread in the Introduction Forum. All other Forums you can respond to existing Threads but you can not initiate a Thread. If you respond to an existing thread your responses will go the the Moderators Queue and be screened before being approved and posted.
This only lasts for your first 3 posts then you will be given "Regular User" Authorities.
"Newly Registered Users"
Moderators: Neil, redwood, rcmatt007, Forum Moderators
- Whiskerfish
- President
- Posts: 36936
- Joined: Thu Feb 16, 2006 9:34 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/whiskerfish/
- Location: Norfolk Va
"Newly Registered Users"
"Agreement is not a requirement for Respect" CDR Michael Smith USN (Ret) 2017
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
"The book is wrong, this whole Conclusion is Fallacious" River Tam
"Yea I do dance awkwardly, and I am having more fun than you" Taylor Swift
2008 GL1800 IIIA "TH3DOG"
1984 GL1200 Standard
1975/6/7/8/9 Arthur Fulmer Dressed Road bike
1975 Naked Noisy and Nasty in town bike
Psst. oh and by the way CHANGE YOUR BELTS!!!!
-
- Rusty Probie
- Posts: 1
- Joined: Mon Jan 25, 2010 8:52 pm
- Location: yadkinville, nc
Re: "Newly Registered Users"
Whiskerfish,
I am looking for a source to prrchase the two planetary gears in the head of 82 GL1100 starter. Starter locked up, after disassembly, found one tooth broken off and locking up starter motor.
"AMOSA" is cast into housing at mounting lug. Any help in locating parts would be greatly appreciated.
Norton
I am looking for a source to prrchase the two planetary gears in the head of 82 GL1100 starter. Starter locked up, after disassembly, found one tooth broken off and locking up starter motor.
"AMOSA" is cast into housing at mounting lug. Any help in locating parts would be greatly appreciated.
Norton
-
- Lead Member
- Posts: 9
- Joined: Sat Jan 23, 2010 4:18 pm
- Location: theodore,Al
Re: "Newly Registered Users"
I had the same problem, pretty much had to but new aftermarket starter(100.00) and take new gears out and polish then till the opening in sleeve would fit.norton wrote:Whiskerfish,
I am looking for a source to prrchase the two planetary gears in the head of 82 GL1100 starter. Starter locked up, after disassembly, found one tooth broken off and locking up starter motor.
"AMOSA" is cast into housing at mounting lug. Any help in locating parts would be greatly appreciated.
Norton
-
- Lead Member
- Posts: 9
- Joined: Sat Jan 23, 2010 4:18 pm
- Location: theodore,Al
Re: "Newly Registered Users"
Okay, my name is steve, I have a 82GL1100i, I have really been doing alot of work on it, bought it from a guy that hardly rode it, ofcourse, everything that wears out, wears out with me. Now, I am about to do a single carb conversion, Everything else has been replaced, but still runs a few miles and starts running crappie, drops a cylinder. I have been riding for 8 months, before this problem accured. By the force of problems, I have been getting alot of training working on Wing myself. I am member of GWRRA, wonderful folks.........Steve
- Hoosier Daddy
- True Blue Steel Biker
- Posts: 2910
- Joined: Thu May 21, 2009 9:12 pm
- Location: N.E. Indiana (Kendallville)
Re: "Newly Registered Users"
Don't know if this is what whiskerfish had in mind... So I'll PM you Stevesteve kent wrote:Okay, my name is steve, I have a 82GL1100i, I have really been doing alot of work on it, bought it from a guy that hardly rode it, ofcourse, everything that wears out, wears out with me. Now, I am about to do a single carb conversion, Everything else has been replaced, but still runs a few miles and starts running crappie, drops a cylinder. I have been riding for 8 months, before this problem accured. By the force of problems, I have been getting alot of training working on Wing myself. I am member of GWRRA, wonderful folks.........Steve
Bulldoged '81 GL1100 "BOMBER!" BUILD THREAD
Bratstyle '80 GS750L "OVERKILL"
Cafe'd '81 CB750C "ROCK-IT"
Basket Case '72 CB450 K5 "NO CLASS"
Resto-Mod '67 BSA Spitfire "STAY CLEAN"
rainstromrider say's I'm "addicted to the build"... I think he might onto something
Bratstyle '80 GS750L "OVERKILL"
Cafe'd '81 CB750C "ROCK-IT"
Basket Case '72 CB450 K5 "NO CLASS"
Resto-Mod '67 BSA Spitfire "STAY CLEAN"
rainstromrider say's I'm "addicted to the build"... I think he might onto something
- Dragon1404
- Tin Member
- Posts: 10
- Joined: Thu Nov 05, 2009 10:04 am
- Contact:
Re: "Newly Registered Users"
Thanks for the update, Whiskerfish. I guess i'm one of the "Newly Registered User". Wonderful people around here. Love hanging around.
With regards,
Dragon
With regards,
Dragon
Safety First! Style Later!
-
- Rusty Probie
- Posts: 2
- Joined: Wed Feb 10, 2010 2:13 pm
- Location: Waynesville, NC USA
-
- Similar Topics
- Replies
- Views
- Last post
-
- 25 Replies
- 2221 Views
-
Last post by jttorio
-
- 5 Replies
- 407 Views
-
Last post by Patriccio
-
- 0 Replies
- 251 Views
-
Last post by jdvorchak
-
- 6 Replies
- 1435 Views
-
Last post by ole496
-
- 4 Replies
- 340 Views
-
Last post by Fred Camper