Ordered a pair of these off Ebay after reading an article in the latest edition of the VJMC magazine.
Seem to work well. Especially if I used an extra pair of pliers (channelocks) to do the turning.
The first pair I ordered were too small for almost all GL fasteners, but the larger (VT-001-8) work fine.
The smaller (VT-001) does work well with carb screws.
Not that we ever encounter stripped screw heads!
VamPliers - stripped screw removal
Moderators: Whiskerfish, ascot, Forum Moderators
- wog
- Platinum Member
- Posts: 1766
- Joined: Fri Sep 16, 2011 9:08 am
- Location: FL
VamPliers - stripped screw removal
Great to keep these old 'Wings flying on down the road.
- Track T 2411
- Honored Life Member
- Posts: 8511
- Joined: Thu May 29, 2008 9:37 pm
- My Album: http://www.ngwclub.com/gallery/v/wingmans/Track+T+2411/
- Location: Prairie du Sac Wisconsin
Re: VamPliers - stripped screw removal
Cool! And just in time for Halloween, lol!
"I have no special talent. I am only passionately curious." - Albert Einstein
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
"He that is good with a hammer tends to think everything is a nail" - Abraham Maslow
"If you can't take the time to do it right the first time, how are you ever going to find the time to do it over?" -Unknown
Current Rides:
'Grumpy' - '81 Standard, now fully dressed.
'Layla' - '81 Standard w/dealer installed fairing and Hondaline bags.
'Scarlett' '76 'Survivor' nekkid as a j-bird!
Under Construction:
The 'Jalopy' '78-'79 Mash-up
'Quikie' '81 gl1100I back on the lift, project with the step-son!
In The Shed:
'81 gl1100I barn find aka "Josie, the farmer's daughter." (almost comatose build)
'77 gl1000, roller parts bike.
'82 gl1100I, 'Old Crusty' titled roller parts bike (free!)
'82 gl1100I, My first 'Wing, and an expensive lesson!
New2U Bike? Read Me.
- 05c50
- Gold Member
- Posts: 1380
- Joined: Mon Jan 29, 2007 11:05 pm
- Location: Greensburg, Pa
- Contact:
Re: VamPliers - stripped screw removal
I also read the article in this months VJMC Magazine and was thinking about buying a set. Thanks for helping me to decide.......if it's good enough for Wog, it's good enough for me.
....Paul
....Paul
I prefer to ride my wing naked,thank you
My wife asked me "How many bikes does one man need?" My answer "Uhhh.just one more"
75 Goldwing
78 Goldwing
77 CB750a
77 CB550f
80 CB650c
05 Boule C50
My wife asked me "How many bikes does one man need?" My answer "Uhhh.just one more"
75 Goldwing
78 Goldwing
77 CB750a
77 CB550f
80 CB650c
05 Boule C50
- duke182
- SUPER BIKER!!!!
- Posts: 3375
- Joined: Mon Jul 05, 2010 11:33 pm
- My Album: http://ngwclub.com/gallery/v/wingmans/duke182/
- Location: hope,ark
Re: VamPliers - stripped screw removal
You have awakened the tool junkie in me.
Thanks for the info.
Thanks for the info.
God bless those who protect our freedom, at every level
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
Knees in the breeze makes miles of smiles
"Strive for progress, not perfection"-a wise man
1984 1200 standard
click pic to see my gallery
vote in my poll
-
- Similar Topics
- Replies
- Views
- Last post