70's honda sprocket damper bushings where are they!!!

Discuss anything about other motorcycles, accessories, riding gear and other motorcycle related topics.

Moderators: Whiskerfish, ascot, Forum Moderators

Post Reply
mhynze
Billet Alum. Member
Billet Alum. Member
Posts: 240
Joined: Tue Jun 30, 2015 12:48 pm
Location: Ontario

70's honda sprocket damper bushings where are they!!!

#1

Post by mhynze »

Hi guys, takin some time off the wings... goes to powder coat my cb500T wheels, but honda discontinued the bushing, are there equivalents? help?!

or do i give up on powder coat...
1977 GL1000, with GL1100 engine and carbs....in progress
1984 GL1200 Ascenpade gone naked...............in progress
1976 GL1000 1200 Engine, 1200 wheels...........in progress
1983 GL1100 Stock, fully functional!
1982 GL1100 ..................................................in progress
1976 GL1000 Stock resto....................... .........in progress
1978 GL1000....Upgraded...Bad cylinder............in progress

1982 CB900, 83 GL1100 rear end, 2006 gsxr1000 front end, 1200 front wheel..... in progress
1981 CB750k Needs attention.... in progress

The more time I spend on here the farther behind I get
User avatar
rtccp
Titanium Member
Titanium Member
Posts: 343
Joined: Tue Jun 18, 2013 4:31 pm
RIP: 1963-2017
Location: hamilton , ontario, canada

Re: 70's honda sprocket damper bushings where are they!!!

#2

Post by rtccp »

Hey M, I have powder coated several rims with the "cushions" still in them ,never had a problem, just mask them off and let them cool down before you use them...np
1983 GL1100 Standard
mhynze
Billet Alum. Member
Billet Alum. Member
Posts: 240
Joined: Tue Jun 30, 2015 12:48 pm
Location: Ontario

Re: 70's honda sprocket damper bushings where are they!!!

#3

Post by mhynze »

okay i definitely thought they would melt... and im doing my 81 cb 750 too with the comstars same as the goldwings except sprocket driven and the bushing are built inside of the rim so no way to remove them

I really need the slide hammer bearing puller
1977 GL1000, with GL1100 engine and carbs....in progress
1984 GL1200 Ascenpade gone naked...............in progress
1976 GL1000 1200 Engine, 1200 wheels...........in progress
1983 GL1100 Stock, fully functional!
1982 GL1100 ..................................................in progress
1976 GL1000 Stock resto....................... .........in progress
1978 GL1000....Upgraded...Bad cylinder............in progress

1982 CB900, 83 GL1100 rear end, 2006 gsxr1000 front end, 1200 front wheel..... in progress
1981 CB750k Needs attention.... in progress

The more time I spend on here the farther behind I get
Post Reply
  • Similar Topics
    Replies
    Views
    Last post

Return to “General Motorcycle Forum”