saddle bag seals

[5speed]

Mine are pretty well beat.
Does anyone have a source for something suitable as a replacement.
I checked the steele rubber website and don't see anything that looks like it would work.

[Sandy]

https://craven-equipment.co.uk/fixtures ... ry/beading
Used them to refurbish my Craven bags.
Maybe work on other manufacturers bags?

[todd54219]

I have some older Wixom bags and I used METRO MOULDING rubber parts. Found a profile that would work and ordered it. Worked great. Lots of choices.

[5speed]

you wouldn't happen to remember which one you used would you?

[todd54219]

I do not remember the exact one. I did just looked on their site and found their #TS 3-25 which is 25 feet or TS 3-12 which is 12 feet. It is not cheap. I can send you a piece that I have left over. It is about 10 inches long, but you can see if it will work for you. Send me an email twolmstead38@gmail.com with address and I will send it to you.

Todd

[5speed]

I do not remember the exact one. I did just looked on their site and found their #TS 3-25 which is 25 feet or TS 3-12 which is 12 feet. It is not cheap. I can send you a piece that I have left over. It is about 10 inches long, but you can see if it will work for you. Send me an email twolmstead38@gmail.com with address and I will send it to you.

Todd

thank you very much Todd. I will send you an e-mail.

[fcmusician]

Mine are pretty well beat.
Does anyone have a source for something suitable as a replacement.
I checked the steele rubber website and don't see anything that looks like it would work.

Larson Doorsweep #2023197R Plus some Trim tape from 3M #03615 7/8 X5 This works perfect.

[todd54219]

George, I sent you an email

[5speed]

George, I sent you an email

I replied.

[5speed]

todd54219
the weather stripping arrived yesterday.
thank you very much. It answered a question I had. I had looked at that style of weather stripping but wasn't sure if it would work or be to big.