Hi there,
I am planning to strip the harness and set up an M-Unit on a 1977 GL1000. I would like to know what is the purpose of the
Resistor Assembly and the Diodes? These components are found on the left side of the false tank among the Lightning Unit which I am not planning to use.
Could I bypass these units?
77 GL1000 Resistor Assembly + Diodes
Moderators: CYBORG, Oldewing, robin1731, Forum Moderators
-
- Brass Member
- Posts: 28
- Joined: Tue Feb 28, 2017 1:24 pm
- RB
- Honored Life Member
- Posts: 4268
- Joined: Sun Apr 29, 2007 7:26 am
- Location: AZ
Re: 77 GL1000 Resistor Assembly + Diodes
The diodes are kind of safety components two for the lights and one for ignition and one for neutral light prevent starting in gear with clutch out..
98 1500 SE..
99 1500 SE SOLD
97 SE 1500 SOLD
83 SOLD
82 REBUILT sold!!!
81 DAILY RIDER sold her ((!
81 REBUILT SOLD!!!
81 REBUILT SOLD!!
80 REBUILT SOLD
79 IN BASKET PARTS FOR SALE
79 CLEANED UP AND SOLD
78 REBUILT SOLD
77 REBUILT SOLD
76 SOLD/PARTIAL REBUILD
76 REBUILT AND SOLD
75 REBUILT SOLD
75 REBUILT SOLD
75 REBUILD SOLD
FAIR WINDS,
RB
99 1500 SE SOLD
97 SE 1500 SOLD
83 SOLD
82 REBUILT sold!!!
81 DAILY RIDER sold her ((!
81 REBUILT SOLD!!!
81 REBUILT SOLD!!
80 REBUILT SOLD
79 IN BASKET PARTS FOR SALE
79 CLEANED UP AND SOLD
78 REBUILT SOLD
77 REBUILT SOLD
76 SOLD/PARTIAL REBUILD
76 REBUILT AND SOLD
75 REBUILT SOLD
75 REBUILT SOLD
75 REBUILD SOLD
FAIR WINDS,
RB
- robin1731
- Membership Admin
- Posts: 21729
- Joined: Mon May 29, 2006 8:31 am
- Location: Decatur, Indiana
Re: 77 GL1000 Resistor Assembly + Diodes
From Wikipedia;
A diode is a two-terminal electronic component that conducts current primarily in one direction (asymmetric conductance); it has low (ideally zero) resistance in one direction, and high (ideally infinite) resistance in the other. A diode vacuum tube or thermionic diode is a vacuum tube with two electrodes, a heated cathode and a plate, in which electrons can flow in only one direction, from cathode to plate. A semiconductor diode, the most common type today, is a crystalline piece of semiconductor material with a p–n junction connected to two electrical terminals.[5] Semiconductor diodes were the first semiconductor electronic devices. The discovery of asymmetric electrical conduction across the contact between a crystalline mineral and a metal was made by German physicist Ferdinand Braun in 1874. Today, most diodes are made of silicon, but other materials such as gallium arsenide and germanium are used.[6]
Also look here; https://electronics.stackexchange.com/q ... a-diode-do
,
A diode is a two-terminal electronic component that conducts current primarily in one direction (asymmetric conductance); it has low (ideally zero) resistance in one direction, and high (ideally infinite) resistance in the other. A diode vacuum tube or thermionic diode is a vacuum tube with two electrodes, a heated cathode and a plate, in which electrons can flow in only one direction, from cathode to plate. A semiconductor diode, the most common type today, is a crystalline piece of semiconductor material with a p–n junction connected to two electrical terminals.[5] Semiconductor diodes were the first semiconductor electronic devices. The discovery of asymmetric electrical conduction across the contact between a crystalline mineral and a metal was made by German physicist Ferdinand Braun in 1874. Today, most diodes are made of silicon, but other materials such as gallium arsenide and germanium are used.[6]
Also look here; https://electronics.stackexchange.com/q ... a-diode-do
,
1976 Goldwing Super Sport
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
1985 Honda Elite
1976 KZ900 Dragbike
1992 ZX7 Dragbike (KZ900 style motor w/NOS)
and a rotation of various purchases
Randakk approved Carb Rebuilder
-
- Silver Member
- Posts: 659
- Joined: Fri May 26, 2017 11:07 am
Re: 77 GL1000 Resistor Assembly + Diodes
The resistor assembly is associated with the reserve lighting unit. If that's gone, you don't need the resistors.
- tlbranth
- Platinum Member
- Posts: 1636
- Joined: Mon Jan 28, 2008 12:16 am
- Location: carnation, wa
Re: 77 GL1000 Resistor Assembly + Diodes
I don't do electronics and can't abide "black" boxes which is why I chucked the entire harness and built my own. Now if something goes wrong it'll be fixable without guesswork.
Terry
Don't own a Vanagon
Don't work at Boeing
Life is good
1999 GL1500 SE
2002 Honda VT750 "ACE"
1975 GL1000
1970 CB750
Don't own a Vanagon
Don't work at Boeing
Life is good
1999 GL1500 SE
2002 Honda VT750 "ACE"
1975 GL1000
1970 CB750
-
- Similar Topics
- Replies
- Views
- Last post
-
- 4 Replies
- 301 Views
-
Last post by wannabridin
-
- 3 Replies
- 385 Views
-
Last post by ericheath